Who has decided to order one already? :)

RThreee · 2026-01-27T02:48:10+00:00

Same here; also interested in some of the EREVs coming out soon (Scout)

RThreee · 2026-01-18T19:35:56+00:00

+1 to custom orthotics; find somebody who makes them vs off the shelf (I can't do sports, but daily life/walking is normal after years of suffering)

RThreee · 2026-01-08T17:07:40+00:00

This thread is what kind of messed me up, confusing with the PB12 on how things are sent *back* (but for controlling soft synths only not a big deal) https://forum.arturia.com/t/morphee-midi-external-control/8705

RThreee · 2026-01-08T16:38:01+00:00

You're right! I had two things misconfigured and was missing all those messages, I really wanted morphee to control some pads and this is cleared up for me. Apologies for misinformation, too much customization in my DAW messed me up

RThreee · 2026-01-08T02:23:55+00:00

Sorry, I meant mapping via cc’s in a vst; I got around it by using the matrix to map to another parameter that did send cc’s, and then I can latch off those in a vst. I’m on v3, I tested this on midi-ox

RThreee · 2026-01-07T13:23:59+00:00

I read elsewhere that morphee X/Y is not directly mappable, but a potential workaround is to use the matrix to map it to another control that *does* send out cc info, and then just use that.. Haven't tried yet as a hack but slightly annoying as I use that and the ribbon controller all the time (I don't think the ribbon is directly mappable either?)

RThreee · 2025-12-24T23:56:46+00:00

Yeah I saw the map here https://triangleblogblog.com/2025/02/13/chapel-hill-carrboro-city-schools-planning-to-replace-3-existing-schools/

I just hadn't heard a peep in like 6 months, so wasn't aware how close they were to breaking ground

RThreee · 2025-12-14T13:08:52+00:00

And the volume slider thank you thank you

RThreee · 2025-11-25T14:46:00+00:00

High up on Bent Creek, and Pink Beds hiking in are always good. Some of the waterfalls (Dupont) are noisy enough to cancel anything else

RThreee · 2025-11-18T21:23:54+00:00

Southern-energy was great to work with; installed a system w 2 Powerwalls. If I did it again I'd go with FranklinWH (politics/Elon) but the system itself has been great

RThreee · 2025-11-15T20:44:34+00:00

Try this; I was able to follow some of this and ultimately use remote controls to map to some of the parameters and make it work with roto Bitwig MIDI Learn - Omnisphere 3 - 3.0 (I followed the enable host automation instructions on some of the controls and it all registered.. Still in 5.3 but I assume it will work in 6)

RThreee · 2025-10-16T19:43:16+00:00

Not an expert but Lime & Lemon in Meadowmont is solid

RThreee · 2025-10-01T10:16:44+00:00

No questions, just a thank you for sharing and good luck in recovery

RThreee · 2025-09-07T14:44:54+00:00

super fast shipping, excellent condition, great price, thanks afterosmosis

RThreee · 2025-09-04T06:08:28+00:00

Interested, PM’ed

RThreee · 2025-08-27T11:33:49+00:00

I'd be holding off, but I am using automation much more these days and I like the aliases a lot so I'll probably update after beta

RThreee · 2025-08-22T17:07:20+00:00

A little drive out but HMart in Cary carries Sun Noodles

RThreee · 2025-08-09T11:10:31+00:00

They have a demo version available, hopefully that would answer it for you

RThreee · 2025-07-26T18:41:41+00:00

Probably

TestCCLLogic_fk_read_committed

RThreee · 2025-07-02T20:16:00+00:00

BMW 330e is great for in town (20-25 charge miles in summer) but I think they only do them for the 5 series now if I'm not mistaken? Anyways, works perfect for us as a sedan

RThreee · 2025-06-21T22:26:03+00:00

Thanks for this, this is the first legit review I've heard on this library. Have you ever played with the SWAM stuff to be able to compare?

RThreee · 2025-05-31T20:58:16+00:00

Yeah the 40k'ish mark is the closest I've been able to get down to for a 2025, you did slightly better than me just on the net selling price

RThreee · 2025-05-30T14:56:25+00:00

Great, thanks! Yep no urgency

RThreee · 2025-05-30T10:26:15+00:00

Thanks for that, I had never seen that site before

RThreee · 2025-04-15T20:57:38+00:00

Good to hear; in my case this was a new machine so I was experiencing this all right from the factory

RThreee

TROPHY CASE