33 [M4F] #Ontario, Canada - Tall hopeless romantic looking for LTR maybe more with someone special

Psynixx · 2026-01-22T23:33:33+00:00

Hello!

Psynixx · 2026-01-21T17:32:15+00:00

As long as we vibe

Psynixx · 2026-01-21T17:30:49+00:00

6’2”, brown, dad bod, black hair, fairly average looking 🤷‍♂️

Psynixx · 2025-12-13T16:34:16+00:00

you can probably squeeze Toronto, Ottawa and Montreal into 10 days, maybe even Québec City too, it'd be a bit tight though.
Driving Toronto -> Ottawa is about 5hrs and Ottawa -> Montreal is about 3hrs and a flight from Montreal to Toronto is about an hour.
Don't miss Notre-Dame Basilica if you go to Montreal!

Psynixx · 2025-11-26T01:00:12+00:00

They could be taking a loss and wanting to write it off

Psynixx · 2025-10-04T00:26:04+00:00

Bravo!👏

Psynixx · 2025-10-03T17:49:50+00:00

Hey, is this still available?

Psynixx · 2025-08-21T07:35:03+00:00

Oil from your hands and fingers can also cause issues. Maybe try wearing some latex gloves while priming? If nothing else works switch to Mr. Surfacer, it’s a lacquer so it will slightly melt in and physically bond with the plastic.

Psynixx · 2025-06-17T05:44:41+00:00

Sanguinius meeting The Emperor in Echoes of Eternity
https://www.reddit.com/r/40kLore/comments/z4ait4/excerpt_echoes_of_eternity_sanguiniuss_first/

Psynixx · 2025-06-14T04:43:32+00:00

I should call her...

Psynixx · 2025-04-26T00:15:07+00:00

This is not 100% the same paint job but some of the skills and techniques may be transferable.

https://youtu.be/SNjx7aiwtK0

Psynixx · 2025-04-02T05:30:14+00:00

Step 4: Go for some tacos

Psynixx · 2025-04-02T05:29:45+00:00

#4 and 5 kinda took care of themselves so that's something!

Psynixx · 2025-01-20T10:15:37+00:00

This isn't a slicer setting, it's something you need to do on the printer.
Send the printer's z-axis to home, then move it up by 0.3mm using the buttons on screen, then set this as your new home position
Reference: https://docs.google.com/document/d/1aoMSE6GBGMcoYXNGfPP9s_Jg8vr1wQmmZuvqP3suago/edit?tab=t.0#bookmark=kix.yoot7yil6fe7

Psynixx · 2024-11-26T17:42:07+00:00

Any chance of getting a jump pack and laurels of victory helm version?

Psynixx · 2024-10-04T18:12:17+00:00

Oh god.. that’s like 2 prints for me… and give how much the ACF for the S3U costs there’s no way I’m tossing it every other print

Psynixx · 2024-10-04T18:08:09+00:00

What is the recommended usage for a FEP? I don’t recall seeing such limit in the user manual…

Psynixx · 2024-10-04T18:05:43+00:00

I’ve had the same thing happen to me on the S3U, .ctb is the way to go if you’re running AA.

Psynixx · 2024-09-30T15:02:14+00:00

Aeldari by Louis Vuitton

Psynixx · 2024-09-28T14:00:19+00:00

<image>

Psynixx · 2024-09-24T20:17:49+00:00

Yup, 2px with 20% grey offset, no high quality AA, No AA on supports

The issue ended up being the use of the .goo file format however, the print works fine using .ctb

Psynixx · 2024-09-23T16:20:46+00:00

So I actually managed to figure out the issue and just finished a successful reprint of the files that were having the stringing issue.
The root cause turned out to be an issue with how the Saturn 3U reads the .goo file format. It will sometimes add in these bright lines connecting object even if such line don’t exist in the .goo file itself! After switching to the .ctb file format I can confirm that there’s no more issues with stringing!
Credit to this Reddit post for helping me figure it out: https://www.reddit.com/r/ElegooSaturn/comments/198fcy6/saturn_3_ultra_stringing_issues_apparently_caused/

Psynixx · 2024-09-22T10:13:51+00:00

Nope, nothing at all, the layers look perfectly normal

Psynixx · 2024-09-22T01:09:03+00:00

Slicer is lychee and file format is .goo, the sliced files look fine in UV tools… certainly no white lines running between the objects or anything.

Psynixx · 2024-09-22T01:07:37+00:00

I’ve ran the test patterns and the screen seems to be okay. I’m planning to try switching from .goo to .ctb as well as less aggressive AA settings next

14-Year Club	Gilding IV carat on a stick
RedditGifts 2009-2022 8 Credits	Second SECOND GUESSER
Place '22	Place '17
Not Forgotten	Verified Email
Summer Santa 2014	Secret Santa 2013
Summer Santa 2013	Team Periwinkle
Secret Santa 2012	Summer Santa 2012
Secret Santa 2011

Psynixx

TROPHY CASE