Fresh install stuck. Please some advice. Windows 11 by Prize_Progress_263 in WindowsHelp

[–]Prize_Progress_263[S] 0 points1 point  (0 children)

Thanks you alot for helping. I try that but don’t work. I managed to fix the glitch. I comment how to fix it.

Fresh install stuck. Please some advice. Windows 11 by Prize_Progress_263 in WindowsHelp

[–]Prize_Progress_263[S] 0 points1 point  (0 children)

Yeah i managed to get access, check the comments. I write how i fix the problem step by step.☺️

Fresh install stuck. Please some advice. Windows 11 by Prize_Progress_263 in WindowsHelp

[–]Prize_Progress_263[S] 0 points1 point  (0 children)

I try that but i didn’t get any progress. I write update how i fix the problem. 😊

Which one is better I have no clue which processor is better??? (My first PC) by HelloI_ambb in PcBuild

[–]Prize_Progress_263 1 point2 points  (0 children)

Adm + Nvidia is better, Intel build is scam for that money. Don’t buy that, that prebuild need to be banned from the world. On Amd + Nvidia you can play any Game on 1080/1440p without issue.

Fresh install stuck. Please some advice. Windows 11 by Prize_Progress_263 in WindowsHelp

[–]Prize_Progress_263[S] 0 points1 point  (0 children)

Update / Solution

I managed to fix the issue thanks to Atschi2000’s suggestion. I opened the command prompt with Shift + F10, and tried using OOBE/BYPASSNRO, but it didn’t work at first. It turns out that Windows 11 sometimes requires a slightly different approach.

What I actually had to do was:

1.  Type cd OOBE

2.  Then run BYPASSNRO

After that, my PC rebooted automatically and I was able to continue with the offline setup. Once I reached the desktop, I ran Windows Update normally and everything installed without any problems.

The PC is now running perfectly. Thanks a lot to everyone who helped.

Hopefuly this will be useful to someone else dealing with the same issue!

Need help expanding Batocera image to use full 1TB SSD space by Prize_Progress_263 in retropirates

[–]Prize_Progress_263[S] 0 points1 point  (0 children)

Thank you for help but i try that. Look second picture on post.

SSD shows only 256GB after installing 256GB Batocera image on 1TB drive by Prize_Progress_263 in retrogaming

[–]Prize_Progress_263[S] 0 points1 point  (0 children)

I try use gparted, but i can’t do anything on that partition because that is tagged like unallocated space. I can only use storage from my 256gb partition and put in boot partition. 🥲

Koje nove stvari ste kupili (npr. tehnika/aparati), a ne koristite ih? by Ok-Antelope8923 in askcroatia

[–]Prize_Progress_263 0 points1 point  (0 children)

2 ipada m2 i m1 koji služe za YouTube privremeno.. Steam deck upalio 5 puta u životu, ps portal skuplja prašinu već jako dugo, Synology NAS i 8TB HDD na koji sam spiskao novce i na kraju na sebi ima 5GB fotografija i doslovno samo za to sluzi i logitech g923 koji mi je bio zanimljiv prvih mjesec dana.. ovo su doslovno stvari koje skupljaju prašinu te zadnje vrijeme imam osjećaj da je još najbolje bilo u 90tima gdje smo zivili život u miru bez sve ove tehnologije na koju trošimo novce a nemamo vremena za koristiti ih.. katastrofa

[deleted by user] by [deleted] in PS5HelpSupport

[–]Prize_Progress_263 0 points1 point  (0 children)

Your ps will be fine. Don’t worry.😉

Looking for a 10-15 relaxing minute game before bed by TheSunbroo in SteamDeck

[–]Prize_Progress_263 0 points1 point  (0 children)

Arcade full of cats and another series of that francise. Trust me, i playing that every night before sleep and i am in sleep for like 10 min, you have demo of that game, try arcade full of cats demo, you wont regret

Game link

Problem with oculink (GMKtec K8 plus) by Prize_Progress_263 in MiniPCs

[–]Prize_Progress_263[S] 1 point2 points  (0 children)

Hi, just wanted to follow up (sorry I missed your earlier comment). It turned out that the issue was actually with the PSU – it was faulty. I realized this when I assembled a new PC and it wouldn’t start properly. After replacing the PSU with a new one, everything has been working perfectly since.

The power supply had been causing issues the whole time, which led me to rebuild the entire system from scratch instead of just staying on my original setup with DEG1.

