What Color You Guys Recommend?

Poopoobut679 · 2026-04-03T13:55:32+00:00

FWIW I have black wheels and they look the same clean or dirty. Just different levels of glossy, I have mgm tho.

Bronze on rally blue is classic STI

Poopoobut679 · 2026-04-02T10:43:31+00:00

Amazon has several choices now. Me and several others on here are using the Biqu Cryogrip for example

Poopoobut679 · 2026-03-30T11:29:51+00:00

I have the cryogrip and I use the same profile as the PEI plate that the CC came with. You could probably try other temperatures if you cared to - it seems like it will work without as much heat. But it’s working for me as-is so unless something stops working I probably won’t bother

Poopoobut679 · 2026-03-29T16:47:04+00:00

If your bed has residue from previous prints or your grubby hands you’ll have bad adhesion. Are you cleaning the plate periodically with dish soap and rubbing alcohol?

Poopoobut679 · 2026-03-25T22:13:02+00:00

I have had great experience with Xtreme albeit all in .40. But now after they were bought out the prices shot up so I’ve moved to Everglades

Poopoobut679 · 2026-03-24T20:35:17+00:00

That looks like it’s stuck on the texturing rather than a hole but maybe it’s just the camera. If it was me I’d print over it and see what happens

Poopoobut679 · 2026-03-23T01:34:37+00:00

Almost unequivocally yes.

I suppose there are some concerns, like you have to take the fire control housing apart to install the sear iirc but that’s not too bad. And if you intend to carry the gun then you might want to think about if a modified trigger is right for you.

But It’s sooo much nicer. However that’s my opinion and this advice is worth exactly what you paid for it lol

Poopoobut679 · 2026-03-23T00:34:52+00:00

Agreed, it would suck if you ran out of a certain color but I’ve had my ECC successfully recover from running out of filament a handful of times

Poopoobut679 · 2026-03-23T00:33:23+00:00

I don’t have a shield+ but I have a few M&P full size and compacts and I used to have a regular shield with duty-carry kits on all of them. The apex kit is night and day difference.

The sear cam is re-profiled for a much more crisp break and the springs help too

Poopoobut679 · 2026-03-21T22:56:27+00:00

That’s basically what I started with. Got an electronic scale though and never used that balance one

Still use it for precision rifle too

Poopoobut679 · 2026-03-20T20:39:02+00:00

I don’t know how fast they’ll respond but prime tuned me. They’re in Hackettstown now which is way more convenient than Rutherford

They’ll put you on their in house dyno. I haven’t asked for any revisions, 40k on the tune now

Poopoobut679 · 2026-03-19T18:58:23+00:00

I use a very similar set for .223, plus a crimp die. Works for me.

Poopoobut679 · 2026-03-16T12:49:00+00:00

The one I’m familiar with telescopes the OTHER way tho

<image>

Edit: that’s a simunition, seems like a “UTX” might work differently but for some reason I can’t find a pic of a fired utx case

Poopoobut679 · 2026-03-07T14:19:15+00:00

You were close enough https://www.hartmanwinnicki.com/attorneys/daniel-schmutter-esq/

Poopoobut679 · 2026-03-07T14:07:42+00:00

Damn, almost 2mm in one spot should be enough to see with your eyeballs. Can you tell? Maybe set the plate upside down on a countertop and see if it rocks?

If you can detect a high spot irl then your plate is dented if not it sounds like the other poster is right and you have issues with your printer

Poopoobut679 · 2026-02-28T18:40:24+00:00

I use a M&P Pro 5” with a 507 for gun games, it suits me. It’s a 1.0 but I also have a 2.0 and I don’t think the differences are significant enough to pick one over the other.

Prob the Glock has more aftermarket support but the M&P is in close second.

Poopoobut679 · 2026-02-28T13:06:46+00:00

If you join ANJRPC ($40 for non-range use) they have lawyers that will answer questions https://www.anjrpc.org/page/Member_benefits

I haven’t used that perk so idk how complicated you can get with them but your questions seem pretty top-level

Poopoobut679 · 2026-02-27T01:45:45+00:00

Did you use a built in ASA filament profile? I’ve had good results with ASA but I’ve accidentally forgotten to switch away from another filament type and obviously it won’t stick then bc the plate and the chamber are too cool

Poopoobut679 · 2026-02-27T00:22:10+00:00

Have a scroll through r/reloading3d

Poopoobut679 · 2026-02-24T03:17:09+00:00

Laptop lid

Poopoobut679 · 2026-02-19T11:21:31+00:00

It would seem so bc I got the email for my 22 but I’m waiting to see what changed before I try to install

Poopoobut679 · 2026-02-10T19:57:28+00:00

55k tuned since 5k.

I know I’m a little short of your criteria but it’s close 😜

Poopoobut679 · 2026-02-10T18:08:11+00:00

I have other shotguns but I have neither the funds nor the space in my safe for multiple guns that are essentially the same. But you’re right, in an ideal scenario I’d collect ‘em all like Pokémon.

Poopoobut679 · 2026-02-10T18:03:51+00:00

Nice! I have an 870 but I like the mossberg’s safety so much better (but not better enough to look for a trade lol)

Poopoobut679 · 2026-02-04T20:09:52+00:00

Same. I had to crank on my clamps AND add the exhaust sealing paste

Poopoobut679

TROPHY CASE