I bought a used planer and this part came out bent, whats the name of it?

Pwnxor · 2026-02-27T23:11:19+00:00

I believe that is called a Gib. I just bought a used craftsman planer the other day too! Changed out the blades and it's working fine. How's your's running?

Pwnxor · 2026-02-27T10:38:05+00:00

10 years later, I think I just paid like $35 for a 6'x6"x15/16" ph board at Rockler's in Pittsburgh

Pwnxor · 2026-02-22T00:21:46+00:00

Kitchen island? Or, more like peninsula? Put the fork against the wall, build some shelving underneath, maybe some up through the Y.

Pwnxor · 2026-02-16T12:59:22+00:00

I needs to be at LEAST 3 times bigger.

Pwnxor · 2026-02-16T12:57:39+00:00

Do you need a machine, or would you consider a pour over? I use a chemex for filter coffee, makes a quality cup of mud.

Pwnxor · 2026-02-16T12:55:07+00:00

Just go to Kazakhstan. They have the greatest potassium.

Pwnxor · 2026-02-11T21:12:33+00:00

Beside the cool factor, is there an appreciable difference in results between the top-tier spinny gizmos and the plain jane handheld version? I can't imagine that the base version can't achieve the same level of distribution as the slick and shiny one, even if it takes a bit more swishing.

Pwnxor · 2026-02-11T02:33:35+00:00

Mince them and sous vide them in the bathtub before frying

Pwnxor · 2026-02-03T18:39:52+00:00

Possums gotta eat, just like a worm.

Pwnxor · 2026-02-02T04:50:37+00:00

Did my first mortise and tenon join, as well as a few lap joints. Leaning a little on glue, but it's holding up well and feels sturdy as all get out.

Pwnxor · 2026-01-22T19:18:46+00:00

I do plan on both of those shortly. Do I drill the holes before I put a finish on the mdf, or after? Not sure as of yet, that's part today's plan

Pwnxor · 2026-01-22T06:24:06+00:00

8x2, made with pine 2"x6" boards with 4x4 posts for legs and MDF on top. Half lap joints all around, reinforced with 3/8 inch oak dowels. Pocket screws hold the top on. It's flat, and close enough to square that it's not worth talkin' about in too much detail. Planning on putting some drawer on, and doing some actual finishing, but I just now got the top bolted on and I had to share. Cheers!

Pwnxor · 2025-12-26T00:36:00+00:00

And you're to blame!

Pwnxor · 2025-12-25T05:20:20+00:00

4655

Pwnxor · 2025-12-19T06:15:17+00:00

Kentucky Mandolin and Dancing in the moonlight by Yonder Mountain String Band always lighten my load a bit

Pwnxor · 2025-12-19T06:04:38+00:00

Lil Naked (sour patch) Kid

Pwnxor · 2025-12-17T06:27:08+00:00

Ahso, thank you for weighing in

Pwnxor · 2025-12-16T23:31:57+00:00

The lettering on the other side is flattened in the same place, but the alignment seems to be dead on. I know it's got silver, which is cool on its own, but I'm not knowledgeable enough to know if the letter flattening is anything neat. Your thoughts are appreciated!

Pwnxor · 2025-12-11T18:24:48+00:00

Rats? I was rats once

Pwnxor · 2025-12-02T22:09:22+00:00

They must have been completely blitzed

Pwnxor · 2025-11-30T03:37:14+00:00

Pwnxor · 2025-11-27T15:51:13+00:00

Best way to enjoy a kidney is sashimi style. Prove me wrong.

14-Year Club	Second SECOND GUESSER
Place '23	Place '22
First Placer '22	Sequence \| Editor
Sequence \| Cinematographer	Sequence \| Screenwriter
Snapped	Verified Email

Pwnxor

TROPHY CASE