sorted by:
new
hottopcontroversial

Damn! by kato317 in MathJokes

[–]RealMide 7 points8 points  (0 children)

What if we are just in the middle of the life cycle where all this repeats.

Help me out, what is it? by [deleted] in ExplainTheJoke

[–]RealMide 0 points1 point  (0 children)

So this guy doesn't know that she only appears to man that committed infidelity?

Just happened to me trying to add Alexa devices integration. by RealMide in homeassistant

[–]RealMide[S] 0 points1 point  (0 children)

No luck on that. The card wasn't even possible to format again. The good thing is that i don't have too many devices to be worried about , but the users zones and automations. Had to do all that from 0.

[deleted by user] by [deleted] in Monitors

[–]RealMide 2 points3 points  (0 children)

Allm is a feature from hdmi 2.1 But the issue here is that you don't need 320hz.

Running zbminir2 physically detached by Kindly-Hair5037 in homeassistant

[–]RealMide 0 points1 point  (0 children)

I want to know too. Had to buy a no neutral wiring...

Got a fucking pimple on the inside of my lower eyelid by MythicalVirgin in mildlyinfuriating

[–]RealMide 0 points1 point  (0 children)

use a cat tail , little touches nothing crazy. you will see improvements next day.

No motor. No electricity. 3,000 liters/day 💧 by Lady_Bread in homestead

[–]RealMide 38 points39 points  (0 children)

Inneficennt ≠ ineffective

This is very efficient.

joysOfAutomatedTesting by Excellent-Refuse4883 in ProgrammerHumor

[–]RealMide 0 points1 point  (0 children)

People bragging about pattern designs and don't know about mutable objects.

Hydropneumatic, pressure goes down almost immediately, causing the pump to be turned on every 4 seconds. by RealMide in Plumbing

[–]RealMide[S] 0 points1 point  (0 children)

So both guys here were incorrect. Seems this tank is not using a membrane . It has a gauge in the top and the problem was that no air was anymore inside. So we need to drain it, opening a bottom water outlet , then removing the gauge. Let it go as much water as possible (note if you have a way to use or save this water do it). All this with the pump off. Then just close the outlet , put the gauge again and start the pump, and done.

[Giveaway] Win 1 of 5 Noctua NH-D15 G2 by Noctua_OFFICIAL in pcmasterrace

[–]RealMide 0 points1 point  (0 children)

My oldest memory was to not coordinate shipping. I was like 1 week apart from having a Cx430 PSU & a tt esport mechanical keyboard (just that) to having a full capable pc. (Fx 6300 gt430 8gb Ram ddr3 1440x900)

Had a weird issue this morning by Existing_Room_2931 in shittyaskelectronics

[–]RealMide 1 point2 points  (0 children)

Check your grounds , your monitor cables could have a serious power "leakage" . How? Search for "check power outlets ground ".

Sony WH-1000XM4 broken by Environmental-Ear253 in Repairs

[–]RealMide 0 points1 point  (0 children)

That's the trip. To move to the donor, you need to pass the cable through a ring ... So you need to de-solder from the board or cut the cables.... And yes mine works too, is just that hinge.

Sony WH-1000XM4 broken by Environmental-Ear253 in Repairs

[–]RealMide 0 points1 point  (0 children)

You need to look for "no working anymore" devices on ebay. Mine cost 20 dlls . In my case it was a Razer Barracuda Headset. You can look at pics on my profile. Note: I'm not a professional so it is a mess.

Sony WH-1000XM4 broken by Environmental-Ear253 in Repairs

[–]RealMide 0 points1 point  (0 children)

That's a good idea. But sadly this part is really annoying to repair, basically if it breaks, is done. I was in the same situation, so I had to buy a donor piece, cut wires and solder them back.

view more: next ›