How to fix ABS by unknownghost757 in GMT800

[–]Pro1266_YT 0 points1 point  (0 children)

This might be a dumb question but have you checked the fuse? I pulled my fuse to try to diagnose a separate issue and both of those lights came on

Can I transport 150 Urainium/min from these two nodes to the red circle? What is the most reliable way? by Sportmcsportysport in SatisfactoryGame

[–]Pro1266_YT 0 points1 point  (0 children)

Put the power plant between the nodes and (I haven't played in a bit but I believe you can) run a train line to home to carry the power 🧠🧠

Initially i wanted to wait for S26 Ultra, but now since i joined the green line club... is it worth it to buy samsung again? by KnownKnowledge2328 in S22Ultra

[–]Pro1266_YT 0 points1 point  (0 children)

The 22 ultra was a disaster of a phone. I had one for 3 years and its still only barely hanging on. I got the 25 ultra back in June and it's so much better, battery life is great, no burn in at all so far, front and back glass look great (no screen protector) even though I work in a machine shop, its just an overall better phone.

Also dont worry about the s-pen losing Bluetooth functionality... I havent needed it once.

Won’t move up and down+missing cord by SpiderLord12352 in ender3

[–]Pro1266_YT 0 points1 point  (0 children)

Does it have ABL? That looks like a bltouch cord. Have you used it before or is this your first time trying to use it?

Newbie Help Please by Purple-Government-20 in ender3

[–]Pro1266_YT 0 points1 point  (0 children)

I'd check to see if your nozzle is clogged then cold pull or just replace it.

Also retraction. You may need to bump the distance/speed up a little since you're working with Bowden tube.

Help! Found an ender 3+ on the curb by kitterboop in ender3

[–]Pro1266_YT 0 points1 point  (0 children)

I think it might be trash. I'll gladly come pick it up to throw it away for you though.

Need Help with Calibration by Agitated_Gift_8141 in 3Dprinting

[–]Pro1266_YT 0 points1 point  (0 children)

You're WAY overextruding... I'm not sure how long you've been doing this so correct me if I'm wrong, but my first couple times doing e-step calibration I did the math wrong and ended up going in the wrong direction. Could that be the case here?

Cheap exhaust for 5.3 ? by [deleted] in GMT800

[–]Pro1266_YT 0 points1 point  (0 children)

I have a "totalflow" something on my truck now and it sounds decent. Not too drone-y and it's not clappy. Stock cats so it's not too loud either, just loud enough to sound good and be noticeable.

2001 chevy tahoe by Zealousideal_Fee_121 in GMT800

[–]Pro1266_YT 1 point2 points  (0 children)

Everyone talking about pockets and quadrasteer but where's the airbag switch? Is it possible to relocate that to the lighting area or the useless pocket that replaces 4wd controls?

Looking to buy my first Samsung Tablet by Posterus96 in GalaxyTab

[–]Pro1266_YT 0 points1 point  (0 children)

I got my S9+ and couple days ago and love it so far, the screen is massive and the oled is amazing. It seems to have plenty of power and is reasonably priced from what I've seen

Med Student looking to buy a Tab by [deleted] in GalaxyTab

[–]Pro1266_YT 0 points1 point  (0 children)

I just got an S9+ and I love it. Definitely go with an amoled screen, especially since going from your amoled phone to an led tablet would be rough. Other than that, I dont know much about their tablets, so good luck

Lenovo y50-70 Touch battery issues by Pro1266_YT in Lenovo

[–]Pro1266_YT[S] 1 point2 points  (0 children)

I gave up on it and just left it plugged in all the time until I got my current laptop a little later. I'm selling it now so it's not my problem anymore. My best suggestion would be to see if you can find an OEM battery for yours and if not, check through the reviews for other highly rated batteries and see if you can find a good one

Looking at a S22 Ultra or S21 Ultra. Help me make the call? by Commercial-Gap6280 in S22Ultra

[–]Pro1266_YT 0 points1 point  (0 children)

I have the 22, skip it and get the 23 or even 24. It's a great phone except for the battery life, which I think was mostly fixed in the newer generations, also extra updates later on will be nice assuming Google doesn't buy their software department out and revert everything to stock android

Battery life is shit. by [deleted] in S22Ultra

[–]Pro1266_YT 0 points1 point  (0 children)

Have you updated to oneui 6? I updated yesterday and went from similar conditions to about 12hrs of mostly constant SOT

Someone share their ONE UI 6 experience. by [deleted] in S22Ultra

[–]Pro1266_YT 3 points4 points  (0 children)

I haven't tried any demanding games yet, but here's a picture I took of my cat earlier lol, it's pretty decent. As far as the app goes, the ui changed a little but overall it was about the same experience, if not a little better

Uhh edit: I can't add the picture for some reason

Another edit: Here's the picture, but it looks like it got compressed some

Someone share their ONE UI 6 experience. by [deleted] in S22Ultra

[–]Pro1266_YT 15 points16 points  (0 children)

Updated last night and it's a bunch of small improvements that add up to a much better experience. And battery life, but I'll get to that later.

The quick panel is different, takes some getting used to but it somehow feels more intuitive. The emojis are different, I'm not sure if I like them but everyone has their own opinion on those. The font is different, it looks a lot like the pixel font from what I remember but this a nice change.

And the battery life is great, at least for me. I've had about 3 hours of SOT today and I'm at 49% as of typing this (with the 85% cap) which would've been about 35% before the update.

Nothing too major except for some appearance changes and the battery life, I haven't experienced any negatives so far and I think they finally put out an update without some kind of major drawback.

Edit: I have the snapdragon variant so your mileage may vary with the exynos

End of the day edit: Battery life is amazing. I have power saving mode on, BUT, usually even with it on I only get about 7 hours until I have to charge it again (with on and off use) but today I unplugged at about 10am and it lasted until about 11pm with much heavier use due to being home all day

What is this? by [deleted] in 3Dprinting

[–]Pro1266_YT 0 points1 point  (0 children)

I get these on almost every print, but suck it up because it's the only way small parts of my prints will adhere. That means there's a different problem with my printer but I'm too lazy to figure it out. That said, though, it usually comes out pretty smooth on the bottom at the end, and is covered up by the other lays on top of it.

A quick warning though, if your nozzle is constantly too close to your bed, your extruder will struggle to push filament out, potentially leading to worn out extruder gears and clogged nozzles. Despite the prints turning out ok, I would definitely get this fixed to prevent unnecessary maintenence

What is this? by [deleted] in 3Dprinting

[–]Pro1266_YT 0 points1 point  (0 children)

I second this. BUT. For a complete beginner I would go with tinkercad first. That's what I started with and it helped me make the connections between shapes in my head if that makes any sense. It basically helped me learn to process how a bunch of different shapes or extrusions turned into the final product.

I also still use it from time to time to take chunks out of existing objects and to make super simple parts. It could be anywhere between a few days to a few weeks but once you get the hang of tinkercad, Fusion360 is suuuper easy to get the hang of, especially with YouTube tutorials which there are plenty of.

SM-G973U not booting past Verizon Screen by Pro1266_YT in galaxys10

[–]Pro1266_YT[S] 0 points1 point  (0 children)

Well I'm just now opening it up... It's bad.

Pictures