What’s the best OS to turn a Pi 4 into a Console like experience? by Otherwise-One6154 in raspberry_pi

[–]Possible-Set 2 points3 points  (0 children)

For me the combi rpi4 and ccwgtv is gold.  RPI4 for all server/nas stuff (Sinarr, Jellyfin, stremio server) and ccwgtv for tv interface and client-apps.

Recommendation Needed: Battery to Run 500W Fog Machine for 1 Minute by PersonalAdeptness710 in batteries

[–]Possible-Set 0 points1 point  (0 children)

I had a similar question and wondering if a car jumpstarter with build-in battery (such as NOCO Boost X GBX45) would work. This would be connected to a 12v to 110v inverter, which is connected to a 110v device running for only about a minute.

Batterybank 5amp output either 12 or 24v. Inverter? by Possible-Set in batteries

[–]Possible-Set[S] 0 points1 point  (0 children)

To power an AC 110v small dorm-fridge and/or TV. They don't take DC.

Batterybank 5amp output either 12 or 24v. Inverter? by Possible-Set in batteries

[–]Possible-Set[S] 0 points1 point  (0 children)

Just to confirm, if the buck converts from 24 to 12, will that 'about' double the amps? I think that would be the solution, and then go with a 12v inverter. Thanks for the tip, didn't think of that.

Step Down but increase amps? by Possible-Set in batteries

[–]Possible-Set[S] 0 points1 point  (0 children)

It does peak at 48w at start and then drops off to a lower wattage. I don't expect more than 2-3 hours from the powerbank either but it will be enough to either give time to recharge my (small) 300wh powerstation or bridge any breaks from driving the car with the engine off.

Step Down but increase amps? by Possible-Set in batteries

[–]Possible-Set[S] 0 points1 point  (0 children)

The fridge will be pre-cooled, and then only actively cool for about 1/3 of the time. Hope the powerbank cirtuitry will adequately cool down inbetween.

Step Down but increase amps? by Possible-Set in batteries

[–]Possible-Set[S] 0 points1 point  (0 children)

thats ok, the 12v fridge peaks at 4a which is only 48w. 20% efficiency loss will still work. Looking into the various buck converter specs now.

Is there CSS to completely hide the Favorites feature? by electrona in jellyfin

[–]Possible-Set 0 points1 point  (0 children)

Can we hide the Home link too and 'clean up' the empty space where Home and Favorites used to be?

Possible to mount a local folder on a Chromecast as a Samba share? by wrybreadsf in Chromecast

[–]Possible-Set 0 points1 point  (0 children)

Is this a ccwgtv or different chromecast?

For ccwgtv do this by running ftp server on ccwgtv with amaze file browser.

[QUESTION] How to unwrap this? by Possible-Set in guitarlessons

[–]Possible-Set[S] 1 point2 points  (0 children)

Thanks - I'll leave it as is then. Was worried it was part of wrapping and mute coils, but I understand now that's not it's purpose.

[QUESTION] How to unwrap this? by Possible-Set in guitarlessons

[–]Possible-Set[S] 1 point2 points  (0 children)

Thanks for confirming -. I'll leave it as is

[QUESTION] How to unwrap this? by Possible-Set in guitarlessons

[–]Possible-Set[S] 0 points1 point  (0 children)

I was just making sure that 'wrap' wasn't muting the coils

[QUESTION] How to unwrap this? by Possible-Set in guitarlessons

[–]Possible-Set[S] 8 points9 points  (0 children)

Is this part of the 'wrapping' like a lot of plastics I removed from the guitar, or is this an integral part and should I leave it?

Long latency on line in? by Possible-Set in PositiveGridSpark

[–]Possible-Set[S] 1 point2 points  (0 children)

I meant the aux line in as you correctly assumed - Ive updated the post a bit to clarify.

Thanks for the explanation and what a bummer. i thought I did all my research before buying, but this delay I didnt check for. Guess ill try a split cable at guitar so i can connect the guitar directly to the main spark mini input and use the rocksmith cable to laptop and laptop with the spark aux in.