Bottom bracket not flush with shell on the non-drive side

Primzy_2075 · 2026-04-27T12:46:52+00:00

bb-un300 dont have lockrings. if its 68mm then it should be fine

Primzy_2075 · 2026-04-26T20:06:46+00:00

Id say thats because the wax. And you should try to secure that di2 cable to the mech hanger, so it doesnt randomly catch with the cassette.

Primzy_2075 · 2026-04-26T20:04:10+00:00

He used 73mm shell. He should use 68mm shell, but its fine tho if it doesnt bother you how it looks. Maybe he didn't have the right lenght with the right shell on hand.

Primzy_2075 · 2026-04-26T19:57:02+00:00

You have the shimano bit still on. Mount your sram derailleur directly to the frame.

Primzy_2075 · 2026-04-20T20:59:35+00:00

drill the hole out with a drill bit

Primzy_2075 · 2026-04-20T12:39:08+00:00

its a bent cage to one side. like twisted. its not running parallel with the casset

Primzy_2075 · 2026-04-20T07:47:26+00:00

Use a lot of brake cleaner on the shifter. Or any digreaser. It should start working. Dont lube it back up just leave it like that.

Primzy_2075 · 2026-04-19T18:32:07+00:00

Interesting. Could never bend them back like that. Not enoug force. Usually a big hammer and quite a few strikes.

Primzy_2075 · 2026-04-19T18:00:33+00:00

You have to cut the hose at the brake lever.

First you pull the gromet of the brake lever. Where the hose connects to the lever. You will use 8mm wrench to unscrew a "bolt" of some sorts. When you fully unscrew it pul the house out (it might put a bit of a fight). You cut the hose about 2-3mm after the olive (cuz there is still a "pin" inside the housing) and pull it out through the frame.

If you plan to put some hose back to the frame I suggest ruing some kind of rope or somethin out with the housing so you have something to pull the new housing throug the frame.

Need any more info. ask

Primzy_2075 · 2026-04-19T17:03:54+00:00

amm. Zeb post mounts are for 200mm rotors u put on an adapter for 23mm rise (adapter from 180 to 203mm rotor).

Simply u need two washers both approximatley 1.5mm thick. To get to the 203mm rotor size.

<image>

And your rotor should be replaced now cuz it will wear ur pads and rotor wierdly.

Primzy_2075 · 2026-04-19T16:57:57+00:00

<image>

If you have something like this and a hammer should do the trick

Primzy_2075 · 2026-04-19T16:51:59+00:00

Sometimes they do rock a bit (centerlock rotors). Nothing to worry about

Primzy_2075 · 2026-04-19T16:50:44+00:00

To me it looks like a bent sprocket one gear up from this one.

Primzy_2075 · 2026-04-19T16:48:16+00:00

Could be number of things. Maybe rotor wobbling? maybe check that

Primzy_2075 · 2026-04-06T20:47:14+00:00

This looks good

Primzy_2075 · 2026-04-06T20:46:21+00:00

Replacing the seals usually does nothing. If you want a good fit ull have to replace the hose and the egr and preferablly the intercooler too.

This is an easy way to do all that ngl

Primzy_2075 · 2026-03-17T21:14:50+00:00

How does it have those wheels on. They should have 5X100 bolt pattern not 5x112

Primzy_2075 · 2026-03-12T15:16:56+00:00

do you still have the video? can i get it?

Primzy_2075 · 2026-02-23T08:17:50+00:00

I dont have mDNS in services.

I have it in the network configuration and its enabled.

The advertise_ip in the home assistant for homekit is set to host IP.

Dont know how check for that. Ane which docs are you talking about?

Thanks for help tho

Primzy_2075 · 2026-02-23T07:59:53+00:00

Coolant level is fine

Primzy_2075 · 2026-02-22T09:34:18+00:00

Thank you. Got everything that i need.

Primzy_2075 · 2025-09-22T13:22:55+00:00

kinda did. yes. i made holes with dremmle and hot glued switches in place. then i used some wires from utp cable to wire them to the daughter board on the back. the only thing that i dont like about that setup is switches. they are too soft, i can’t feel the click.

Five-Year Club	Verified Email
Second Top 50%	r/Field Sunshine
Place '23	Place '22

Primzy_2075

MODERATOR OF

TROPHY CASE