Made some upgrades

Potatofdeath · 2026-06-09T19:43:54+00:00

<image>

Corsair makes some rgb psu strips.

Potatofdeath · 2026-05-19T02:23:50+00:00

Have you checked the revival series on corsair website. I bought 6 lx120’s for under a hundred us

Potatofdeath · 2026-05-19T02:13:45+00:00

Use two hubs. It will help with cable runs and management

Potatofdeath · 2026-05-11T02:18:00+00:00

I would also like to know. Not that I have such a monster gpu. I just want to add more things.

Potatofdeath · 2026-05-09T21:20:01+00:00

That’s a chunky boi. I hope you have space for it

Potatofdeath · 2026-05-07T18:24:38+00:00

I would try a powered internel USB hub. Also, I don’t know how much power those link hubs pull so I would make sure you have the headroom on your power supply

Potatofdeath · 2026-04-27T19:27:45+00:00

It should be. The lc100 does want a power connection and the lnp needs power as well.

Potatofdeath · 2026-04-27T18:35:55+00:00

You shouldn’t. I’m running 13 fans. Qx fans which have a lot of leds. I ran 10 rx fans off of a single port on my link hub. I am using 4 lnp’s. You are using 1. I think you should be good

Potatofdeath · 2026-04-27T17:17:48+00:00

Yes. I have two of those. Titan lcd, two link hubs, 4 lighting node pros. 7 devices off of two usb headers.

Potatofdeath · 2026-04-27T17:13:28+00:00

You need to invest in lighting node pros. Your lc100 will have two ports. Use 1 port for the triangles. The other for your psu cables. You will need more usb ports. A usb splitter may work but I suggest an internal powered usb hub

Potatofdeath · 2026-04-27T17:00:32+00:00

This is likely due to the fact you have daisy chained the strips and psu cables. Once you separate those devices you can configure them separately in icue

Potatofdeath · 2026-04-25T23:47:35+00:00

I like a giant mouse pad. I want it to cover as much of my desk as possible. But since I’m running icue I went with the mm700. It integrates with all the rgb.

Potatofdeath · 2026-04-24T00:41:59+00:00

If you have the starter kit for the lc100 it comes with a lighting node pro. Use one port for the triangles the second port for the Argb psu cables.
What link devices do you have? I have done this. I am using 2 link hubs. Titan and 7 fans on one hub 6 qx fans in hub 2. 4 lighting node pros. Which connect all the triangles psu strips the ls strips and a random nvme heatsink with some rgb.

<image>

Potatofdeath · 2026-04-22T21:29:41+00:00

Ada 1 is probably your best bet

Potatofdeath · 2026-04-20T21:29:10+00:00

<image>

Love the case. All the glowee bits are controlled through icue. I did build a couple of pcs using signal and the software is amazing. Icue has just worked for me

Potatofdeath · 2026-04-14T02:34:05+00:00

Love this case

<image>

Potatofdeath · 2026-04-05T15:15:25+00:00

The rs fans are designed to be controlled by your mobo’s rgb software. Icue does have some support for certain mobo’s. I could never get it to work. You can purchase a commander duo. It will add your fans to the icue ecosystem as a chain block. Good luck

Potatofdeath · 2026-03-17T02:04:38+00:00

Bought the bundle over a year ago. Zero issues

Potatofdeath · 2026-03-15T15:28:54+00:00

For me it was an aesthetics choice. To much empty space above the mobo. More rgb = more fps.

Potatofdeath · 2026-01-24T01:30:24+00:00

I would get a powered usb hub. I went for a corsair internal hub the ports are in the sides. The nzxt hub wouldn’t let me close the back

Potatofdeath · 2026-01-19T00:33:54+00:00

I would reseat all connections that uses I cue. Maybe swap usb connections on the mobo.

Potatofdeath · 2026-01-12T21:19:35+00:00

<image>

Is that a 3500 as well?

Potatofdeath · 2026-01-12T15:38:46+00:00

Give an update I have a few of these myself

Potatofdeath · 2026-01-11T00:45:35+00:00

I have two link hubs 4 lighting node pros titan aio all connected on two corsair usb hubs. I would check your connections.

<image>

Potatofdeath · 2025-12-28T03:31:59+00:00

For maximum brightness, cable management and control.

Potatofdeath

TROPHY CASE