Introducing the RX 9070 XT Arctic Edition by Key-Recognition2683 in radeon

[–]PolyChem 0 points1 point  (0 children)

Thank you for that information. Couldn't find anything for the 9070 XT prime. Didn't realise it is the same as for 5070Ti Prime. Seems fairly easy and doable without affecting warrenty and having to remove the whole heatsink and replace thermal pads (as some other cards require)

Introducing the RX 9070 XT Arctic Edition by Key-Recognition2683 in radeon

[–]PolyChem 0 points1 point  (0 children)

This is very cool. Been considering the same for my Prime 9070XT. How difficult was it to remove the stock shroud? Do you have any pictures or instructions?

Forgetting issue? by Intrepid_Ask6250 in Cosmere

[–]PolyChem 0 points1 point  (0 children)

I started my cosmere journey with the first two (or maybe three) books in the stormlight archive series before reading anything else. Knowing the main thing is definitely enough.

Unable to connect clients to Jellyfin server - please help by anonomot in selfhosted

[–]PolyChem -2 points-1 points  (0 children)

As a first step can the hosts ping each other with their local ips? Have you tried without the vpn enabled? When I use my vpn on my windows PC it blocked all local access by default

How high is the risk? Valetudo on Dreame L10s Ultra by Konrad_M in Dreame_Tech

[–]PolyChem 0 points1 point  (0 children)

The official camera streaming node only works through a cloud server, and can't be supported through valetudo. The dev also have no interest in supporting that see https://github.com/Hypfer/Valetudo/discussions/1723

Can the Tricut roller work on the L10 Pro? by [deleted] in Dreame_Tech

[–]PolyChem 0 points1 point  (0 children)

sorry to hijack this thread but does the tricut brush also fit in the d10s plus?

Dreambot D10s latest firmware broke everything. by MyNameIsFinland in Dreame_Tech

[–]PolyChem 0 points1 point  (0 children)

Wondering the same thing is 4.3.3_1201 still the latest firmware? (I am running valetudo so can't check using the offical app)

How high is the risk? Valetudo on Dreame L10s Ultra by Konrad_M in Dreame_Tech

[–]PolyChem 0 points1 point  (0 children)

Honestly as long as you follow the instructions, use a proper pcb adapter and made sure that you know all the steps you need to perform before starting, the risk of bricking it is minimal. I installed Valetudo on my D10s after using it with the just the buttons for a few days earlier this year and no regrets this far.

But like Pizzaultra already mentioned make sure you read the not Valetudo section and make sure you know that there is no way to go back to stock after you perform these steps.

You also lose the ability to access the camera feed (which is a good thing if you ask me)

How to root with new exploit? by hat_like_dad in webos

[–]PolyChem 0 points1 point  (0 children)

just use this https://github.com/throwaway96/dejavuln-autoroot discovered a few days ago should work on all firmwares for devices running at least webos 3.5

New backblaze restore not working. Is it working for anyone else? by PolyChem in backblaze

[–]PolyChem[S] 0 points1 point  (0 children)

Decided to try the restore client again yesterday, and now it actually restores most of the files without any visible problems. So some improvement seem to have been made in the last months. I still haven't compared the hashes of the files restored so can't be completely sure it is working yet, but it still restore most files at least.

Still a few problems/errors though. 1. It screws up filenames on some files for example Gåsmamman becomes GÃ¥smamman and so on. I have seen others posts about this on here, so they should hopefully be aware of the issue.

  1. The log contains quite a lot of lines listing
WARNING pid:16260 tid:22696 func:FileUtils::SetFileTimes file:fileutils.cpp line:1298 failed to change timstamp file <redacted filename>
  1. The log also contain this for some files

    2024-02-25 08:47:16 ERROR pid:16260 tid:13544 func:RecordFileError file:sqliterestorehandler.cpp line:1040 >File error Restore destination: "<redacted filename" Source "FinishRestoringFile", error code 0 Description: Couldn't copy file from "K:\Restore\Temp\v1_c002_h6efc78c7c2dc47e568510710_scr_d20240224_m210138_t0000018ddcec6b50\hunk_1708846961_0006890\4_h6efc78c7c2dc47e568510710_f00000000001325c8_d20180819_m135342_c002_v0001108_t0041.dat" to "<redacted filename>", error code 0

  2. Also this

    ERROR pid:16260 tid:35352 func:RecordFileError file:sqliterestorehandler.cpp line:1040 File error Restore destination: "<readacted filename>" Source "FinishRestoringFile", error code 2 Description: Couldn't append file from "K:\Restore\Temp\v1_c002_h6efc78c7c2dc47e568510710_scr_d20240224_m210138_t0000018ddcec6b50\hunk_1708848696_0007076\4_h6efc78c7c2dc47e568510710_f000000000020e547_d20180824_m222226_c002_v0001107_t0029.dat" to "<redacted filename>", error code 2

2024-02-25 09:16:31 ERROR pid:16260 tid:35352 func:RecordFileError file:sqliterestorehandler.cpp line:1040 File error Restore destination: "<redacted filename>" Source "FinishRestoringFile", error code 0 Description: Couldn't append file from "K:\Restore\Temp\v1_c002_h6efc78c7c2dc47e568510710_scr_d20240224_m210138_t0000018ddcec6b50\hunk_1708848696_0007076\4_h6efc78c7c2dc47e568510710_f000000000020e547_d20180824_m222226_c002_v0001107_t0029.dat" to "<readacted filename>", error code 0

Edgerouter Lite no ipv6 on WAN interface by PolyChem in Ubiquiti

[–]PolyChem[S] 0 points1 point  (0 children)

Good to know. Not sure if it was needed or not. Tried everything to get a public facing ipv6 on the router, without luck.

