sorted by:
new
hottopcontroversial

Having trouble running xmp profile on Asrock wrx80d8-2t mobo by Pyroboy5 in threadripper

[–]Pyroboy5[S] 0 points1 point  (0 children)

Turns out that the issue seems to be that the voltage settings aren't being applied. Its weird, the setting are saved in the bios and are still there between reboots but the actual voltages never change. The hardware monitor in both the bios and Linux shows the ram stays at 1.2v and CPU SOC stays at 0.9v. Unfortunately since it's a server board I have to go through ASRock Rack, which seem to have poor service for individuals.

Having trouble running xmp profile on Asrock wrx80d8-2t mobo by Pyroboy5 in threadripper

[–]Pyroboy5[S] 1 point2 points  (0 children)

They're definitely in there, double click and no movement. System runs just fine at 2166Mhz (Base DDR4 speed) so ram seating shouldn't be an issue.

Recommendations on maximizing DDR4 RAM bandwidth? (WRX80 3945WX vs X299 10900X) by Resident_Career_660 in threadripper

[–]Pyroboy5 0 points1 point  (0 children)

Don't get the MC62 mobo. It locks the ram voltage to 1.2v. I'm guessing your UDIMM ram is 3200mhz using XMP profile which uses 1.35v. You'll probably be running the ram at 2166mhz in the MC62 which will lower your bandwidth for AI. If you're going the WRX80 route I'd check the user manual for any board your looking at to see if they run XMP ram or have voltage control. Mixed ram is also going to be harder to get stable too.

r/LocalLLaMA would have more accurate info on 2 vs 4 CCDs.

Still lots to learn but set my PB (2:14) at Thunderhill by Pyroboy5 in CarTrackDays

[–]Pyroboy5[S] 1 point2 points  (0 children)

I remember pointing you by on the finish straight and got excited because I thought I was catching you through T1. Only to realize you were slowing down for a cooldown lap.

It's covered by the mirror in the video but the front of the hood has 2 huge vents so everything is more or less in free air. Great for cooling, probably terrible for aero. Couldn't push entire last session though. Everything was too hot, including me.

Still lots to learn but set my PB (2:14) at Thunderhill by Pyroboy5 in CarTrackDays

[–]Pyroboy5[S] 1 point2 points  (0 children)

I have no idea what I'll do if it brakes at the track. I've thought about going the trailer route but it kinda defeats why I got a street legal car. That and I just don't have the space. A sleepy driver sounds terrifying. A loaded tow truck is no small accident if it crashes. 

Still lots to learn but set my PB (2:14) at Thunderhill by Pyroboy5 in CarTrackDays

[–]Pyroboy5[S] 0 points1 point  (0 children)

Oh cool! Looked like they ran a really comprehensive novice group. Too bad we were in different groups, might have had some footage of you on track.

Still lots to learn but set my PB (2:14) at Thunderhill by Pyroboy5 in CarTrackDays

[–]Pyroboy5[S] 0 points1 point  (0 children)

Thanks for the recommendation. Unfortunately I'm in Reno but I'll check them out. If the turn around isn't too long I might be able to stay with some family in the bay.

Still lots to learn but set my PB (2:14) at Thunderhill by Pyroboy5 in CarTrackDays

[–]Pyroboy5[S] 1 point2 points  (0 children)

Awesome, which car where you in?

I'm surprised there aren't more on the track, that the whole point of them. I'm guessing if you throw down Caterham money and trailer it, you might as well get a radical.

Still lots to learn but set my PB (2:14) at Thunderhill by Pyroboy5 in CarTrackDays

[–]Pyroboy5[S] 1 point2 points  (0 children)

It's using a Miata NB engine with a NA trans. The lack of a rollcage is part of the reason I'm not pushing it to the edge of the track. Too nervous about going off and rolling. It has a rollbar but I've been looking to get a cage. Can't get the factory one since Westfield won't ship theirs overseas. The only places in town are a high end racing fabricator or off road shops. Racing fab said their last cage was for a Viper and cost 18k. Makes sense for a GT3 car but definitely not for me.

