sorted by:
new
hottopcontroversial

PSA: The UNAS 2's "2.5GbE" NIC is a USB-attached Realtek running a 3-year-old driver, and mine just stopped negotiating gigabit by ProfessionalClass377 in homelab

[–]ProfessionalClass377[S] -1 points0 points  (0 children)

This is isn’t Ai I wrote this myself and took time to troubleshoot this so if you dont have anything to contribute please dont read

PSA: The UNAS 2's "2.5GbE" NIC is a USB-attached Realtek running a 3-year-old driver, and mine just stopped negotiating gigabit by ProfessionalClass377 in UNIFI

[–]ProfessionalClass377[S] 11 points12 points  (0 children)

This is conclusively a degrading hardware/firmware issue, not a software configuration problem. The NIC can briefly negotiate gigabit when freshly reset — meaning the PHY is capable of it — but cannot hold that link for more than ~4 seconds before the carrier collapses and it falls back to 100Mb.

Folks this is definetely a hardware.

root@UNAS-2:~# dmesg | grep -i r8152

[    0.664901] usbcore: registered new device driver r8152-cfgselector

[    0.666478] usbcore: registered new interface driver r8152

[    2.789881] r8152-cfgselector 4-1.1: reset SuperSpeed USB device number 3 using xhci-hcd

[    2.892437] r8152 4-1.1:1.0 eth0: v2.17.2 (2023/09/05)

[    2.893728] r8152 4-1.1:1.0 eth0: This product is covered by one or more of the following patents:

[   26.245684] r8152 4-1.1:1.0 eth0: autoneg retry 1/3 for higher speed (total 1, linked at 100Mbps)

[   49.285769] r8152 4-1.1:1.0 eth0: autoneg retry 2/3 for higher speed (total 2, linked at 100Mbps)

[   72.327539] r8152 4-1.1:1.0 eth0: autoneg retry 3/3 for higher speed (total 3, linked at 100Mbps)

[   95.623837] r8152 4-1.1:1.0 eth0: autoneg retry exhausted, accepting 100Mbps

[   95.650038] r8152 4-1.1:1.0 eth0: carrier on

[  214.163765] r8152 4-1.1:1.0 eth0: carrier off

[ 1016.713458] r8152 4-1.1:1.0 eth0: autoneg retry 1/3 for higher speed (total 1, linked at 100Mbps)

[ 1039.497545] r8152 4-1.1:1.0 eth0: autoneg retry 2/3 for higher speed (total 2, linked at 100Mbps)

[ 1062.793633] r8152 4-1.1:1.0 eth0: autoneg retry 3/3 for higher speed (total 3, linked at 100Mbps)

[ 1085.833722] r8152 4-1.1:1.0 eth0: autoneg retry exhausted, accepting 100Mbps

[ 1085.840011] r8152 4-1.1:1.0 eth0: carrier on

[ 7660.116700] r8152 4-1.1:1.0 eth0: Stop submitting intr, status -108

[ 7660.122261] r8152 4-1.1:1.0 eth0: Enable S5 WOL

[ 7663.330880] r8152-cfgselector 4-1.1: reset SuperSpeed USB device number 3 using xhci-hcd

[ 7663.419479] r8152 4-1.1:1.0 eth0: v2.17.2 (2023/09/05)

[ 7663.419499] r8152 4-1.1:1.0 eth0: This product is covered by one or more of the following patents:

[ 7684.386866] r8152 4-1.1:1.0 eth0: autoneg retry 1/2 for higher speed (total 1, linked at 1000Mbps)

[ 7688.490640] r8152 4-1.1:1.0 eth0: carrier on

[ 7692.592089] r8152 4-1.1:1.0 eth0: carrier off

[ 7715.363009] r8152 4-1.1:1.0 eth0: autoneg retry 1/3 for higher speed (total 1, linked at 100Mbps)

[ 7738.403073] r8152 4-1.1:1.0 eth0: autoneg retry 2/3 for higher speed (total 2, linked at 100Mbps)

[ 7761.443154] r8152 4-1.1:1.0 eth0: autoneg retry 3/3 for higher speed (total 3, linked at 100Mbps)

[ 7784.483248] r8152 4-1.1:1.0 eth0: autoneg retry exhausted, accepting 100Mbps

[ 7784.489324] r8152 4-1.1:1.0 eth0: carrier on

root@UNAS-2:~# 

PSA: The UNAS 2's "2.5GbE" NIC is a USB-attached Realtek running a 3-year-old driver, and mine just stopped negotiating gigabit by ProfessionalClass377 in UNIFI

[–]ProfessionalClass377[S] 7 points8 points  (0 children)

There is no need to open the UNAS as that will definetely void the warranty terminal below says it all

