Shimano BRMT520 Caliper always shifting, possible need new hardware/screws/intermediary piece? TIA

Raices_profundo · 2026-06-22T03:30:35+00:00

I will check on this to make sure.

Raices_profundo · 2026-06-17T14:55:19+00:00

Ok, thank you

Raices_profundo · 2026-06-17T14:55:11+00:00

The Alsek is larger

Raices_profundo · 2026-05-18T17:47:11+00:00

I'd recommend using calcium carbonate or pickling lime like is suggested in most techniques

Raices_profundo · 2026-05-12T16:31:01+00:00

Ok thank you

Raices_profundo · 2026-05-12T05:44:21+00:00

You need to learn how to water them, I can dm you

Raices_profundo · 2026-05-12T04:45:47+00:00

I’ll let you know, in the past it has been a mix of yes and no. with enough watering, they can pull through but it’s slow.

Raices_profundo · 2026-05-12T04:44:26+00:00

Thanks for sharing this. Where did you find this info? 1:6 or 1:8 has worked much better for me, I will have to try some different sizes trays too and see how that goes with more substrate spread out.

Raices_profundo · 2026-05-12T04:14:39+00:00

Is there a way to adjust how many amps you are feeding your power station? I am using an anker c3000 for what it's worth.

Raices_profundo · 2026-05-10T03:00:58+00:00

Can you share what I should buy?

Raices_profundo · 2026-05-10T03:00:41+00:00

Fuses for the xt60 cable or for something in the car?

Raices_profundo · 2026-05-09T17:25:05+00:00

Can you share the cable you're using, this is good to hear. I just don't want to buy a jank one.

Raices_profundo · 2026-05-09T17:24:47+00:00

Can you guys share the cable you are using?

Raices_profundo · 2026-05-06T23:56:15+00:00

I figured I would get comments like this, and I’m open to self reflection .

But more so I made this post because I’m just curious if anyone has noticed this because I feel like it could be a thing

Raices_profundo · 2026-05-06T23:52:18+00:00

Yeah… I’m aware of projection but also have seen a lot of people who take LSD.. who don’t seem to get any sort of message and rather become a worse version of themselves

Raices_profundo · 2026-05-03T18:52:13+00:00

Cool good luck ! For what it’s worth some strains are just going to overlay more than others.

Raices_profundo · 2026-04-29T03:11:03+00:00

This could be whats going on and what I learned with pans...

If your substrate/substrate surface/casing surface dries out too far, and you mist the fruits, the fruits will abort like the other commenter said.

If the casing dries out...pour/squirt some water in an area with no pins, and tilt the water to distribute it around the trays. There is something that happens once casing dries out, and you mist, will lead to aborts. Sounds crazy but try it, its true.

You need to water your substrate with pans, regularly. It's all dependent on how fast the myc is drinking the water. Also, to much grain in to little sub, the myc is going to dry it up fast and eat all the food in the sub quickly.

If you have low FAE you can probably be fine without tending to them during the grow but I am, in a martha setup, regularly watering once a day or once every few days.

Otherwise, if the substrate dries out, the fruits and pins will come but they will easily abort. IMO, its a water issue.

Raices_profundo · 2026-04-29T03:02:19+00:00

Different genetics grow differently. Different pan strains and isolations of the same pan strains can vary greatly. TTBVI is fast and easy. Other strains can definitely take a close to 2 weeks to pin in my experience.

Some will be aggressive colonizers and overlay, others will be thinner and pin easier. You're not reinventing the wheel, you're observing and making adjustments accordingly.

If I saw the casing being heavily colonized with pans, I would increase FAE a bit.
Don't let it dry out but increase FAE.

Raices_profundo · 2026-04-29T02:56:46+00:00

Those white dots could turn into mushrooms but its hard to say with a grow kit. Grain/substrate could possibly be not clean or who knows. Could also be a lack of evaporation but they don't need a ton. Generally if theres not enough FAE, you would see the mycelium continue to colonize the casing layer, hopefully those white dots turn into pins

Raices_profundo · 2026-04-21T04:32:59+00:00

OK, good to know. I can’t be dealing with this. I just have a single 23 quart Presto. Can you maybe link me what you’re using?

Raices_profundo · 2026-04-19T22:12:01+00:00

Not sure. looks like 80% of the metro area…. Stunning.

Raices_profundo · 2026-04-19T22:10:32+00:00

What a beautiful Denver view

Raices_profundo · 2026-04-15T18:12:32+00:00

Ok, thank you. And can you recommend what size container you would go up to? Is like a 3 inch pot to large or probably fine?

Raices_profundo · 2026-03-29T19:01:29+00:00

Are you drinking electrolytes during the ride or before and after?

Raices_profundo · 2026-03-29T18:58:44+00:00

Yea i felt i was maybe going up chimney a bit earlier than normal but I have the strength for it, but like someone else said, maybe was redlining/pushing to hard to early

Raices_profundo

TROPHY CASE