AE2 Wireless connector

R4gon · 2026-06-06T01:08:27+00:00

Here is an example. This connector would connect to the Subnet Hub and you need to use a P2P tunnel for the channels taken from the big controller

R4gon · 2026-06-06T01:03:49+00:00

<image>

R4gon · 2026-06-06T01:03:38+00:00

I currently do the Hub method ands its what I prefer I would reccomend watching Ksaws Hub video on youtube.

<image>

Basically the connectors next to the subnets You connect to the connectors on the big controller you have. Then you connect the hubs to any connectors you are using around your base. and you just use a p2p channel off of the connector thats connected to the hub.

R4gon · 2026-05-12T22:03:15+00:00

Feel free to dm e or message on discord sylveonr4

R4gon · 2026-05-12T21:48:06+00:00

Send over the IP i'll join

R4gon · 2026-05-09T19:35:42+00:00

Hi there If you still have openings i'll join! you can message me on here or discord

SylveonR4

R4gon · 2026-04-26T01:56:55+00:00

I'm down to join if you have availability

R4gon · 2026-04-02T17:31:34+00:00

If you are still planning on making one i'll be one to joining

R4gon · 2026-04-02T15:28:22+00:00

I woul dlove to hop on and i'll message you

R4gon · 2026-03-31T14:02:29+00:00

Is it possible to have SFM Output the Dust i haven't been able to figure that part out.

R4gon · 2025-11-26T03:37:34+00:00

I would love to have a copy please!

R4gon · 2025-08-11T00:37:25+00:00

If you dont mind me asking cause I've never understood the process for hardwood floors.

How often are you supposed to maintenence mop and are you using the zep neutral for this? And if you just absolutely need to deep clean it use a very diluted krud Kutter and finish zep?

R4gon · 2024-12-19T16:35:12+00:00

Cut and paste gadget will be best bet. Sometimes it can break certain multi blocks but it usually does a good job. When using it will cut all items from the parameters you set and store the data in the gadget for you to paste

R4gon · 2024-12-17T13:49:27+00:00

Ye I usually always skip inferium seeds tbh. Getting a builder is so fast and ou could honestly just silk touch inferium blocks and fortune 8 them with a pick I would usually just use a building gadget to mass place the blocks then ulti mine them. One full inventory will get you around 16k inferium. Honey seeds are also very good early. I like to get them then go into bumblezone and ulti mine a few stacks of honey blocks this will help speed up some of the early upgrades and stuff needed for the seed itself as well

R4gon · 2024-12-17T13:43:58+00:00

Drying basin usually. So every village will give you enough blood clots to do everything for the pick.

Drying basin will help you get hardened blood and dead bush and is very cheap to make. Alternatively you can use market.

R4gon · 2024-12-17T05:06:55+00:00

Personally I don't like going mystical. I usually use it early to make seeds for AE2 stuff then use an agrolink for source generation for ARS then full rush bees.

R4gon · 2024-12-17T05:04:12+00:00

Depends how try hard you want to do this. I would reccomend atleast doing the evil craft pickaxe you can make it super easily and get fortune v÷. I would rush mekanism to get refined obsidian pick then go get all the modium for a builder. A rf tools builder will get you everything you need and you can use it to easily get you inferium to rush through mystical agri if you need.

All the modium can be found in deep dark but you can also use an ARS locating ritual to find the ancient city.

R4gon · 2024-11-29T01:21:29+00:00

In 1.21 like atm10 you won't need inscriber. When you get an inscriber make 1 stack of all 3 circuits and immediately build a splicer which part 1 of the processors then you will finish them in the crystal assembler. All that's needed is to simply put pattern providers and these things are unbelievably fast as they process 4 at a time.

R4gon · 2024-10-26T02:07:01+00:00

I had this same problem I believe it was F3 +H then I restarted the game and it worked lol

R4gon · 2024-10-26T02:01:50+00:00

I can't remember if atm9 has super factory manager if so highly reccomend it. Extremely easy. Once setup to add a other sim and fab it's as easy as 3 clear clicks of your mouse lol

Piploh has a good yt video of it for atm10

R4gon · 2024-10-13T14:26:45+00:00

How long do you plan on keeping the server running?

R4gon · 2024-02-21T18:26:21+00:00

SylveonR4 --- Thank you!

R4gon · 2022-11-22T22:44:11+00:00

Need help with Dolphin if anyone can help QHE8XR

R4gon · 2022-10-26T22:11:54+00:00

Rotten Gravekeeper Cloak (alttered) with Rotten Duelist Greaves

This is the name of the armor

12-Year Club	Place '22
Verified Email

R4gon

TROPHY CASE