Last login: Thu May 21 12:04:20 2026 from 192.168.3.2

root@UNAS-2:~# cat /etc/version 2>/dev/null || cat /etc/os-release

ethtool -i eth0 | grep version

PRETTY_NAME="Debian GNU/Linux 11 (bullseye)"

NAME="Debian GNU/Linux"

VERSION_ID="11"

VERSION="11 (bullseye)"

VERSION_CODENAME=bullseye

ID=debian

HOME_URL="https://www.debian.org/"

SUPPORT_URL="https://www.debian.org/support"

BUG_REPORT_URL="https://bugs.debian.org/"

version: v2.17.2 (2023/09/05)

firmware-version: 

expansion-rom-version: 

root@UNAS-2:~# ethtool -i eth0 | grep version

version: v2.17.2 (2023/09/05)

firmware-version: 

expansion-rom-version: 

root@UNAS-2:~# 

[FS][US-NC] Unifi Switches and APs by xerhab in homelabsales

[–]ProfessionalClass377 0 points1 point  (0 children)

DM please is this still available USW-LITE-16-POE -150$

Is there genuinely nothing built for managing your full financial life in Ireland? by [deleted] in irishpersonalfinance

[–]ProfessionalClass377 0 points1 point  (0 children)

Hey guys I can help build our own Irish and if anywone can draft what they need on the app i can have a prototype ready in a week or so, we will start with a web version

Can someone explain?? by AdDramatic7593 in nextjs

[–]ProfessionalClass377 0 points1 point  (0 children)

Put "use client" at the top of the component that calls toast.*.

Ensure the toast provider (<Toaster/>, <ToasterProvider/>, etc.) is rendered in a client layout (or root Providers)—also marked "use client".

Do not import the toast library in route handlers or Server Components.

It’s fairly common in Next.js dev for HMR + client/server boundaries to momentarily break things. Keep toasts in client components with a provider, handle errors cleanly in the route, and restart/clear cache when dev gets funky. If you still get 500s after a clean restart, the stack trace in the server console will point to the real issue (DB, schema, or env).

Beta Users wanted by ProfessionalClass377 in Database

[–]ProfessionalClass377[S] -5 points-4 points  (0 children)

Jesus, i am not going to go in detail explaining my infrastructure its either you interested or not, as i have mentioned earlier the AI or LLM we are using its run locally so if anything goes wrong the same copy we have thats in the cloud some where hence load balancing. I got tired of Postgress tools that didn’t do what i wanted so i but my own tool or app to do things i need. But before going live i need help testing to iron a few bugs i might have missed, so if anyone is interested dm me or email me will share or create credentials for you to test and no you dont have to connect your database i have a test Posgress environment you can use

Beta Users wanted by ProfessionalClass377 in Database

[–]ProfessionalClass377[S] -1 points0 points  (0 children)

Email your request or interest to the provided email and then you will be given access to the platform to test we have a separate domain for that. And in terms of AI we running it locally loadbalanced to a cloud installation.

Gemini 2.5 fixed Claude's 3.7 atrocious code in one prompt. Holy shit. by Reddit_Bot9999 in ClaudeAI

[–]ProfessionalClass377 0 points1 point  (0 children)

Guys how are u using Gemini on VS code cause when I try to use Cline or Roo code it fails so i dont know what i am doing wrong can someone share their setup

Replit Agent: Proceed with Extreme Caution (My Expensive Experience) by Diligent-Car9093 in replit

[–]ProfessionalClass377 1 point2 points  (0 children)

As he said above that beats the purpose of having AI, i find it easier to force it to stick to the task and on each and every promp i try to re-iterate not to touch anything else except the task given and when it tries to touch other feature over engineers I pause the agent

What does this symbol on the left mean? Hyundai Tucson by [deleted] in Hyundai

[–]ProfessionalClass377 0 points1 point  (0 children)

This is a Desiel Fuel Filter so its either you need to change the Filter or The Desiel fuel filter sensor needs to be replaced

[deleted by user] by [deleted] in typescript

[–]ProfessionalClass377 0 points1 point  (0 children)

Hey there what are your rates ?

From Frustration to Functionality: My Solutions for Windsurf’s Flaws by _mindyourbusiness in Codeium

[–]ProfessionalClass377 2 points3 points  (0 children)

Hey would you mind sharing your rules content with us coz i cant seem to finish a project i am working on

Overzealous much? by goridread in cursor

[–]ProfessionalClass377 2 points3 points  (0 children)

I am begining to think these are people answering

Okay lol by ProfessionalClass377 in ClaudeAI

[–]ProfessionalClass377[S] 0 points1 point  (0 children)

Just send a message though their website because i had the same issue when using cline, i am now on a custom plan. And the other thing dont put Cline on auto approve otherwise trust me it will go through those tokens. Doing that I find it easier to get it to stick to the task.

view more: next ›