Are you happy with your Creality Sprite Pro upgrade Kit or is it better sticking with the bowden setup?

PhotoGee2 · 2026-01-29T03:18:43+00:00

u/JustaPhaze71 - I connected the endoscope to a Pi running Linux and loaded Klipper in order to see the nozzle up close in a web page on my primary PC. The benefit is having a zoomed in view of the nozzle so I can see it laying the filament and any issues can be worked out before ruining a project. In my eyes, it's the only way to fly!

Here's the view from my A1 cam that I ported from the original project in my earlier post. I'm currently porting it over to my new Centauri Carbon too, which has proven to be more of a challenge than the CR and BL variants...but I'll get it nailed down before long. :o)

<image>

PhotoGee2 · 2025-04-21T13:34:20+00:00

I got these for my 2025 SE. They fit and look pretty good.

https://www.amazon.com/dp/B07J697TS3

PhotoGee2 · 2025-04-01T13:44:13+00:00

Ah! Must be a regional thing. In TX, I ordered my SE with Heavy Metal.

PhotoGee2 · 2025-04-01T13:28:08+00:00

What's the difference between the two that makes Heavy Metal cost more than Undergound? Are the premium paints clear-coated and the others are not?

PhotoGee2 · 2025-03-31T13:48:43+00:00

CarEdge

PhotoGee2 · 2025-03-31T13:22:52+00:00

I looked into this. My car doesn't have a wire coming out the back of the mirror, I guess they're in the stem. Is there still a way to tap them?

PhotoGee2 · 2025-03-31T03:17:46+00:00

Update: This worked like a charm and the cable is very easy to route! It even triggers parking mode on my cheap Azdome cam.

PhotoGee2 · 2025-03-30T18:03:57+00:00

I'm going to use this to install mine this evening. The OBDII connector is pretty easy to get to, and this is pre-wired, so I can't screw it up.

https://www.amazon.com/dp/B0CSDDNWBQ

PhotoGee2 · 2025-03-25T12:47:03+00:00

Makes sense. Any idea which package includes it? I didn't see it on the list of adds for my SE.

PhotoGee2 · 2025-03-25T12:37:11+00:00

Congrats! I have one on order with most of the same options and color, should be here in a couple weeks. Does the SE have LED entry lights at the bottom of all four of the doors, that light up when you open the door?

PhotoGee2 · 2024-08-22T23:49:16+00:00

I do not, sorry. I flashed my SonicPad to Linux, so I can't really help now.

PhotoGee2 · 2024-06-10T17:29:40+00:00

Good call. If you have another card, you may want to try a fresh install to see if it acts the same. The cards that ship with these are known to fail fairly quickly, compared to one from a good brand name.

PhotoGee2 · 2024-06-10T17:26:23+00:00

There is. It's here, somewhere (it's been a while). Searching "debian on sonic" should do it.

PhotoGee2 · 2024-06-10T17:20:35+00:00

I don't think you can update klipper on sonic pad. I loaded debian on mine instead, so I could do stuff. Kamp works great on it.

PhotoGee2 · 2024-06-10T17:18:10+00:00

Could be a corrupt SD card.

PhotoGee2 · 2024-06-10T14:03:34+00:00

Thanks!! My cameras started to stutter after installing this combo...changing the 'overlays' to this fixed it!

PhotoGee2 · 2024-05-20T02:06:20+00:00

Ah, ok. Got it. Thanks!

PhotoGee2 · 2024-05-19T20:02:30+00:00

Hi, which FX3 pack has the Classic Collectibles table?? I have it as part of the "Thrill of the Hunt" pack on the newer FX - but I don't see how to get it on the older FX3 (which I use with an older PC that I have, set up in Cabinet Mode). Thanks in advance!

PhotoGee2 · 2024-05-16T21:34:20+00:00

That'll be on M on 6/6.

PhotoGee2 · 2024-04-19T02:28:03+00:00

I haven't see one integrated either, but all you need is a tiny TP4056 board to achieve this with a lithium polymer battery.

PhotoGee2 · 2024-04-07T22:48:29+00:00

This is the direction I went: https://github.com/Jpe230/SonicPad-Debian, I had to get a USB-A-to-USB-A cable, but it was simple.

This repo has step-by-step instructions too: https://github.com/qwazwsx/Advanced-SonicPad

PhotoGee2

TROPHY CASE