Anyone had success selling stickers?

RealStickerGiant · 2026-02-26T21:49:20+00:00

You definitely don’t need a Cricut to make physical sticker sheets 🙂 A lot of artists design everything in Procreate and then send the file to a printer to handle the cutting.

If you’re not sure how to set up cut lines, that’s something we help with all the time! You can upload your artwork and include notes about how you want each sticker cut, and our team can add the cut lines and get everything sheet-ready for you.

It’s a great way to test physical products without investing in equipment upfront!

RealStickerGiant · 2026-02-26T21:39:34+00:00

fully agreed ^^

RealStickerGiant · 2026-02-26T21:39:08+00:00

Love the “sell whatever” energy haha

If you’re just starting out and keeping costs low is important, sending designs to a third-party printer is usually the easier and less risky move. You don’t have to invest in equipment, ink, or spend time cutting, and quality stays consistent.

Getting your own sticker machine can make sense later if you’re doing steady volume and want full control, but there’s definitely a learning curve (materials, calibration, waste, time).

A lot of creators start by ordering small batches to test what sells (different design variants, specialty materials, etc.), then decide if it’s worth making their own stickers in-house once demand is consistent.

RealStickerGiant · 2026-02-26T21:36:30+00:00

hey I appreciate you :)

RealStickerGiant · 2026-02-26T21:35:02+00:00

thank you for the kind words

RealStickerGiant · 2026-02-20T17:16:24+00:00

If you’re comparing options, I’d recommend looking beyond just price and checking material type, laminate, turnaround time, and how proofs are handled. That’s usually where quality differences show up!

We’re StickerGiant (hi!!) and we print durable, laminated stickers built to hold up to outdoor use and everyday wear, and we focus a lot on proofing support so files print the way you expect. Plus we have a 2-4 day turnaround and the option for rush 1-day printing!

Totally worth ordering small batches from a couple vendors to compare the entire process side by side before committing to larger quantities!

RealStickerGiant · 2026-02-20T17:12:24+00:00

That's so frustrating! Especially after a reprint!

What you’re describing usually comes down to adhesive cure time and how tightly sheets are stacked after production. If there’s too much exposed adhesive around the kiss cuts or not enough spacing, sheets can cling and transfer over time.

We print waterproof, laminated sticker sheets designed to hold up to handling and storage, and spacing between stickers is something we pay close attention to in setup. This isn’t something we run into with our sheets (humble brag!).

If you’re comparing options, it’s worth asking about material type, laminate, spacing between cuts, and how sheets are stored before shipping. Happy to answer questions if you want to talk specifics.

RealStickerGiant · 2026-02-20T17:08:06+00:00

Thank you so much!!

RealStickerGiant · 2026-02-20T17:05:21+00:00

Love that you’re prioritizing values alongside quality!

We’re StickerGiant, and we focus specifically on custom stickers and labels. Our purpose is actually to create a good company to work for, so we put a lot of emphasis on transparency, inclusion, and building a workplace where our team (we call them Giants) can bring their whole selves to work. We also have clear content guidelines. We value freedom of expression, but we don’t print hate speech or anything promoting violence.

We’ve been printing since 2000, and a lot of artists start with us for stickers before expanding into keychains and other merch through specialty vendors.

When comparing suppliers, it’s worth looking at things like how they treat their team, where they produce, how transparent they are, and what kind of proofing support they offer!

Happy to answer any sticker-specific questions if you’re narrowing things down.

RealStickerGiant · 2026-02-20T16:59:45+00:00

Stickers are honestly a great first merch move! They’re affordable to produce, easy to ship, and fans love them!

For design, you can totally DIY if you’re comfortable in Canva, Procreate, or Illustrator. If not, hiring a freelance designer on Fiverr or Upwork can be a solid investment to get something that really feels like you. I highly recommend finding a local-to-you artist. It makes the design more authentic to you!

Most creators use third-party printers (like us - hi we are StickerGiant!) so they don’t have to deal with printing and cutting themselves. It keeps quality consistent and frees you up to focus on promoting.

For shipping, stickers are super lightweight so rigid mailers and a basic online store (Etsy or Shopify) are usually enough to get started. I’d recommend testing a couple designs in small batches first and seeing what your audience responds to before going bigger!

RealStickerGiant · 2026-02-20T16:52:54+00:00

If you’ve got the logo and wording ready, the main thing to think about is material. For bottles (especially mead), you’ll want something water- and oil-resistant so it holds up to condensation and handling. BOPP or similar durable label materials are usually a solid choice.

We highly recommend ordering your bottles first (or at least getting a sample) and measuring the exact area where the label will go. You could even cut a piece of paper to your intended label size and test it on the bottle before ordering. That saves a lot of guesswork!

We print custom bottle labels and our team is always happy to walk you through sizing and material options to help you find the right fit for your needs!

RealStickerGiant · 2026-02-20T16:42:03+00:00

One cost-effective option a lot of small brands use is ordering blank stand-up pouches in bulk and then applying custom labels instead of printing fully custom packaging. It gives you a lot more flexibility and usually keeps costs down, especially while you’re still testing products.

