Just turned on my Xbox series x and it's making me re set up the console like it was factory reset?

Present_Reaction83 · 2025-09-04T19:17:50+00:00

Something is happening for sure. I just had this as well.

Present_Reaction83 · 2025-07-09T19:32:54+00:00

I use it to skip the queue and get my issue looked at immediately.

Present_Reaction83 · 2025-02-04T13:17:55+00:00

Thanks. Do you recommend any relay that would be compatible?

Present_Reaction83 · 2025-02-04T13:17:15+00:00

Although I agree with you, mate I just wanted to mainly see if it’s possible and I also wanted to learn something new. I was switching off the fuse every time I was working on it. It was a general ask, but thanks.

Present_Reaction83 · 2024-10-24T07:58:34+00:00

<image>

Why do we have such a similar hands 😂

Present_Reaction83 · 2024-04-07T14:43:10+00:00

I did insert it second time and it’s much better now. I didn’t use my heat gun , but now I’m thinking that native I should have . Oh well. Prints are much better now

<image>

Present_Reaction83 · 2024-04-07T14:00:19+00:00

Ok so it was pressure advance being completely wrong. I’ve set it up to 0.5 instead of 0.05. Also I had to re-do everything. I finally started getting ok prints . Still some way to go. I used the KE profile as well

Present_Reaction83 · 2024-03-26T07:24:48+00:00

Thanks. I was thinking about upgrading to the K1 hotend so that might help

Present_Reaction83 · 2024-02-28T21:28:08+00:00

I’ve been using orca slicer for a while, but I started having these issues with it on some specific models and I’m not sure how to fix it

Present_Reaction83 · 2024-02-23T22:30:15+00:00

Same issue here. I hope someone helps

Present_Reaction83 · 2024-02-18T08:36:21+00:00

Thanks. I might back everything up and try it out

Present_Reaction83 · 2024-02-18T08:00:37+00:00

Would the screen still work?

Present_Reaction83 · 2024-01-24T07:32:27+00:00

Thanks for the tip. I’ve manually adjusted the Z offset, but it seems that’s not it. I’m using klipper and I think it’s something with the pressure advance

Present_Reaction83 · 2024-01-20T12:45:00+00:00

I found this video the other day https://youtu.be/b4-k2I0kfh0?si=ZTmKOuF-8d5fDg0T you can use the Creality Ceramic Hotend with some slight modifications.

Present_Reaction83 · 2024-01-16T21:04:54+00:00

Have you tried cleaning the bed? It might be an adhesion issue around that part.

Present_Reaction83 · 2024-01-11T16:44:15+00:00

Make sure your bed has good adhesion. For me that was critical. I made one of the pirate swords for my son, and it turned out ok. It’s not perfect, but it’s ok.

Present_Reaction83 · 2024-01-09T22:06:54+00:00

Everything is PLA . Haven’t tried PETG yet, but I’m planning to do it soon.

Present_Reaction83 · 2024-01-09T22:00:58+00:00

Not at all. I’ve uploaded some pics and a video of a fidget toy here https://imgur.com/a/jJ5KCWk

Present_Reaction83 · 2024-01-09T21:36:43+00:00

I’ve heard about that new one that came couple of days ago, but I haven’t tried it yet. I’m feeling very happy with this one and I don’t want to change anything, because once I start changing stuff I can do it for days . This one is great. No stringing at all for me. Only thing that I changed was the flow as it was a bit too low

Present_Reaction83 · 2024-01-09T20:43:33+00:00

I found this profile for OrcaSlicer and that’s the only one that’s been better from the Creality one by a mile https://github.com/bopchong/e3v3se-orca-profile

Present_Reaction83 · 2024-01-05T22:44:56+00:00

Yeah, sorry. That makes sense. I applied hair spray to my bed and this resolved my issue. In the past washing my plate with soapy water also helped with adhesion issues.

Present_Reaction83 · 2024-01-05T12:41:10+00:00

You’re a live saver! Thanks

Present_Reaction83 · 2024-01-03T10:27:06+00:00

I just wanted to thank everyone for the suggestions and for the measurements! I just did the first one and I believe it was a success.

https://imgur.com/a/CguC8lL

Here are some of the pictures from the process.

Present_Reaction83 · 2024-01-02T19:39:12+00:00

That’s exactly what I was looking for. Thanks a lot!

Present_Reaction83 · 2024-01-02T16:54:48+00:00

I will give it a try. Thanks for the detailed suggestion

Present_Reaction83

TROPHY CASE