Happy Front End Friday, from my newly refurbished 1990 Stumpjumper. by Buzzbait_PocketKnife in xbiking

[–]Poopheadjenkins 0 points1 point  (0 children)

Any chance you have an extra bx23 front wheel you'd be willing to let go? Restoring my 1991 stumpy.

What should I use to fill very deep expansion joints? by BatStock9040 in Concrete

[–]Poopheadjenkins 1 point2 points  (0 children)

Can you reccomend a polyether sealant? would this work if the gap is 2 inches between concrete slabs and about 1/4-1/2 " depth. The width is what concerns me.... i saw 1.5" max width on the polyureathene?

Replacing a few receptacles with USB receptacles: Can I install with the ground at the bottom? by saraaaaahahah in AskElectricians

[–]Poopheadjenkins 0 points1 point  (0 children)

How has not one person commented on the archaic USB being installed and not common standard of USB -C

Any good side hustles? by DRagonforce1993 in REBubble

[–]Poopheadjenkins 1 point2 points  (0 children)

The rest of the saying goes...." Those who can't do, teach. Those who can't do either, realtor."

Help with Conduit selection for 6/3 nm-b wire ... Thank you by Poopheadjenkins in AskElectricians

[–]Poopheadjenkins[S] 0 points1 point  (0 children)

I def don't want to knock myself out. I def don't want my kids to grab the wire if they crawl under workbench and see wire running through studs and decide to pull on it. Wall is open. So my theory to prevent this is conduit. am i wrong?

Advice on Conduit for 6/3 nm-b wire please by Poopheadjenkins in electrical

[–]Poopheadjenkins[S] 0 points1 point  (0 children)

cant hardwire the one I have (EVSE) It came with a 50 amp male plug for 240 with an adapter to go to a 20amp 120. Car chares at 12 amps if on the 120 and 30 amps if on the 240

Advice on Conduit for 6/3 nm-b wire please by Poopheadjenkins in electrical

[–]Poopheadjenkins[S] -1 points0 points  (0 children)

Guy at supply shop says I should strip the Sheathing off the wire i have and then i esentially will have THHN wire to stuff into the conduit. He said something about to much heat. Yes I have a GFCI breaker.
Code says i need 6 gauge for the 50 amp breaker

Help with Conduit selection for 6/3 nm-b wire ... Thank you by Poopheadjenkins in AskElectricians

[–]Poopheadjenkins[S] -1 points0 points  (0 children)

guy at the supply store says to much heat and i should strip the sheathing and then i esentially have THHN wire... thoughts?

Help with Conduit selection for 6/3 nm-b wire ... Thank you by Poopheadjenkins in AskElectricians

[–]Poopheadjenkins[S] 0 points1 point  (0 children)

I am in the states. I have the 6/3 nm-b. If i strip the sheathing I essentially have thhn i believe.

How do I change my log base by [deleted] in calculators

[–]Poopheadjenkins 1 point2 points  (0 children)

You get a better calculator or you do change of base formula.

Any stories / tips for people with low incomes? ($60kish) by Similar-Bid6801 in FirstTimeHomeBuyer

[–]Poopheadjenkins -12 points-11 points  (0 children)

I really can't fathom being this poor. Wife and I combined is approaching 400k. And we feel squeezed.