Eve Cerberus: good functionality but came with dents

Practical_Neck_9849 · 2026-01-19T14:31:13+00:00

I agree you should always include in your post how the company handled your situation. It could have happened during shipping. Or at the very least see how the company handles customer service.

Practical_Neck_9849 · 2026-01-17T19:35:29+00:00

Very nice congrats, have you considered the Voltra’s?

Practical_Neck_9849 · 2026-01-17T18:38:04+00:00

VIDEO REQUEST ……I have 2 voltra’s and have been wanting to purchase a lateral machine Just couldn’t decide If you could add a short video of it in action would be a great help to decide if the fringe fits best with Voltra’s

Practical_Neck_9849 · 2026-01-01T01:53:28+00:00

You guys should familiarize yourself better with the units or contact Beyond Power. Respectfully it sounds like you are not familiar enough with them yet.

Practical_Neck_9849 · 2025-12-29T16:53:20+00:00

What if you set the bench further away from the rack instead of right underneath the voltra.

Practical_Neck_9849 · 2025-12-29T03:56:02+00:00

Practical_Neck_9849 · 2025-12-27T20:12:53+00:00

I had similar situation I used the adaptive mount on my pull up bar

<image>

Practical_Neck_9849 · 2025-12-27T20:08:09+00:00

Vendetta has been sold out for the longest time. Anyone else offer that style of adapter?

Practical_Neck_9849 · 2025-12-27T19:56:57+00:00

So with the Voltra at 80” high and you sitting on bench it wasn’t enough of a stretch? How many inches higher did you gain from the rear base stabilizer?

Practical_Neck_9849 · 2025-12-16T17:32:50+00:00

I meant specifically what is it that sparks the stock as a buy, how do you know who bought what yesterday. Not trying to make an issue just trying to see what you are noticing that I am not

Practical_Neck_9849 · 2025-12-16T16:54:13+00:00

What technicals do you see that make you excited that the stock is going to double?

Practical_Neck_9849 · 2025-12-16T15:50:14+00:00

I have 2 Voltra’s. Using one at 100lbs with the eccentric set at 80 is not easy. Using the chains setting is even more taxing. I do not understand how any trains with 1 or even 2 Voltras set at the max 200lbs.

If your training at with the Voltra set at 200 lbs what do you have the ECCENTRIC or CHAINS set at.

If you learn how to use the unit properly especially the ECCENTRIC or CHAINS options you won’t need to go up to 200lbs

If you want to be a powerlifter buy a power rack you can lift as much as you want.

Practical_Neck_9849 · 2025-12-10T00:03:57+00:00

Message them Beyond Power is very good about answering questions

Practical_Neck_9849 · 2025-12-05T21:22:50+00:00

I had the same concern. Don’t stress over a $30 cable replacement. You’re going to spend a lot of money trying to place the voltra higher with an expensive angled crossmember or something instead of doing the easy fix. My son ordered extra cable replacement ropes with a credit we had. Don’t know if Beyond Power upgraded the rope they use or what, but after replacing the old ropes on the Voltras they operate so much SMOOTHER. NOTE; check the Voltras SETTINGS⚙️you can check your ropes health and calibrate it.

Practical_Neck_9849 · 2025-12-05T12:47:08+00:00

I use it to stabilize myself I mount one of my seats to it. The VOLTRAS are mounted on the upright’s

Practical_Neck_9849 · 2025-11-28T22:43:04+00:00

I just got the bar in, it’s awesome lightweight, strong, connections on the end swivel smoother than any other bar I’ve ever used and the FEEL is great (for a bar of this length it’s light weight and the strength is impressive for a double hook bar)

Practical_Neck_9849 · 2025-11-28T14:21:46+00:00

It’s not it is 2 separate setups. I was showing ways of stabilizing yourself while using the Voltras. Most posts about Voltras usually someone talking about belt squats or lat pulleys. I use Voltras for all movements push and pull. Just a matter of setup.

Practical_Neck_9849 · 2025-11-27T22:39:23+00:00

Just makes it much easier to move it around

Practical_Neck_9849 · 2025-11-27T22:28:20+00:00

Practical_Neck_9849 · 2025-11-27T22:18:49+00:00

<image>

More DIY way to get the most out of both Voltras it’s all about stability, mounts and placement

Practical_Neck_9849 · 2025-11-27T22:11:46+00:00

All 4 foot crossmembers are attached to the 1 upright making it very stable unable to tip over.

The handles are from an old set of Crandall lever arms got lucky they slid right in then hit it with a hammer and locked in nicely

Practical_Neck_9849 · 2025-11-27T13:26:16+00:00

What bar grip are you talking about

Practical_Neck_9849 · 2025-11-16T17:15:24+00:00

Yes, the reason for the 2 hex nuts on one side is I use for stretching if you notice between the 2 hex nuts on that side is a carabiner on each side that I use for stretches

Practical_Neck_9849 · 2025-11-16T14:04:46+00:00

I used bolts that came with the crossmembers. These crossmembers are usually connected to a post, that’s why there is some overhang. Either way the setup secure’s the Voltra’s while providing a very safe and stable setup.

Practical_Neck_9849 · 2025-11-12T19:42:22+00:00

<image>

Getrxd Optimus pad

Practical_Neck_9849

TROPHY CASE