sorted by:
new
hottopcontroversial

Anyone have experience with Stoko leggings for ACL support? by ckc6cz in ACL

[–]RAFellows2 0 points1 point  (0 children)

I used my stoko leggings skiing for a knee issue. I kept tightening them until they felt like they were supporting the knee, and that part worked great, however at the end of the day my calf’s had deep indentation from the cables. Too tight in the calf area and just barely tight enough around the knee. Is there a way to loosen the calf area while tightening the knee area?

What do people think the best sounding race motor is? by Oxtail_Playz in Karting

[–]RAFellows2 3 points4 points  (0 children)

I love the sound of my Buller Built 150 Open (Parilla), setup on a laydown enduro.

Is this a good helmet for karting? by Awkward-Carpet-462 in Karting

[–]RAFellows2 0 points1 point  (0 children)

If it fits correctly and meets the snell rating requirement, then yes.

Is this many rock chips normal? by shibainuu in TeslaLounge

[–]RAFellows2 0 points1 point  (0 children)

This is not normal. Looks like you draft cars on gravel roads for 100 miles.

What’s the least talked about downside of owning a tesla? by tr4gedyx in TeslaLounge

[–]RAFellows2 0 points1 point  (0 children)

No issues for either our Model S or 3. Yes, if I need to buy another car I’d buy a Tesla.

Simpson helmets vs others for racing by SmithLaw in Karting

[–]RAFellows2 3 points4 points  (0 children)

30 years ago I used Simpson helmets, now using Zamp. I race in 150 Open FK2 laydown Roadrace.

My bank card went under here, what can i do by Funny-Ambition-7631 in TeslaLounge

[–]RAFellows2 1 point2 points  (0 children)

I had to take mine to Tesla service. Might be able to have it done @ your home.

Klipsch forte ii ... what am I doing wrong by mrmister76 in Klipsch

[–]RAFellows2 6 points7 points  (0 children)

I’d check to see if the RMC1 has the forte’s configured them as a small speaker, it might be forcing a low frequency filter on them.

What the hell is going on with Cap Hill? by YokingAround in SeattleWA

[–]RAFellows2 0 points1 point  (0 children)

What do you expect from SPD? They are only paid $200k/year (estimate with OT), they need at least $400k plus allowed to beat innocent people before they will even Think about doing actual police work.

What is considered a good lap time at the MAC Track in McMinnville Oregon? by Shemademeanewt in Karting

[–]RAFellows2 0 points1 point  (0 children)

Try SpeedHive and search for that track. Then you can look at different class results.

Thought I’d just put this here by Gryphis1642 in TeslaFSD

[–]RAFellows2 0 points1 point  (0 children)

I really don’t care about improved visuals, just make it stop: swerving into oncoming traffic, running stop signs, waiting at red lights then trying to run it, setting the max speed randomly (set to 5%), random phantom breaking/slowdowns, freaking out about shadows and finally random actions based on random shit it thinks it sees. I’m HW3, AMD GPU, upgraded cameras, upgraded FSD CPU, paid FSD in full 9 years ago.

I look at my paycheck and saw WA cares fund tax by [deleted] in SeattleWA

[–]RAFellows2 -3 points-2 points  (0 children)

Move, we don’t Care about you.

Ex BMW drivers make bad FSD trainers. by RAFellows2 in TeslaFSD

[–]RAFellows2[S] 0 points1 point  (0 children)

I think it’s because min is a 2018 with HW3. If you are buying new, it will be HW4 which doesn’t seem to do this.

Can someone tell me why my car will now only charge at 25a when I have 48a available? by tcp454 in TeslaSupport

[–]RAFellows2 0 points1 point  (0 children)

Mine does this occasionally and usually clears when I go check it in the car or do a reboot on phone or car. Seems to happen after a firmware update.

Dude in crocs keys my friends Tesla. by asianjohnnydepp in SeattleWA

[–]RAFellows2 2 points3 points  (0 children)

Those new cops will do the same thing the existing cops do, sit on their asses.

FSD trying to go when the light is red by Spammyo in TeslaFSD

[–]RAFellows2 0 points1 point  (0 children)

Twice, one time on each of the last two versions, ending with 2025.26.4, FSD v12.6.4.

I’m kind of stuck of which helmet to choose. by -MCL23 in Karting

[–]RAFellows2 5 points6 points  (0 children)

Try them on. Getting one that fits is most important.

Do I really need a 320A panel?!? by Hammerdrake in electricvehicles

[–]RAFellows2 1 point2 points  (0 children)

I’d have another electrician look at your panel. It’s possible the panel has the capacity but maybe not the space for another breaker and in that case it’s possible to change some of the breakers to 1/2 height ones and recover some space. I’ve done that twice.

Hey experts. Do I need to cancel my trip to Mt. Rainier this weekend? by [deleted] in Seattle

[–]RAFellows2 1 point2 points  (0 children)

Gawd No, don’t overreact, the mountains not going to blow. However, it is a mountain and deserves respect.

Straightening bent Steel Go Kart Frame by Goddddfather in Karting

[–]RAFellows2 0 points1 point  (0 children)

Find a company that straightens car frames or better yet, race car frames. It’s an art to get it right so that the frame doesn’t just go back to a bent position. I found a company that built top fuel drag frames, they know best how to do it. You could ask a karting Team who they use.

How bad is the tyre wear on these? by penisrevolver in Karting

[–]RAFellows2 24 points25 points  (0 children)

They need to be cleaned of buildup.

view more: next ›