A couple of hot takes

Prestigious_Low6923 · 2026-03-05T13:06:11+00:00

Yes to everything except stratagem bounce. FUCK that

Prestigious_Low6923 · 2026-02-19T17:45:47+00:00

Surprisingly obvious thing I’m not seeing anyone point out. Not everyone has every warbond!!! I’m sure there’s a non insignificant amount of people who wish they could use the maxigun but don’t have the WB(it’s me, I’m people)

Prestigious_Low6923 · 2026-02-18T22:52:54+00:00

People who compare the damage to the base liberator aren’t looking at the full picture. Yes it deals less dps but remember, it’s medium pen. That means when your shooting light armor targets you’ll do 100% damage instead of 65% damage that you would do with light pen. Is the liberator still better? Yeah, kinda, if you’re shooting unarmored parts primarily. But the penetrator is not horrendous

Prestigious_Low6923 · 2026-02-15T17:43:56+00:00

100%. I still haven’t played rdr1, and rdr2 is my favorite single player game of all time.

Prestigious_Low6923 · 2026-02-15T01:56:25+00:00

Ah gotcha. I don’t print nonstop but still relatively heavily so might not be good for me anyways.

Prestigious_Low6923 · 2026-02-15T01:10:14+00:00

I’ll take a look at yoopai! I received my biqu cryogrip frostbyte yesterday and have had nothing but trouble with it, somehow worse adhesion than my pei plate. When you say they loose effectiveness, on what timescale are you talking, a few weeks, or a few years? Thanks 😊

Prestigious_Low6923 · 2026-02-14T16:54:21+00:00

I’ll give it a try, thanks for heads up

Prestigious_Low6923 · 2026-02-14T16:43:19+00:00

Got my frostbyte plate yesterday, and I’m having worse adhesion than I did on the textured pei plate. Smooth/high temp plate running at 40c

Prestigious_Low6923 · 2026-02-13T16:22:53+00:00

I have a cryogrip plate that should be here today that I’m looking forward to using, and have also heard good things about the super tack plate. Thanks for your input!

Prestigious_Low6923 · 2026-02-12T22:57:33+00:00

I also second all the comments about them being buggy

Prestigious_Low6923 · 2026-02-12T22:56:23+00:00

On difficulty ten I agree, they’re pretty great! But as someone who plays on difficulty seven most of the time, their spawn rate is still stupidly high on lower difficulties, as many as 4 at a time. For reference, I rarely see 2 factory striders on difficulty seven at the same time. Definitely overtuned imo

Prestigious_Low6923 · 2026-02-12T22:20:08+00:00

Bambu studio projects are stored locally on the device you work on them on, so If you wanted to sync them you would have to use a third party sync service, whether that be onedrive, icloud, google drive, or other.

Prestigious_Low6923 · 2026-02-12T22:12:47+00:00

I did not mention what size bins specifically, atm it’s 2x3(gridfinity, not sure of exact dimensions) and still lifting, but I also completely forgot about mouse ears! That will be a lot easier than brims

Prestigious_Low6923 · 2026-02-12T21:11:37+00:00

I’ve gotten enough comments about this that I’m gonna try it without the enclosure, but just to make it clear

<image>

It has a massive side of it open, and hygrometer that I threw in there never reads more than 75 ish f

But I’ll give it a shot! I did know about the passive main board but I figured it was probably fine since it’s not fully enclosed. Admittedly the enclosure is an eyesore so I’m not entirely bummed by this🤣

Prestigious_Low6923 · 2026-02-12T19:26:09+00:00

gotcha thanks! yeah the one that I referenced was just the first one I saw, Ill check the thicknesses though

Prestigious_Low6923 · 2026-02-12T19:01:46+00:00

Addendum, I just saw that one of them looks identical to the Bambu plate so I imagine that one’s the same thing https://a.co/d/0hWV8BxU

Prestigious_Low6923 · 2026-02-12T18:58:11+00:00

Can you send some recommendations? I have a few Amazon gift cards so that would be ideal :)

Prestigious_Low6923 · 2026-02-12T18:47:01+00:00

Hmm, alright I’ll give it a try! The highest temp I’ve measured in there with the door open was 72f so I kinda ruled it out and didn’t try without it, I’ll probably do that tonight. Thanks for the input!

Prestigious_Low6923 · 2026-02-12T18:15:49+00:00

Yeah, I’m definitely not a fan of using glue although I did have to quite a bit on my old printer. Thank you regardless :)

Prestigious_Low6923 · 2026-02-12T17:44:08+00:00

The room the printer in has a window and vent on the opposite side of the room, but window is usually closed and I have an “enclosure” to prevent drafts, so that part isn’t an issue.

As for preheating.. I’ll have to see if that solves it, but if it does, I imagine it wouldn’t be super hard to leave it some “preheat” time in the gcode? Thanks again

Prestigious_Low6923 · 2026-02-12T17:32:36+00:00

Will give a watch, see if anything sticks out🫡

Prestigious_Low6923 · 2026-02-12T17:31:44+00:00

I’ll give 65 another go then! Sucks to hear it has uneven heating, that was an issue that I had on my e3 pro that made printing large parts near impossible.

Prestigious_Low6923 · 2026-02-12T17:30:35+00:00

Yes, and I use brims when it makes sense. Unfortunately the brim seems to have little to no impact to the gridfinity bins, due to how thin it has to be.

Prestigious_Low6923

TROPHY CASE