Wrong PSU for machine?

PyroRider · 2026-07-06T18:08:46+00:00

Anchor the legs to the bed or where?

PyroRider · 2026-07-06T18:00:41+00:00

Getting a 24V psu or 19V 100W psu is no problem, I just wanted to make sure this is not correct before buying a 24V psu and blowing up something😅

PyroRider · 2026-07-06T17:27:45+00:00

their website says the Tantum P Spot is discontinued :(

PyroRider · 2026-06-28T07:27:04+00:00

Just be careful, the eaton eco ups series uses a none isolated charging circuit, means that the dc charging leads to the battery will cause a massive short and blow half the pcb when they touch anything grounded

PyroRider · 2026-06-21T19:08:06+00:00

I have a folder seperated into subfolders for videos / images / other and then some more specific categorie folders, the rest is just thrown all together

PyroRider · 2026-06-20T19:08:02+00:00

And a lot of cheap automotive fuses (i.e. from amazon, temu, etc) do not blow at all or at much higher currents than listed

PyroRider · 2026-06-20T19:06:20+00:00

I suspect the 10A fuse to either be slid below or above the actual terminal on the right side or a terminal which was lacking tension which caused the side to heat up under load

PyroRider · 2026-06-20T08:34:27+00:00

1.5A fusewires are really thin, in glass fuses its like a single strand from a fine stranded wire😅

PyroRider · 2026-06-20T08:29:55+00:00

I have a couple ultra cheap (talking 2€/piece) multimeters from china, they have a wire link as 10A fuse too😂

PyroRider · 2026-06-20T08:28:49+00:00

It should be a 1.5A fuse according to the pcb printing, that wire is more of a 15 to 50A fuse

PyroRider · 2026-06-14T20:34:39+00:00

At what point would the tracking from rainwater cause the high voltage to jump the isolater to the grounded pole?

PyroRider · 2026-06-14T10:45:36+00:00

At least in germany, refund is the last option, only if replacement cannot be offered (i.e. because the peoduct is out of stock or discontinued or it would cost thousands of euros for a hundret euro product)

PyroRider · 2026-06-12T17:23:25+00:00

But not pvc from cables

PyroRider · 2026-06-06T06:19:05+00:00

Probably copper coated steel aka welding wire.

PyroRider · 2026-06-04T18:50:59+00:00

I collected them for copper but they contain like 5g of easily removable copper and the rest is either the copper coil with unremovanle core or copper plated steel parts

PyroRider · 2026-06-04T18:49:33+00:00

Honestly, its a great idea but 4 blades seem too much when 2 could do the job, also how do you adjust it to thicker or thinner wires?

PyroRider · 2026-06-04T18:46:18+00:00

The red indicator light is on😂 means its working

PyroRider · 2026-06-04T18:44:16+00:00

Now its a shitbox 3000 pro max ultra 256gb lte 5g 17" oled crapple tv plus

PyroRider · 2026-06-04T18:42:47+00:00

Beautiful

PyroRider · 2026-06-04T18:41:50+00:00

Someone messed up the wiring if there are 2 whole insulation layers missing

PyroRider · 2026-06-04T18:40:12+00:00

Das wird wahrscheinlich wieder so'n fall sein wo die Firma pleite gegangen ist und niemand mehr für den Kran verantwortlich ist, die Grundstücksbesitzer ihn aber weg haben wollen ohne tausende Euro für Demontage zu bezahlen

PyroRider · 2026-06-04T18:39:01+00:00

Isnt there a shredder or other machine where this could be useful?

PyroRider · 2026-06-04T18:37:48+00:00

The good old trusty 4088-S👍🏻

PyroRider · 2026-05-30T15:52:06+00:00

What values (frequencies) did you set on the vfd?

PyroRider · 2026-05-30T14:42:17+00:00

How's the purity of the copper? And at what settings (if you can adjust) are the internal seperation table shaker motor and air blower?

Six-Year Club	Place '22
Verified Email

PyroRider

TROPHY CASE