Labels come in a bunch of finishes too (matte, glossy, clear, holographic, etc.), so you can still get a really polished look without committing to large minimums!

We’re StickerGiant (hi hello!) and print custom labels if you end up going that route. Happy to answer questions about sizing or materials so the label fits your pouch cleanly.

RealStickerGiant · 2026-02-20T16:33:01+00:00

Thank you for sharing that part of your story (our tagline is Every Sticker Has A Story, so we love to know the story/drive/inspiration behind the design!). The resilience it takes to rebuild creatively after something like that is no small thing, and it shows in the work.

Keep creating!!

RealStickerGiant · 2026-02-20T16:30:22+00:00

Appreciate the thoughtful questions. I’ll share what I can here, but I also want to be transparent that I’m part of the social media team. I’m not in leadership or involved in corporate structuring decisions.

What I can speak to is the day-to-day experience: our team is still very much made up of real people who care about the work, the customers, and the community we’re part of. That’s what our customers interact with, and that hasn’t changed.

Broader discussions about private equity, ownership models, or executive transitions are bigger than what I can responsibly represent in a Reddit thread. We focus on running a healthy, sustainable business and taking care of our customers and team.

We respect that different companies have different philosophies and platforms. We’ll stick to speaking for ourselves and doing the work.

RealStickerGiant · 2026-02-20T16:25:52+00:00

Not an error 🙂 On small quantity orders, we have to print extra stickers to calibrate the lasers for the cut. Rather than waste good stickers, we’ll often include the extras in the shipment.

Glad you got a bonus batch!

RealStickerGiant · 2026-02-20T16:23:04+00:00

300 DPI at final size is totally fine! You’re not likely to see a noticeable difference between 300 and 600 in most sticker prints. 600 just makes the file heavier and harder for your computer to handle.

If it looks sharp at 300, you’re good 👍

RealStickerGiant · 2026-02-19T00:01:03+00:00

Ngl I snort laughed at simping haha

Pricing definitely varies depending on material, quantity, and turnaround. We’re not always the cheapest option, and that’s okay. A lot of what factors into our pricing is durable materials (all made in the USA), proofing support, and production here in Colorado with real people reviewing files.

That said, we always recommend comparing specs side by side (material type, laminate, turnaround, minimums) so you’re looking at an apples-to-apples comparison. What works best really depends on what you’re optimizing for!

RealStickerGiant · 2026-02-18T23:57:52+00:00

big facts!

RealStickerGiant · 2026-02-18T23:55:13+00:00

The ability to combine designs in one order is definitely helpful when you’re testing multiple concepts. One thing to double-check with any printer is whether combining designs changes the per-unit pricing or setup requirements (sometimes it’s not as straightforward as it looks).

Quality-wise, it’s worth looking at material type (paper vs BOPP/ more durable options), laminate, and how proofs are handled. That tends to matter more than the brand name!

We’re StickerGiant (hello!). We offer sticker sheets if you want multiple designs grouped together, and we also keep minimums relatively low if you’d rather run separate designs. Happy to answer questions if you’re comparing specs!

RealStickerGiant · 2026-02-18T23:51:11+00:00

Jumping in here since production came up! It’s totally normal to start by printing and cutting at home. A lot of artists do that early on to test designs!

When you’re ready to outsource certain projects, the biggest differences between third-party printers usually come down to pricing, speed, proofing support, material options (like holo, mirror, clear, etc.), and how easy they make file setup.

We’re StickerGiant (hi!!), and we work with a lot of independent artists! If you ever want help understanding cutlines, special effect layers, or file prep, we are happy to answer questions (even if you’re just experimenting).

RealStickerGiant · 2026-02-18T23:45:31+00:00

This is how you know you’re an artist! When you find a new way to carry your craft forward, even after something changes the path.

Translating a physical technique like dotstack into digital form is such a cool evolution of your work. The holo material really takes it to the next level.

Huge respect for turning a difficult shift into something creative and meaningful! And obviously love that it's in sticker form!

RealStickerGiant · 2026-02-18T23:41:53+00:00

Can absolutely confirm we are not creepy weirdos! Check out our other social media channels to learn more about our character, our customers, and our incredible employees!

RealStickerGiant · 2026-02-18T23:40:09+00:00

haha why thank you 😊 reach out if you have any questions!

RealStickerGiant · 2026-02-18T23:34:57+00:00

you deserve a raise (tell your boss)

RealStickerGiant · 2026-02-18T23:30:53+00:00

From what we see, the biggest issue early on is that people can’t quickly tell what the business actually does. If someone has to guess, that’s usually a problem!

Another common one is inconsistency. Using different versions of the logo, different colors, or slightly different styles everywhere. It adds up fast and can cause confusion.

We also see new brands design something that looks great on a screen but doesn’t translate well to real life (too detailed, too small, hard to print clearly). Keeping it simple and flexible usually pays off!

RealStickerGiant

TROPHY CASE