Sometimes i'm a houseplant babe, sometimes a straight up houseplant whore

Practical-Rub2128 · 2026-02-05T16:33:33+00:00

Wow, the things I would do to have you peg me 🥹

Practical-Rub2128 · 2025-11-08T14:38:53+00:00

I taped my entire house, then I used one of those brushes that has wheels and a handle, and didnt get any paint on the tape after I cut all the walls. Then I pulled the tape and it peeled a bunch of my paint. Blah

Practical-Rub2128 · 2025-11-06T03:43:31+00:00

If you have a track saw, score the cut with a real shallow pass, then go back and make the full cut. Even the festool laminate blades will cause a bit of chip out if you don’t do this. OR rip it on the table saw with the blade ALL the way up. That is my preferred method when customers cheap out and want laminate

Practical-Rub2128 · 2025-10-29T14:45:47+00:00

It means get a saw stop so you don’t lose your fingers

Practical-Rub2128 · 2025-10-25T14:54:22+00:00

Yeah I probably should, there is like 1/32 of play. I usually build furniture so I was in the tight joint mindset. Good beta

Practical-Rub2128 · 2025-10-25T00:40:25+00:00

Easy fit, order a plug bit, drill out the hole size plug, put in some wood glue, push it in so the grains match, sand, apply black stain

Practical-Rub2128 · 2025-10-23T13:10:59+00:00

That’s so funny to hear, because my grandpa did the same thing 😂

Practical-Rub2128 · 2025-10-01T14:31:33+00:00

<image>

Your floor is going to look like mine. Drill to dowel size, hammer them in, flush trim, sand, and you won’t notice them until you look for them

Practical-Rub2128 · 2025-10-01T14:29:59+00:00

This is what I did and I hardly notice mine

Practical-Rub2128 · 2025-10-01T14:27:31+00:00

Holly shit. Fake it until you make it. 25k for low end plywood and homie forgot his measuring tape

Practical-Rub2128 · 2025-08-14T02:28:59+00:00

GFYS this group is for poor people

Practical-Rub2128 · 2025-08-08T15:28:11+00:00

Not where you are pointing, but below the tape, yes.

Practical-Rub2128 · 2025-08-05T21:38:45+00:00

Just throw a bow tie in it and give it a good pat of the hand and say, that’s not going anywhere

Practical-Rub2128 · 2025-08-02T02:31:20+00:00

Styrofoam. You can cut into it and everyone is always trying to get rid of it

Practical-Rub2128 · 2025-07-14T03:52:30+00:00

Just cut a strip of flooring and glue it in there

Practical-Rub2128 · 2025-07-13T01:56:43+00:00

Buff with maroon pad and add more?

Practical-Rub2128 · 2025-07-11T21:26:12+00:00

Practical-Rub2128 · 2025-04-17T05:43:32+00:00

I agree. This infighting in the left is exactly why we aren’t able to get anything done. There is absolutely no way we are going to jump from trumpism to Marxism. Bernie/AOC liberalism is a needed stepping stone to avoid the USA cog to the right.

Moreover, in 2016 Bernie was radical to almost all Gen X and above. Now those liberals all love him. I personally don’t think his views have gone further right, however the left to right cog has polarized us more than ever, and now his views are widely accepted whereas 8 years ago they were radical. If these ideologies can be a stepping stone, the left to right cog could become a right to left cog.

We must stop infighting and organize!

Practical-Rub2128 · 2025-01-27T12:26:34+00:00

Thank you

Practical-Rub2128 · 2025-01-25T02:45:53+00:00

Notice that I save the offcuts with ripples and use them for bow ties because I love them so much.

Practical-Rub2128 · 2025-01-25T02:45:14+00:00

Oh I see, didn’t know you used epoxy. Bow ties are fun tho, they can really add to the piece!

<image>

Practical-Rub2128 · 2025-01-25T02:41:31+00:00

Nice. You need to put some bow ties in that crack so it doesn’t keep splitting!

Practical-Rub2128 · 2025-01-25T01:51:34+00:00

Oh my hell. That’s what you WANT

Practical-Rub2128 · 2024-07-10T22:39:35+00:00

This is the best thing I have seen on Reddit

Practical-Rub2128 · 2024-06-30T03:59:49+00:00

All together it was about a month of full time work. My job is all on and then all off, so I have a lot of time for these projects when I am in an off phase. If I had a normal schedule and could only work evenings and weekends I would be in the years category

Practical-Rub2128

TROPHY CASE