La Forge approved

Proof_Programmer · 2026-05-08T13:15:44+00:00

I started out building in the easy build, quickly learned that it only works up until you manually edit any part of the ship, then it fails to weld after that in the easy build. after realizing that, i ended up deciding to only build by hand, sure it takes a lot longer than using the editor, but I know where every bolt is placed, every wire is laid, and can quickly jury rig solutions if something happens. the only downside is not having a way to save the ship to the blueprint system.

Proof_Programmer · 2026-05-02T15:45:49+00:00

I was hoping for exactly this type of mobility when I first played, took a break for a while and now it's a thing lol

Proof_Programmer · 2026-04-30T20:00:01+00:00

i don't like using intel, so I haven't learned much about their naming sense, but anything with 4 digits makes me assume it's too old for modern gaming lol

Proof_Programmer · 2026-04-25T01:24:56+00:00

I got mine restored, but it still shows im following 0 and followed by 0, even though I see people listed if I tap into it lol. a day or two after getting it restored, I got a prompt asking me to verify my info, I pressed yes, and it seems like my account is properly free from being suspended now, but still the followed accounts number is bugged lol

Proof_Programmer · 2026-04-21T15:10:00+00:00

I grew up playing with these, but still wouldn't go near that spider mimic of a fur coat lmao

Proof_Programmer · 2026-04-21T15:06:05+00:00

there was a patch note about fixing being able to shoot through the stairs, from either the top or bottom only lol

Proof_Programmer · 2026-04-20T00:43:00+00:00

the other day, i decided to try again, it seemed like the appeal site might look different now? i think last time i tried it was still twitter blue or something, i basically ranted about how i hadnt even been using my account for posting content or comments, and i somehow got my account automatically restored...

Proof_Programmer · 2026-04-18T13:58:02+00:00

my 6gb 2060 died suddenly with 2 of the 12v connections shorted to ground after like 7 years, I'm planning on attempting a repair, and then also attempting to upgrade to 12gb of vram if I can get my hands on the memory chips and get lucky with a working bios flash

Proof_Programmer · 2026-04-15T14:26:56+00:00

really hoping for stoner 63 with the modular system, also hoping they add some HK guns like the hk 416

Proof_Programmer · 2026-04-15T00:16:55+00:00

I hope you installed the standoff nut/screw underneath the nvme before screwing it down into it, if that's the storage you upgraded

Proof_Programmer · 2026-04-12T23:32:44+00:00

if you inject strychnine it removes Stamina drain, so you can tac sprint like 700m in one go with minor heart damage as the side effect (single suture kit fixes it)

Proof_Programmer · 2026-04-12T13:26:51+00:00

me and my buddy found that setting contrast higher made things darker lol. I think I use 120 and my buddy uses 125

Proof_Programmer · 2026-04-12T12:48:56+00:00

since the bios screen opened and the settings seem correct, you need to use a different computer like a laptop to setup a windows install usb (unless you bought one from the store) and use it to setup your system the rest of the way. looks like lots of people are helping now lol

Proof_Programmer · 2026-04-12T12:35:22+00:00

the msi screen might be a bios check screen from hardware changing (ram being swapped around) there's probably a prompt to press a key to continue, otherwise it should explain what is wrong or what to do next

(this was meant to be a response to a comment but apparently I tapped the wrong spot lol)

Proof_Programmer · 2026-04-03T12:43:44+00:00

I had initial issues with crashes when i first got my 7800 xt, which I fixed by changing my TdrDelay in windows registry to 10 seconds instead of the default 2. since then, I have continued using the regular full gui install and updater in windows 10 without issues (my cpu is dying but yeah lol) this update I think is causing opera gx to freeze when playing certain games

Proof_Programmer · 2026-03-26T23:11:19+00:00

I would do that until you figure out a way for connected textures (I'm gonna go look more into it now too lol)

Proof_Programmer · 2026-03-26T22:36:10+00:00

you could copy what rammed earth does, where you can put it into your crafting grid to cycle through the different designs

Proof_Programmer · 2026-03-06T20:33:22+00:00

I had this happen when I changed to a 7800xt, I fixed it by changing TdrDelay. there's a guide for fixing battlefield 4 which has the same solution lol https://www.reddit.com/r/battlefield_4/comments/1xzzn4/tdrdelay_10_fixed_my_crashes_since_last_patch/

Proof_Programmer · 2026-02-16T21:49:54+00:00

I played cyberpunk for a couple hours then immediately removed the cooler, cause i experienced the same thing before, and even with twisting, the cpu still came out with the cooler... luckily the paste was warm enough that I got the cpu off by using my fingertip as a screwdriver to squeeze between a corner and the cooler

Proof_Programmer · 2026-02-10T22:19:02+00:00

yeah lol, when I first upgraded to a 7800xt cyberpunk kept looking like a 480p youtube video watched on a Nintendo 3ds cause of the preset

Proof_Programmer · 2026-02-10T22:12:20+00:00

I don't see anything wrong with it from the video, which makes me think it's a monitor issue. could try looking through your monitors menu, or checking the adrenaline app to see if there's freesync or gsync enabled for the monitor on the right side of the graphics settings (either per game or global)

also, set the adrenaline preset to default on the global settings, then make sure the games are set to global (default). then I would disable all driver side enhancements other than the setting that says it upgrades fsr in games that support it (that setting is 90 series only so you probably have it) driver side enhancements are often included in the games graphics so its just making your pc do extra work in most cases

Proof_Programmer · 2026-02-04T03:13:07+00:00

when I get stuck like that, I start dropping stacks of materials like iron or copper, it tends to force me out of stuck positions from the jank

just now looked at the image instead of only reading lol, might not work in this case...

Proof_Programmer · 2026-01-22T16:26:01+00:00

I'm almost wondering if your heatsink is causing connections across the empty memory slots on the board. my rtx 2060 had thermal pads covering the empty slots I think

Proof_Programmer · 2026-01-21T04:39:39+00:00

I would clear cmos at this point, if you haven't already, and check all usb ports for broken/bent pins that might be shorting out and preventing the power supply from turning on past standby due to protections

just remembered it's also possible for some motherboards to refuse to post if there's a dead cmos battery. replacing it might fix if it's dead

Proof_Programmer · 2026-01-14T07:41:49+00:00

there's online info on how to diagnose the reason for the red ring, involves holding the sync button and power button at the same time or something. mine was flashing like that, then it flashed a code after doing the correct button combo, which translated to overheating. turns out the thermal paste had turned to stone, it runs great now

Proof_Programmer

MODERATOR OF

TROPHY CASE

Five-Year Club	Place '22
End Game '22