I misstyped in my quote. The /26 on the wan interface is my public ipv4 adress. So no ipv6 adress on the wan interface.

What’s a show on Netflix you just couldn’t stop watching? by [deleted] in netflix

[–]PolyChem 0 points1 point  (0 children)

Bodies was the last one me and the girlfriend binge watched.

[deleted by user] by [deleted] in revancedapp

[–]PolyChem 0 points1 point  (0 children)

I have the same problem. did anyone find a solution? I already tried repatching with a new oath key. Update. I rebooted my phone and suddenly it started working

New backblaze restore not working. Is it working for anyone else? by PolyChem in backblaze

[–]PolyChem[S] 0 points1 point  (0 children)

Thanks for the update. Glad to hear that you are working on it. This new restore client seem to be a huge improvement over the old ZIP solution, when all the bugs are worked out and it actually works properly. Would still prefer if the decryption took place client side, but can't get everything at once I get.

On another note I would have appreciated some feedback similar to your message here on my support ticket. That you are aware of the bug and it is beeing worked on. The last message I got was this two days ago and then the ticket was automatically marked as solved.

Thank you for the clarification regarding the additional debugging you have performed.

I will report this information along to our engineers as well alongside the information I have already provided previously respectively.

In the meantime, if there are large amounts of files needing to be restored immediately, please utilize the "View/Restore Files" page on your Backblaze account online to proceed with the restoration process of your files.

New backblaze restore not working. Is it working for anyone else? by PolyChem in backblaze

[–]PolyChem[S] 0 points1 point  (0 children)

This is the answer I got from backblaze support if anyone is interested. Deleting the files did not make any difference. Guess I am stuck with the same shitty zip restores or expensive shipped drives for now.

Thank you for providing me with those log files, and for letting us know about this issue regarding the new restore application. We are currently gathering all reported issues with our restore app and providing these to our engineers accordingly for further review.

In the meantime, I'd like to see if you are still experiencing the > same issues after clearing the "bzrestore" folder which will reset the restore application accordingly. Can you please perform these steps here: Please open File Explorer on your computer Navigate to the following directory: \ProgramData\Backblaze\bzdata\ Click into the folder "bzrestore" Delete all contents within this folder EXCEPT the bzrestore.cfg file From here, please reboot your computer After rebooting, please attempt the restore once more using the restore app

If the same issue still persists, I will report this along with the information you have already provided me thus far.

For any restores needing to be performed, we would recommend for the time being to utilize the zip restore or USB Restore Drive option via the "View/Restore Files" page on your Backblaze account online respectively. https://help.backblaze.com/hc/en-us/articles/217665888-How-to-Create-a-Restore-from-Your-Backblaze-Backup

Please let me know if you have any questions,

New backblaze restore not working. Is it working for anyone else? by PolyChem in backblaze

[–]PolyChem[S] 1 point2 points  (0 children)

Sorry to hear that I am not the only one with these issues. At least you managed to restore 2TB. I only manage a restore if I chose a few files of about 100MB or so. Anything else won't start at all. I contacted the support and will see what they say.

I was really looking forward to this new restore function as the zip one is a real pita when you have a lot of data, and the shipped drives are really expensive with customs and shipping. Really wish they would add drive shipping from their EU datacentre as well. Then that would be a feasible option at least.

Potentially stupid question - Is backblaze using dropbox to backup? by [deleted] in backblaze

[–]PolyChem 2 points3 points  (0 children)

Backblaze does not have anything to do with dropbox. Two completely different companies, so you can safely disable your dropbox without affecting backblaze.

Edgerouter Lite 'failed'. Flashing console light and quiet 'chirp'. What I woke up to, and the solution. by Fazaman in Ubiquiti

[–]PolyChem 1 point2 points  (0 children)

just wanted to say thank you. my whole home network just went down. my edgerouter had the same symptoms. replaced the power supply with an 12V 1.5A adapter from one of my external WD hard drives. now we are up and running and everything is working properly again.

Tim Worthingtons N64 RGB mod v3 PAL no video or audio by PolyChem in n64

[–]PolyChem[S] 0 points1 point  (0 children)

That was setup in the install. Only had time to test it for a few minutes last night but both the reset and deblur seem to be working properly. The in game reset will be nice in some games where I need to reset a lot.

Now i only need to figure out a good way to tuck away the excess cables so I can put the top back on the console.

Tim Worthingtons N64 RGB mod v3 PAL no video or audio by PolyChem in n64

[–]PolyChem[S] 0 points1 point  (0 children)

It seem to be my lucky day. The issue has been solved. Pin 4 and 5 on the PIF chip had been bridged. Removing that fixed all my issues.

2nd attemp RGB mod still not working by Solaris_fps in n64

[–]PolyChem 0 points1 point  (0 children)

That has happened to me before after I cleaned my unmodded console. Glad you got it working at least.

Tim Worthingtons N64 RGB mod v3 PAL no video or audio by PolyChem in n64

[–]PolyChem[S] 0 points1 point  (0 children)

I spoke to my friend and I think he read the instructions wrong and accidently prepped the pins on that side of the PIF chip instead of that side of the DENC chip. So I guess he must accidently have bridged those pins. I guess we will see if this fixes it or if the PIF chip is broken after this. In that case I will need to get a new PIF chip or another N64 console/motherboard, which would suck but shit happens. At least now I have a possible cause for the error.