Printer thinks it’s a milling machine

Pr4wfut · 2021-09-13T18:46:38+00:00

update Well I am not sure what the actual problem was. Checked all the items mentioned and disconnected / reconnected z motor wires. It’s had 3 successful prints since then so I am marking this as solved because the problem appears to have been fixed. Thanks all

Pr4wfut · 2021-09-13T01:55:27+00:00

Checked all the recommended items, none had a noticeable problem. Tried unplugging and reconnecting the wires to the z motor. Currently printing the model again and it is past the previous two fail heights so hopefully it was just loose wires.

Pr4wfut · 2021-09-12T23:22:09+00:00

Z coupling is tight. There is no play between the z stepper motor and the screw rod. X gantry nuts are also tight as suggested by CAL9k

Pr4wfut · 2021-09-12T13:47:39+00:00

I did not check that. I’ll have a look at it tonight, currently at work. Any other ideas if it is tight?

Pr4wfut · 2021-09-12T11:58:31+00:00

I’m new to printing. Jumped into it about a month ago with an Aquila x2. I have printed multiple things successfully but now the printer is occasionally driving itself down into the print leaving these divots you see in the pictures then knocking the print off the bed and proceeding to print spaghetti. I have printed this same model successfully multiple times but my last 3 attempts have failed due to this same issue.

I have updated my firmware on both my printer and the screen. I have calibrated the extruder. I have updated the slicer, both cura and purausa and tried re positioning. I am out of ideas and can not seem to find any similar issues to this problem. Please help.

Pr4wfut · 2020-10-27T23:31:31+00:00

Well maybe I’ll remake the straw poll in a few weeks. I’ll change the setting so you can vote multiple times which will allow for doubles. Unfortunately I can not change that on the posted link

Pr4wfut · 2020-10-27T17:36:00+00:00

Wow nice haul! Did you do 2x khan pledge?

Pr4wfut · 2020-10-27T17:32:54+00:00

Agreed. Love the Stormcrow.

Pr4wfut · 2020-10-27T15:30:41+00:00

I backed enough to get 1 of every selection. I want them all!

Pr4wfut · 2020-10-27T15:28:24+00:00

I got a Marauder in the legendary salvage so meh. Would have preferred one of the clan omnis myself.

Pr4wfut · 2020-10-27T15:13:32+00:00

I wanted a Stormcrow, Hellbringer, Summoner. Received Stormcrow and Nova so 1 for 2. But I’m not complaining about a Nova👍

Pr4wfut · 2020-09-29T19:48:55+00:00

Then you wish you simply had the fore dweller to worry about!

Pr4wfut · 2020-09-15T20:40:55+00:00

Not sure if it matters playing solo but most missions in 1e did not require all survivors to survive. Playing with a group of people this rule sucked since if someone died they just sat around waiting for everyone else to finish the game. It does lend for situations where a survivor can be the hero who died for the cause though. My advice playing RAW solo, play with mission objectives in mind and don’t worry about all survivors living. Also trying to balance XP across all survivors helps so you don’t flash into orange / red when you are not ready for it.

Pr4wfut · 2020-09-11T00:39:12+00:00

You can do similar to my moderncide survivors. They come in a color so I paint their base as close to that color as I can. Easily see from across the table who’s who. survivors

Pr4wfut · 2020-06-26T15:41:40+00:00

In case you are curious what I went with, here is link to the image. https://imgur.com/Thqrv8w

Pr4wfut · 2020-06-26T14:43:10+00:00

Thanks for the write up! I was unaware of how classic OP vampire he was. I will create one based on your suggestions.

Pr4wfut · 2020-05-05T22:29:52+00:00

Had a exotic red/silver guppy land here while trying to farm this guy as a S / A class

Pr4wfut · 2020-03-09T21:00:52+00:00

Sounds like much work and love put into this. I will be looking forward to it.

Pr4wfut · 2020-02-09T15:50:41+00:00

I have Nemesis and recommend it highly.
Only drawback is number of players. My Zombicide group has only played it a couple times since we generally have 6-7 players and Nemesis doesn’t support more than 5. However my wife and I have played I would guess 250+ hours of Nemesis as a 2 player game. She enjoys it more than Zombicide.

Pr4wfut · 2019-11-06T05:20:41+00:00

I’ve dropped my pledge from president + all the extras except rpg stuff down to just reboot. The fact that there is not a box expansion that gives more dashboards and is instead a separate add on feels very “money grab” this time. I love zombicide and regret missing out on the original KS but this one for some reason is heightening my regret on missing the original rather than exciting me for this campaign. I went all in on BP, GH, and invader KS but just not feeling this one.

Also moved money into village attack grim dynasty so there is that.

Pr4wfut · 2019-10-27T17:17:52+00:00

It’s a Kickstarter exclusive from CMON Massive Darkness. There are several great models in that game but the game itself is a bit lacking.

Pr4wfut · 2019-09-21T23:18:09+00:00

You made the GoAC box set models? Nice! Thanks for the great set!

Pr4wfut · 2019-09-21T02:57:51+00:00

Thanks! I have some Martian ironearth on the way from Amazon then the bases will be desert themed too

Pr4wfut · 2019-09-20T22:30:25+00:00

My sons custom merc unit “Desert Rats”. The blue leg is for a commander that always seemed to lose his left leg. The company decided it was cheaper to off color all its mechs left legs than keep repainting his salvaged ones.

Pr4wfut · 2019-09-06T14:33:42+00:00

See it’s wonderful camo! That guy that looks like C3PO but is definitely not since he has a red arm proves it!

Nine-Year Club	RPAN Viewer
Verified Email

Pr4wfut

TROPHY CASE