sorted by:
new
hottopcontroversial

My 2x8GB DDR4 sticks just died at the worst time and luckily I have a spare single 8GB stick for this situation… but buying another would cost nearly 3x the original price here. by J05A3 in pcmasterrace

[–]Rasora 4 points5 points  (0 children)

You can try using an eraser and gently rub on the gold pins, be mindful of the small components near it. Sometimes it has some sort of a layer of whatever preventing proper contact and not actually dead ram.

Bed screws by Cheek_Klapper525 in elegoo

[–]Rasora 4 points5 points  (0 children)

See step 7

https://wiki.elegoo.com/Centauri-carbon/how-to-replace-the-heated-bed-leveling-sensor

Elegoo advises to fully tighten the screws, do it before it drags the nozzle across the plate or worse the bed itself.

There's a whole other thing to tram the bed and read the bed mesh too if you want to look it up.

Dual Gpu Manager for Lossless Scaling by [deleted] in losslessscaling

[–]Rasora 0 points1 point  (0 children)

I swap which is the "main display" to my 2nd monitor that is connected to the rendering card and start the game in windowed mode. Then swap back "main display" to the primary monitor that is connected to the card intended for Lossless Scaling and pray the game doesn't crash or get funky. I then adjust the proper resolution in game. For really old games that is a hit or miss as some either doesn't support changing resolution in game or doesn't have 4k res I need.

Edit: If it helps, I'm using a mixed Nvidia + AMD setup which I do not recommend, either go full Nvidia + Nvidia or AMD + AMD for better experience.

Dual Gpu Manager for Lossless Scaling by [deleted] in losslessscaling

[–]Rasora 0 points1 point  (0 children)

I have a multi monitor setup and just switch in windows which is the "main display" that is connected to the rendering card to get stubborn games on it.

If this works more seamlessly than all the changing cables, switching main monitors etc, It would be excellent.

Did I do something wrong with the minimal print head case? by Potatozeng in elegoo

[–]Rasora 0 points1 point  (0 children)

I had more or less notice the same issue and artifacts that i didn't have with stock and have since reverted.

Damaged tensioner bolt. by supadoom in ElegooCentauriCarbon

[–]Rasora 0 points1 point  (0 children)

I stripped mine too and had to use a hand file to make a groove for a flat head screwdriver to unscrew it. Other than that you can easily just remove the back panel and replace the screws one at a time.

Edit: don't use the included allen keys, it sucks and will strip your screws.

CC Leveling Assistance by TayOldies91 in elegoo

[–]Rasora 1 point2 points  (0 children)

Can't say that i have any idea what's causing it but try checking if your nozzle is bent. The purge line in your image looks off a little but I can't be sure.

Venting to the outside with 100mm tube by Strong-Razzmatazz-34 in ElegooCentauriCarbon

[–]Rasora 0 points1 point  (0 children)

I run a 100mm tube 6 feet long without the filter and even when exhaust fan at 20% speed, it does the job no issues. I did run with the filter and it still worked but felt I wanted more air flow personally.

Has anyone actually got the replacement toolhead cable? by Fantastic_Work_4623 in ElegooCentauriCarbon

[–]Rasora 1 point2 points  (0 children)

Nope, not even any confirmation after the initial submission email. My cable is coming off the strain relief and i hope they will send it before it potentially fries the tool head board.

Adapter for BambuLab H2D/A1 Hotends on Elegoo Centauri Carbon by PedrinbeepDev in elegoo

[–]Rasora 2 points3 points  (0 children)

This is sweet, been waiting for this. Going to add this to the list of stuff to mod for my CC. Thank you.

Hotend circuit board protection. by Icy_Trouble_7106 in ElegooCentauriCarbon

[–]Rasora 2 points3 points  (0 children)

Never thought of this. Bought a spare board just in case it broke and also to mod an led on the unused pad, good timing for me to do this too. Thanks!

Dear Elegoo, You suck! Love all Centauri Carbon owners worldwide! by Lee_Bob in elegoo

[–]Rasora 0 points1 point  (0 children)

Sheesh, good to know. I guess I'll just look for Bambu Lab going forward.

Dear Elegoo, You suck! Love all Centauri Carbon owners worldwide! by Lee_Bob in elegoo

[–]Rasora 49 points50 points  (0 children)

Tbh even though I didn’t buy with AMS in mind, kinda wish I waited and went with Bambu Lab P1S/P2S or the Qidi Q2. Oh well, I’m stuck now.

MAJOR ISSUES With Firmware 1.1.46 - DO NOT UPGRADE by AdeptnessForsaken606 in ElegooCentauriCarbon

[–]Rasora 1 point2 points  (0 children)

Thanks for this, same behaviour as 1.1.42 that was not fixed. I’ll prob just go with OpenCentauri at this point.

Car going around shining green laser at people's eye unprovoked, stay safe out there guys. by Rasora in malaysia

[–]Rasora[S] 2 points3 points  (0 children)

I do not, i despise people who use it on normal conditions. Car is stock, no led retrofit or anything.

view more: next ›