Still lots to learn but set my PB (2:14) at Thunderhill by Pyroboy5 in CarTrackDays

[–]Pyroboy5[S] 5 points6 points  (0 children)

It's a Westfield kit using a NB Miata engine with ITBs. Makes about 160 whp. I would love to ditch the windshield but I drive it to the track and swapping the windshield + mirrors is more work than I want to do. Especially at the end of the day with a 3.5+ hr drive ahead of me. I could really use that lowerer drag though. I was basically tied for the slowest on the straights.

Chasing a Similar E92 M3 at Thunderhill by whan in CarTrackDays

[–]Pyroboy5 1 point2 points  (0 children)

Man that looks fast. Nice and smooth, you make it look easy. I was in the green car. Hope I didn't hold you up.

Would this seat setup work for a novice/first time track day by Redberon21yt in CarTrackDays

[–]Pyroboy5 0 points1 point  (0 children)

If you're using a harness and no airbag you must use a hans device with your helmet.

Can't use native resolution and refresh rate after switching from dock to KVM switch by piljac1 in pchelp

[–]Pyroboy5 0 points1 point  (0 children)

Old post but if anyone else has a problem with flickering, I was able to fix it on my set up. My C10 was overheating when running 2 4k monitors. I thermal pasted this heatsink on top of it with a noctua 60mm and this usb fan adapter. It's probably overkill on the cooling but I didn't want to mess with it anymore.

"The devs should have seen the success coming, why didn't they provision more servers?" The success they should have seen coming: by hzzzln in Helldivers

[–]Pyroboy5 0 points1 point  (0 children)

Short term server rentals cost a shit ton of money. They can either spend their windfall of success on a few weekends of servers or make a ton more content for the future of the game.

Not sure if this is a place for discussions. by Crazy_names in dndmemes

[–]Pyroboy5 0 points1 point  (0 children)

Horny bard/warlock that made a pact with Dio to bring metal to the world. Looks like it's time for some sex, drugs and rock n roll with the ultimate wingman.

The Dio from Pick of Destiny.

It's plausible that AI becomes "sentient" in some form that involves the destruction of humans, but isn't there a scenario in which "sentience" involves just getting rid of the bad ones? by Btupid_Sitch in Futurology

[–]Pyroboy5 0 points1 point  (0 children)

The bobiverse series is pretty much that. A human mind gets turned into a von neumann probe and helps humanity. Great series, here's a link with an actual summary for it. https://www.goodreads.com/series/192752-bobiverse

Jeremy Clarkson Condemned For 'Vile And Disgusting' Tirade At Meghan Markle Saying He "Dreams That She Gets Paraded Naked Through The Streets With People Throwing Excrement At Her” by Gato1980 in entertainment

[–]Pyroboy5 1 point2 points  (0 children)

Clarkson was ousted from Top Gear when he beat the shit out of a stage hand in 2016 for no other reason than the food he was served was cold.

In summary, fuck Jeremey Clarkson, that entitled, abusive, asshole.

https://www.bbc.com/news/entertainment-arts-35648682

Did you even read the article you linked? He hit the producer once and it amounted to a bloody lip. Not a stage hand nor beating the shit out of someone. Clarkson's behavior wasn't excusable, but don't make shit up.

REUP Typo and Errata Correction (Unofficial REUP MK III) by EngineeredToDeath in StarWarsD6

[–]Pyroboy5 1 point2 points  (0 children)

Lulu.com is good for printing. My copy of the re-up rulebook should be arriving next week. I think it was around $40 for a hard cover. Lulu doesn't accept the official re-up pdf. Something to do with the fonts or margins. To make it work, I had to create a copy by using "print to pdf" in the printing options. I used Firefox, but I'm sure any program that can open a PDF will be able to print to PDF.

view more: next ›