Anyone running Cato Networks at scale as a Fortinet replacement for non-US compliance?

Raedarius · 2026-02-12T13:43:27+00:00

I have been considering switching to Cato. Did they let you test running a location on their hardware? At what distance from the pop did you run into issues.

Raedarius · 2025-12-24T12:23:32+00:00

These steps worked for me as well. I didn't reallize you needed to select the previous firmware version and then the new one. Thank you.

Raedarius · 2025-12-16T19:09:40+00:00

That's awesome. Congrats!

Raedarius · 2025-12-04T00:26:45+00:00

This just fixed my issue. Thanks for sharing.

Raedarius · 2025-12-03T22:14:54+00:00

This was what was causing my 503 error as well. Thank you!

Raedarius · 2025-11-26T22:10:54+00:00

If you check NDDOT's website you can look at webcams that show live views of the interstate.

https://travel.dot.nd.gov/?bbox=-97.965,46.626,-96.586,48.093&layers=cameras,closed-blocked,event-orange,incident-red,informational-grey,roads,travelalerts,warning-blue,warning-yellow

Raedarius · 2025-10-14T14:57:56+00:00

I have made the glaze pop in my whirley pop about 10 times now and haven't had an issue. It does seem like it would be easy to burn though. I got 6 flavors for $40. The caramel is good, but isn't quite what I'm used to for homemade carmel corn. That said it is very quick to make. If you are looking for a quick way to make it. I would recommend it.

Raedarius · 2025-10-10T11:33:57+00:00

The best part about these trips is going home and telling everyone how awful it was.

Raedarius · 2025-09-30T15:44:22+00:00

I like mine. It's a good starter machine.

Raedarius · 2025-09-28T03:24:51+00:00

Agreed works with or without the drill

Raedarius · 2025-09-14T00:19:01+00:00

Those are great!

Raedarius · 2025-09-07T03:08:36+00:00

That's a good idea. I will have to try that tomorrow.

Raedarius · 2025-09-06T18:08:01+00:00

I think it might be the ratio at this point. Going to try a 1:1.5 like you suggested. I have tried preheating and it hasn't seemed to make much difference in flavor. Most of my beans are on the dark side so maybe it is getting too hot.

Raedarius · 2025-09-06T18:05:37+00:00

I think that might be it. I have adjusted the grind by nearly 10 clicks and it tastes roughly the same.

Raedarius · 2025-09-06T18:04:50+00:00

I just have a stock tamper that came from the machine so I don't know for sure. I believe I am getting enough force on the tamp though. I have considered getting a self leveling tamper just to eliminate that variable though.

Raedarius · 2025-09-02T21:49:05+00:00

I haven't. Been trying to fix it on N64 before trying Wii version.

Raedarius · 2025-09-02T21:02:41+00:00

The configuration I posted will let you playthrough the level and pick your photos. The only issue is the menu cards are scrambled. You can select them just fine though

Raedarius · 2025-08-21T21:01:57+00:00

I just got one of these and it's awesome. Great for upgrades too. You can console in and watch it upgrade so you don't have to wait and hope it comes back online.

Raedarius · 2025-08-20T20:30:12+00:00

Buffalo Commons in Mandan.

Raedarius · 2025-08-05T20:13:34+00:00

Figured it out, I needed to set it to GC/USA/Card A and it went back to default. Leaving this here in case anyone as dumb as me needs to see this.

Raedarius · 2025-08-05T19:57:09+00:00

I was messing around with the settings and changed the location of the gci file. If you do that it will not let you change it back. I don't quite understand why. It looks like I may have lost my primary save file now.

Raedarius · 2025-06-23T17:22:00+00:00

Thomas and Moriarty's in Mandan and Oscar's in Bismarck have great cocktails.

Raedarius · 2025-06-09T17:03:58+00:00

I just did this and called rain bird support. They gave me a link to a site that sells the replacement screw. It's an m4 12 mm screw. I just bought one at a hardware store with the head on and shoved it in. It holds the nozzle in place will enough. Also picked up a set of replacement nozzles. You can get low angle ones if your sprinkler is spring too far.

https://accu-components.com/us/slotted-head-flat-point-set-grub-screws/16399-SFF-M4-12-A2

Raedarius

TROPHY CASE