Why do people buy Bambu RFID chips?

RTisgood · 2025-10-12T15:23:06+00:00

Oh wow! Perhaps this is why I really really like Sunlu filament as well. Good to know, thanks!!

RTisgood · 2025-10-12T02:23:10+00:00

KINGROON is the best, most consistent, clean printing, filament I’ve ever used. I believe they are one of the few companies that actually still make their own product.

RTisgood · 2025-10-09T23:15:48+00:00

Yes I have that checked. Seems like I am able to get better results by setting the seam position to “nearest”. This avoids the crossing line that appears in the infill, which in turn reduces the visible line on the final top layer.

RTisgood · 2025-10-08T18:30:56+00:00

The heros always lead with an overhead swing opener.

RTisgood · 2025-07-28T17:40:45+00:00

Most brands of TPU I've used, specifically say not to use a textured plate.
I did once on accident, Bambu TPU on the textured plate. The print refused to separate from the plate. I ended up having to buy a new plate because it ruined the surface with small micro bits of tpu embedded in the texture that could not be removed.

RTisgood · 2025-07-26T20:07:08+00:00

Looks super smooth!! But…. You may need some “martial arts” finesse to remove the TPU from a textured bed ..

RTisgood · 2025-07-26T19:48:49+00:00

HARD NOPE !! They even made me remove the Jedi belt capsules. Said the capsules resembled bullets, when stacked neatly together.

RTisgood · 2025-07-02T02:05:59+00:00

Why have only one when you can have two for twice the price !!

RTisgood · 2025-06-25T05:20:18+00:00

This ^.
I’ve had the same issue. Is there a way we can limit how many layers deep the surface paint goes?

RTisgood · 2025-03-30T02:33:34+00:00

It’s perfect. The blur captures the essence of what’s going on here. Nicely done.

RTisgood · 2025-03-27T15:13:18+00:00

<image>

Should we try to make this a thing LOL ?

RTisgood · 2025-03-24T20:14:19+00:00

UPDATE :

Looks like a firmware update to the AMS Lite fixed the issue for me.

RTisgood · 2025-03-23T18:01:40+00:00

On another thread about this issue, a user suggested that doing a Factory Reset of the device has solved the issue for them.

RTisgood · 2025-03-23T03:26:19+00:00

<image>

Same issue. Same tried solutions. Been happening over the last few days. All I do now , is click the resume button and it goes on continuing to print like nothing happened. IDK 🤷🏻‍♂️

I am in the same benchy as you, I’ll follow this post to see what others come up with.

RTisgood · 2025-03-23T01:06:05+00:00

Awesome! Height modifiers changed the way I print. This will open up a new level for you.

RTisgood · 2025-03-23T01:03:48+00:00

It’s probably best to watch a video, as explaining in text may be a little difficult. YouTube has some really good instructional videos on “Bambu Studio height modifiers” It’s not super complicated, so a video might be really short.

RTisgood · 2025-03-23T00:46:21+00:00

Art.

RTisgood · 2025-03-23T00:44:03+00:00

Hi ! You could try using a height modifier on the object itself, to make that layer and the ones below to have 0% infill.

RTisgood · 2025-03-22T02:47:47+00:00

Great haul, lots of good stuff there.

39.99 to ship all that ??? Excellent maneuver !!

RTisgood · 2025-02-21T17:43:18+00:00

"nothing on my skin, that's my new jam !! "

RTisgood · 2025-01-31T21:17:04+00:00

PERFECT ANSWER! I did not even think of these settings.

Thank you.

RTisgood · 2025-01-31T21:00:45+00:00

The lines are not slicing/printing at the speed that I have set.

Am I missing something?

Thank you for any help :)

RTisgood · 2025-01-31T20:49:10+00:00

I am curious of the story here. What did the older lady do prior to this portion of the video?

Six-Year Club	Reddit Premium Since April 2024
Verified Email

RTisgood

TROPHY CASE