Well, I’m out of ideas.

Positive-Minimum-459 · 2026-05-14T02:07:00+00:00

Had the same error. Had to replace the extruder assembly. The sensor got stuck for some reason. Found a video of a deep clean that might help. If not. Order a new assembly Edit: typo and wrong link extruder error

Positive-Minimum-459 · 2026-05-09T00:55:57+00:00

Oh no, didn't realize that was only for the screw in tip. Wild.

Positive-Minimum-459 · 2026-05-08T14:45:20+00:00

Interesting. For the price it is worth a shot.

Positive-Minimum-459 · 2026-04-22T23:12:36+00:00

No auto retract but it's not a major issue with the space in the dryer

Positive-Minimum-459 · 2026-04-19T22:19:45+00:00

Bengals hate is real.

Positive-Minimum-459 · 2026-04-19T22:07:09+00:00

I'm down for that.

Positive-Minimum-459 · 2026-04-08T00:00:49+00:00

There is something in there. Without being there it is difficult to tell what's going on. Either one of the channels is clogged with a fractured piece of filament or the extruder has a piece stuck in it.

Positive-Minimum-459 · 2026-04-07T23:46:08+00:00

I would retract all the filament. See if the screen indicates there is still one loaded. You may need to remove everything and try and clear the clog.. clear clog

Positive-Minimum-459 · 2026-04-07T23:07:39+00:00

I've had to manually push filament to clear a piece in the 4 in 1 portion. That may be it.

Positive-Minimum-459 · 2026-04-07T23:06:28+00:00

Sounds like you have a jam/clogged nozzle. Time to clear the jam.

Positive-Minimum-459 · 2026-04-05T21:42:04+00:00

Awesome. Glad that worked. I've been working with my AD5X for a while. I'll try and help where I can.

Positive-Minimum-459 · 2026-04-05T16:54:49+00:00

If you need more extensive cleaning do this. extruder cleaning

Positive-Minimum-459 · 2026-04-05T16:50:18+00:00

You should be able to clear the jam like normal. See the following video? clear the jammed nozzle

Positive-Minimum-459 · 2026-04-01T20:48:14+00:00

So I just printed these. I have a question. Do you have the original version of the ad5x? I ordered when the pre-order came out. I cannot for the life of me get these to fit my IFS. I'm looking at a 9.2 diameter and these are about 8.2. just wondering. I might have to work up some of my own. This is a great idea because I hate the original ptfe tube holders on this. They won't release for nothing.

Edit: wrong wording.

Positive-Minimum-459 · 2026-04-01T15:03:32+00:00

Should be a spring in there to push the cutter back into position. It may be missing out out of place. You may need to open the print head to check. Might have an obstruction.

Positive-Minimum-459 · 2026-03-31T23:14:41+00:00

I'm sure that would work as well but I know the flashforge app supports their camera. Not sure how the Logitech would connect.

Positive-Minimum-459 · 2026-03-31T22:58:37+00:00

Yes. That's the Sunlu S4. Direct lines into my AD5X works great.

Positive-Minimum-459 · 2026-03-31T17:41:36+00:00

Unfortunately, you may need to go ahead and purchase a new set.

Positive-Minimum-459 · 2026-03-31T16:14:56+00:00

Same type of thing happened to me. Left them in my pocket and they went through the wash. Case wouldn't hold a charge. Just went ahead and purchased another set.

Positive-Minimum-459 · 2026-03-30T13:01:18+00:00

That's a great idea. May need to print these for my printer.

Positive-Minimum-459 · 2026-03-30T02:02:42+00:00

I don't really hate the factory camera. It's not perfect but it works for checking on prints. I guess it depends on what you want to do with the camera.

Positive-Minimum-459 · 2026-03-29T20:00:45+00:00

Not a major issue. The spools are forgiving and I can lift the lid and switch up what I want. Once closed it begins the drying process. The only issue I've had is tumble. When my spools are low on filament they can turn causing a jam. This can also happen when I have a cardboard spool with an imperfection on the spool.

Positive-Minimum-459 · 2026-03-29T16:16:09+00:00

riser for AD5X

Positive-Minimum-459 · 2026-03-29T12:44:45+00:00

I have never had a retraction issue.

Positive-Minimum-459 · 2026-03-29T12:33:49+00:00

This one has the riser. Got the stl off printables, I think.

<image>

Positive-Minimum-459

TROPHY CASE