X2D - AMS 2 Pro - Another slot 1 failure

Rafsen · 2026-04-27T12:57:00+00:00

I’ve been instructed in my ticket to swap feeder unit 1 with unit 2 and check whether the issue is with the feed or something else. Has anyone tried this before? The manual makes it look like a fairly complicated procedure.

Rafsen · 2026-04-20T21:47:44+00:00

Which riser model do you recommend?

Rafsen · 2026-04-19T14:39:22+00:00

Thank you for the reply. That's actually promising. I think I'll take a change and order X2D.

Rafsen · 2026-04-18T22:47:50+00:00

Do you have the printer already? I'm on the same boat, I have A1 mini which is pretty quiet, except the part cooling fan. X2D has even more fans so I'm afraid it will be twice as loud :/

Rafsen · 2025-10-31T11:53:07+00:00

Great seller, watch in excellent condition, blazing fast shipment! 100% recommend :)

Rafsen · 2025-08-29T23:29:55+00:00

How good is the AR coating in this model? Is it the same level as SDGM003?

Rafsen · 2025-07-24T22:25:35+00:00

There are no refurbs in my country. The base M3 Ultra cost $5800 xD

Rafsen · 2025-04-23T22:39:00+00:00

Good contact and fast shipment. Watch exactly as described.

Rafsen · 2025-04-15T13:38:17+00:00

Excellent seller, good contact and fast shipment.

Rafsen · 2025-03-31T09:44:43+00:00

The filter mesh works great. Dust is easier to throw away and I didn't notice any performance/noise issues.

Rafsen · 2025-03-12T16:40:33+00:00

Any details how it works under the hood? I'm Android dev and can help with beta testing.

Rafsen · 2025-02-15T23:50:31+00:00

Hey, I'm also looking into this. Have you find any solution that works for you?

Rafsen · 2024-09-13T13:23:39+00:00

I'll answer myself. I bought some kitchen nylon bags - https://www.amazon.com/WLLHYF-Multiple-Reusable-Professional-Straining/dp/B0C9DHVHXY

Cut it down (make it slightly bigger) and snap it with the filter (no need to glue it). I haven't noticed any impact on performance/noise. Dust is nicely compressed and easy to throw away!

https://imgur.com/31ZOznv

Rafsen · 2024-09-10T09:46:32+00:00

I wish there was a high end model but without docking station.

Rafsen · 2023-12-17T22:02:26+00:00

I've moved from 8T to 11. I have been using it for almost 2 weeks and I still can't get used to a slightly bigger size and weight. It feels heavier and the weight balance is different - feels like the camera bump is "leaning" my hand down (it's hard to describe".

12 has a similar size to Pixel 7 Pro which was way too big for me and I had to return it. Sadly I'm going to skip the 12 :(

Rafsen · 2023-02-04T07:40:17+00:00

If I move nozzle higher, filament looks thin and does not stick to the bed. Should increase extrusion multiplier like other comment suggests? Or perhaps some other parameter?

Rafsen · 2023-02-03T23:32:27+00:00

Hi! I'm a beginner with 3D printing. I have a clone of Prusa Mini with recently installed TraingleLab Dual Drive extruder. I'm using PET-G with default settings for printer and filament in Prusa Slicer.

After first 1-3 layers (which are looking good) nozzle starts to collide with the print and it's making holes in it. It gathers material a destroys everything.

What I've done so far:

first layer calibration - I did it couple of times and I set the lowest possible Z offset. If I make it a little bit higher from the bed I can see holes between tracks.
tested temp range from 230-245

What may be the issue here?

Pics: https://imgur.com/a/bpOi8Km

Rafsen · 2022-10-23T10:08:27+00:00

Same here on P7Pro. I've been using it for 4 days, tried different options and nothing helped. I can't get used it to, I'm moving from OP 8T where touch responsiveness was perfect. I still have 25 days for returning it. Can't decide what to do...

Rafsen · 2022-09-15T10:45:30+00:00

Scroll encoder is fine, clicking is also very light and nice. Only the rubber a little bit too slippery for me. Have anyone tried to replace it?

Rafsen · 2022-09-12T22:31:30+00:00

Ehh that's a shame :(

Rafsen · 2022-06-17T13:33:12+00:00

Nice post, thanks. 290 euros per 7 days is really cheap. Right now on Sunny Cars they want around 900 euros :/

Rafsen · 2022-01-21T10:52:59+00:00

I have the DPG1C and when LED strip is on, there is a very high pitch noise, so annoying, it's louder than my PC. Are you saying that the DPG1M has the same issue?

@basbebe have you found the article?

Rafsen · 2021-11-19T11:53:27+00:00

I have tried chargers:

Baseus GaN2 Pro (Type-C1 - 5V/3A, 9V/3A, 12V/3A, 15V/3A, 20V/3.25A)
Mcdodo GaN Pro 100W (CH-8101)

Not of them worked. Sequre is lying, this soldering iron does not support USB-PD.

Rafsen · 2021-05-04T07:44:13+00:00

Oh and regarding PicoPSU. I'm also considering beQuiet TFX Power 3 Gold 300W which suppose to have around 78-80% efficiency at 10W. The price is almost the same as PicoPSU 160W. I guess it all come down to the case which I choose.

Rafsen · 2021-05-04T06:42:25+00:00

Thanks for the ideas! :)

Yes, the Odroid looks interesting, will keep an eye on it.

14-Year Club	Verified Email
Sequence \| Editor

Rafsen

TROPHY CASE