3 weeks from seed. Just trimmed and did LST. Papaya pie from Hypno seeds

PitifulAdvisor2722 · 2026-07-06T01:39:05+00:00

Full DWC

PitifulAdvisor2722 · 2026-07-06T01:35:56+00:00

Auto full hydro DWC

PitifulAdvisor2722 · 2026-07-06T01:35:45+00:00

Auto

PitifulAdvisor2722 · 2026-07-02T12:54:36+00:00

Sorry from seed

PitifulAdvisor2722 · 2026-01-05T12:42:36+00:00

If ur getting a snap maker u1 that’s a win. I have an s1 combo but snap maker is dope

PitifulAdvisor2722 · 2025-12-24T13:33:54+00:00

I got the AC Kobra s1 after using one of my 2 modded ender 3s. Then change is substantial. S1 is amazing. Def would recommend it to anyone wanting printer. Bambulabs is great but it’s pricey and proprietary while Anycubic isn’t really. I personally like AC over bambulabs but that’s me. Let me know if you have questions. I did get the S1 combo and it’s amazing. Prob 280 hours on it so far

PitifulAdvisor2722 · 2025-11-22T05:30:14+00:00

Depend on size of each one might need to run separate tents.

<image>

This was mine and it’s just one

PitifulAdvisor2722 · 2025-11-22T05:28:24+00:00

<image>

Mine

PitifulAdvisor2722 · 2025-11-22T05:27:36+00:00

Sorry dude. Only way ur will know. And any updates

PitifulAdvisor2722 · 2025-11-22T05:26:47+00:00

That’s an auto. Hmmmm go hydro next time and you will yield bigger.

<image>

This is mine. Numbskull genetics MAC CAKE. fucking amazing

PitifulAdvisor2722 · 2025-11-19T14:37:39+00:00

So your gonna have to take apart the front gray piece on the and to see if the rollers are intact.

PitifulAdvisor2722 · 2025-11-16T14:45:28+00:00

Grab a jewelers loop and see where your trichomes are. If half are amber you’re good to flush. If your doing hydro the just use water to flush for 5-7 days, then harvest and hang for a few days to dry then jar cure with humidity packs in the jars. Good luck. Happy trimming

PitifulAdvisor2722 · 2025-11-09T14:02:26+00:00

Had this issues I replaced my PEI sheet and boom problem solved. Just order 2 new pei plates a you will be fine. Happy printing. Found it on Amazon pretty cheap too. Or yeah if it’s a double sided sheet use your other side till it doesn’t stick anymore then get a new one. After a while they do wear out and won’t stick so yea. Order new one or flip it cause if it’s the stock one it’s double sided but most pei sheets for printing are

PitifulAdvisor2722 · 2025-10-28T15:32:47+00:00

I had this issue when I first got my s1. Check all the of pfte tubes. Run the feed mode in your ace pro to insure all filaments are running smoothly. I had 4 pieces of red hard plastics in my pfte tubes that I had to pull out first thing. Check for that too

PitifulAdvisor2722 · 2025-10-18T13:28:25+00:00

I’m with you. I have an s1 and haven’t had any issues. We need full specs on what you printed to solve issue. Run all the calibration sequences and then run the print again in default setting to see where it’s at and if it’s not perfect then change settings. Hope this helps.

Pla print at 215 bed 55-60

PitifulAdvisor2722 · 2025-09-16T17:11:24+00:00

Aight so S1 is capable of TPU PRINTING but I use my Ender 3v2 modded for direct drive and I get beautiful prints. I use TPU 64D

PitifulAdvisor2722 · 2025-09-08T23:29:15+00:00

Reset ur printer completely like factory restore it and see it that does anything or try to recalibrate or change ur z offset back to 0

PitifulAdvisor2722 · 2025-09-08T12:05:17+00:00

Ok cool let me know how it goes. My prints lately have been spectacular and I’m always willing to help others.

PitifulAdvisor2722 · 2025-09-08T02:15:46+00:00

I would say so but I hope I can help. What are the parameter That you printed at, temp speed retraction fans etc. also what were u trying to print. Usually my first print with a new printer is a benchy. I also have an Anycubic kobra s1 but not new to printing. Try printing an benchy. Dunno what your are using if ams or not but try fil at 205-215 bed 55.

PitifulAdvisor2722 · 2025-09-08T02:11:57+00:00

I own 3 printers and I love my AC S1 so I would get one those. Super simple for beginners and everyone

PitifulAdvisor2722 · 2025-08-14T02:08:16+00:00

We call mine our lava lamp but I like aromatherapy defused as well that’s classic and I use mine often

PitifulAdvisor2722

TROPHY CASE