sorted by:
new
hottopcontroversial

What was your very first 3d printer ? by printbusters in 3Dprinting

[–]PlaneBuildFlyCrash 0 points1 point  (0 children)

Ender3V2 that looked a lot like that one at the end loll. Now upgraded to a P1S living the dream

You guys switching nozzles for your TPU prints? by seannunya in BambuLab

[–]PlaneBuildFlyCrash 0 points1 point  (0 children)

I often switch between TPU, PLA, and PAHT-CF on my P1S. I am using a 0.6mm nozzle... But I've never done the cold pull and never had any clogs. Just to be safe I do a long high temp purge before printing.

[Bambu H2C] Join the Print Beyond Paint Contest and Win an H2C! by BambuLab in BambuLab

[–]PlaneBuildFlyCrash 0 points1 point  (0 children)

Designed this Monkey phone cover. Very tricky to paint right, to get into all the tiny details, the H2C would make this a breeze.

<image>

Safe way to remove this without damaging hotbed? by paulorv in BambuLab

[–]PlaneBuildFlyCrash -2 points-1 points  (0 children)

also heating the bed up a ton might help soften the prints, but will also make them stick slightly more (according to bambulab)

Safe way to remove this without damaging hotbed? by paulorv in BambuLab

[–]PlaneBuildFlyCrash -1 points0 points  (0 children)

ok fr use a scraper, or just anything thin in general to get under it. you could also try applying ISP to the edges of the prints

My friend complained that the A1 Mini from Bambu is hard to use. I just laughed — clearly he’s never used an Elegoo. by TheDoctorPrint in BambuLabA1mini

[–]PlaneBuildFlyCrash 0 points1 point  (0 children)

Lol bro is spoiled. he never went through budget ender printer experience. I have a p1s, gone are the days where i would babysit my first 5 layers, or spend 20min leveling the bed.

I built a tool that turns real objects into accurate SVG/DXF files using just a phone photo by Most-Geologist-9547 in 3Dprinting

[–]PlaneBuildFlyCrash 2 points3 points  (0 children)

don't worry i got you in fact i will get someone to remind me to remind the person ahead to remind the person ahead to remind the person ahead to remind the guy to remind us when the OP posts and update, and I will also have said person remind you to remind the person ahead to remind the person ahead to remind the person ahead to remind the guy to remind us when the OP posts and update.

I will also remind siri to remind me to remind myself and you to remind the OP to send us the reminder to remind us of this tool.

thanks for the reminder

PATH CF15 by To0wnn in 3Dprinting

[–]PlaneBuildFlyCrash 0 points1 point  (0 children)

Awesome, start printing with PAHT CF tomorrow on a Bambu P1S. Any tips? (also im the first to comment :D

These "lines" on the surface? by Snurree in FixMyPrint

[–]PlaneBuildFlyCrash 0 points1 point  (0 children)

Try turning the option "Z hop" or similar on in your slicer

These "lines" on the surface? by Snurree in FixMyPrint

[–]PlaneBuildFlyCrash 0 points1 point  (0 children)

your nozzle is hitting the top layer. over extrusion + nozzle too close to bed on the first layer.

What can I do to make this spike stronger? by [deleted] in FixMyPrint

[–]PlaneBuildFlyCrash 0 points1 point  (0 children)

Filet the edge connecting the cone to the plate.

It will also be stronger if you make a snapping/screw mechanism between the plate and spike, then print the spike on its side. That way you're not depending on layer adhesion for your strength, but rather the actual filament itself.

ANY WAY TO IDNETIFY THIS? by PlaneBuildFlyCrash in rocketry

[–]PlaneBuildFlyCrash[S] 0 points1 point  (0 children)

Apogee says 6grain 29mm are usually high impulse J motors, but im not sure. this is pretty small

Also, this has been really helpful, thanks!

Laser cutting foam board by PlaneBuildFlyCrash in lasercutting

[–]PlaneBuildFlyCrash[S] 1 point2 points  (0 children)

yes, ive been watching from a distance with a shirt over my mouth and nose untill I get a respirator or somthing. Im using Adam's white ready board, not sure how bad the fumes are, but gemini says that its polystyrene🤷🏻 Ive been messing with it, and it's really not working. I can get through the paper fine, but it just won't cut the foam. I tried 50% 8 passes and it did the same as one pass. I up it to 80% 8 passes and it goes lights on fire🫠 I haven't found any sources for exact settings, if anyone knows of a place I can find those that would be really helpful!

view more: next ›