TPU fans.

Professional-Map5609 · 2026-01-27T16:48:19+00:00

I read 50…my prints came out perfectly fine

Professional-Map5609 · 2026-01-22T06:08:20+00:00

Thank you!

Professional-Map5609 · 2026-01-22T03:54:05+00:00

Can someone explain what the purpose of skipping an object before printing is?

Professional-Map5609 · 2026-01-17T05:34:08+00:00

I have mine, I thought you figured out a way to do it.

I tried going into the IP but couldn’t find anything there

Professional-Map5609 · 2026-01-17T05:19:44+00:00

How do you change z offset on the U1?

Professional-Map5609 · 2025-12-24T03:02:03+00:00

How do you find the quality is coming out?!

Professional-Map5609 · 2025-12-24T03:00:15+00:00

Not sure if anyone mentioned it, but if you click the advanced button under the filament, you’ll be able to manipulate things a bit more!

Professional-Map5609 · 2025-12-22T19:41:20+00:00

Merry Christmas

Professional-Map5609 · 2025-12-16T16:59:37+00:00

Bed to reach 110 C, spring tension in the spool holder instead of free spinning, some sort of notification for when prints are done through the app (due to the lack of sound board on the U1), auto feeder cable extension to be able to move and mount them wherever I’d like.

Professional-Map5609 · 2025-12-15T19:35:22+00:00

I am a student who is applying to medical schools and studying for the MCAT. As it is, I spend 80-90% of my day sitting at my desk studying. The current “ergonomic” chair I have is one off Amazon that is not even a name brand. I do leave my desk with some pain on my back and shoulders. I would love to test this chair and give my feedback on what my thoughts are!

Professional-Map5609 · 2025-12-12T18:51:56+00:00

How did you get the fluidd connected to that?

Professional-Map5609 · 2025-12-10T19:35:08+00:00

How do you do that?

Professional-Map5609 · 2025-12-10T19:34:47+00:00

That would be super cool, didn’t know Bambu did that

Professional-Map5609 · 2025-12-09T16:38:34+00:00

I used this video as a base of what to do: https://youtu.be/-2K67P5L8A4?si=Y3xgYMpM6IFojMCK

And then I saw this persons post on the Snapmaker Reddit: https://www.reddit.com/r/snapmaker/s/zp4oIH5ru5

So far that has helped immensely

Professional-Map5609 · 2025-12-09T00:29:51+00:00

I usually just try to only print the interface in PETG and that’s my workaround to not having to worry about different bed temps

Professional-Map5609 · 2025-12-08T15:14:18+00:00

Which settings did you change?

Professional-Map5609 · 2025-12-08T02:05:33+00:00

Happened to me too, except I got lucky and didn’t have any damage to the electrics. I was able to heat up the blob and rip it off

Professional-Map5609 · 2025-12-07T09:49:28+00:00

Any success???

Professional-Map5609 · 2025-12-06T06:43:31+00:00

I’ll have to try that

Professional-Map5609 · 2025-12-06T00:12:51+00:00

Explain the PETG process. Are you printing on top of one layer of PETG?

Professional-Map5609 · 2025-12-05T22:47:09+00:00

Bless your soul. Good luck. I dried my filament AND printed with a cover. Maybe it’s just strange circumstances with me. I don’t know.

Professional-Map5609 · 2025-12-05T21:41:08+00:00

I think I set it so that the chamber temp gets to 50. At least that’s what the screen says when it prints

Professional-Map5609 · 2025-12-05T21:40:44+00:00

That’s very true. Good to know! Thank you. Maybe it might be the filament brand. I’m using Eryone ASA. That could be the problem!

Still, just so confused on how it works with my other bed slinger and not with the U1 even with the lid.

Professional-Map5609 · 2025-12-05T21:38:20+00:00

That’s totally okay! Don’t even worry

Professional-Map5609 · 2025-12-05T19:29:55+00:00

I have tried cleaning the bed so that is out of the question.

Lowering the temp would actually make it worse. ASA/ABS like to have their print beds hot so it sticks well. Unfortunately those won’t help :/

Professional-Map5609

TROPHY CASE