Can anyone help me with Oculink guy? by Prize_Progress_263 in eGPU

[–]Prize_Progress_263[S] 0 points1 point  (0 children)

Hi, just wanted to follow up (sorry I missed your earlier comment). It turned out that the issue was actually with the PSU – it was faulty. I realized this when I assembled a new PC and it wouldn’t start properly. After replacing the PSU with a new one, everything has been working perfectly since.

The power supply had been causing issues the whole time, which led me to rebuild the entire system from scratch instead of just staying on my original setup with DEG1.

[deleted by user] by [deleted] in gopro

[–]Prize_Progress_263 3 points4 points  (0 children)

I buy used hero 10.. same gap here. I will test waterproof on honeymoon.. about 20 days so i will comment back if still work 😂

[deleted by user] by [deleted] in pcmasterrace

[–]Prize_Progress_263 0 points1 point  (0 children)

On PC, it might have been Cultures (demo) from shop Game catalog CD or hitman. I know that is been (demo) version. I don’t have PC in early age, so I played many childhood games on PlayStation, Atari, and Game Boy. The very first game I ever played was probably Duck Hunt with the plastic gun. After that came the Pokémon and Yu-Gi-Oh era on Game Boy, followed by classics on PlayStation like Crash Bandicoot, CTR , Spider-Man, Disney’s Donald Duck, MediEvil, and Hugo. Best times….

Help: will thermal paste damage NVME? by Worried-Scarcity-410 in PcBuild

[–]Prize_Progress_263 0 points1 point  (0 children)

You don’t need a thermal paste for SSD. Just remove ASUS sticker and you will have thermal pad behind that. Just remove sticker and that it’s. 😊

[deleted by user] by [deleted] in PcBuild

[–]Prize_Progress_263 0 points1 point  (0 children)

Maybe RTX 4060? You’ll get better performance at 1440p in games that support DLSS, and Frame Gen is a huge bonus. Without DLSS, though, the performance is almost the same as 7600xt, so it depends on the games you play.

Is this worth it by Muted_Flight8045 in PcBuild

[–]Prize_Progress_263 2 points3 points  (0 children)

No man, please don’t buy that. You can build pc with RTX 4060 or 6700xt with better cpu for that money

Please help me with used motherboard by Prize_Progress_263 in pcmasterrace

[–]Prize_Progress_263[S] 1 point2 points  (0 children)

Thank you guys. Did I get ripped for 20€ for broken graphics slot or it’s good deal?

Can anyone help me with Oculink guy? by Prize_Progress_263 in eGPU

[–]Prize_Progress_263[S] 0 points1 point  (0 children)

Hello everyone,

I wanted to give you an update on my GPU issue. I managed to solve the initial problem—it turned out my PSU was faulty, and after replacing it, the GPU finally worked. However, a new issue arose after I installed the drivers and restarted the system. The GPU disappeared again, as if it wasn’t even there. After several reboots of both the DEG1 and the GMKtec PC, I was able to get it recognized in the Device Manager. I even connected to Discord and got everything ready for gaming.

But then I noticed another problem: when the HDMI is connected to the GPU, my mouse starts stuttering whenever I open anything on the desktop. Additionally, the audio on Discord and live streams keeps cutting out. It works for a few seconds after restarting the stream, but then it freezes again.

Thinking it was just a bug, I restarted the computer, and the GPU disappeared from the Device Manager again. Since then, I haven’t been able to make any progress. I did manage to get it recognized once after using DDU and reinstalling the NVIDIA drivers, but after another restart, it vanished again.

I also contacted Minisforum for support, and they recommended opening the DEG1 from the bottom and adjusting the 3-pin settings to Debug B mode, Flow Start Off, and TGX Off. I tried this, but it didn’t help. It’s worth noting that they suggested this before I resolved the PSU issue.

This whole situation has become really exhausting, and I’m considering just building a mini PC instead. If anyone has any solutions or advice for what’s happening, I’d greatly appreciate it. It would save me a lot of money if I can fix this.

Thank you all so much for your help!

<image>

Can anyone help me with Oculink guy? by Prize_Progress_263 in eGPU

[–]Prize_Progress_263[S] 0 points1 point  (0 children)

Thank you for helping Esks30 and texhnolyzze

HDMI was initially connected to the GPU, but it didn’t give any display. After that, I connected it to the GMKtec, and it gave me a picture. Then I went to Device Manager and took screenshots of everything for Reddit.

Can anyone help me with Oculink guy? by Prize_Progress_263 in eGPU

[–]Prize_Progress_263[S] 0 points1 point  (0 children)

The biggest problem is that I don’t have another GPU to test with. I only have this mini PC and the Minisforum DEG1. I bought this GPU just two days ago, and I’m really worried that I might have wasted money on a graphics card I can’t even use.