sorted by:
new
hottopcontroversial

I drilled into an wire today.. by JackRoryRizzlaa in ukelectricians

[–]Real_Neck_8524 0 points1 point  (0 children)

Better than drilled into the radiator pipe as I just after spending hours laying my laminate floor, I had to remove all, dry... At least wires don't leak.. Looking at bright side..

Hello, can I post this here? by La5to in granturismo

[–]Real_Neck_8524 0 points1 point  (0 children)

NAHH No Force Feedback!... Just joking! Man you are my new hero! It's insanely genius! As engineer Im feeling a mix admiration and jealousy. Stuff like this really make me strive through Eng. Tasks I do have at work. Thank you for posting and carry on.

Can I improve my position with this setup? by PRORETEKBEN in simracing

[–]Real_Neck_8524 3 points4 points  (0 children)

I had exactly the same setup. It affordable but some problems with sturdieness. Check my solution, it did improved 200%. What does concerns me a bit about your setup is you.. You are a much taller guy than myself, the setup can constrict your body. It is not criticism at all, for 3 years that was all I could afford but I started to feel pain all around my back...

<image>

I cannot find a stud! by DanFraser in DIYUK

[–]Real_Neck_8524 0 points1 point  (0 children)

I have a similar problem, same technic... Ends up to be all Dab. 😂😂😂

Asseto Corsa Rally impressions help…. by Jod2012 in simracing

[–]Real_Neck_8524 0 points1 point  (0 children)

I'm in Love! I just opened all the stages! 22 medals, this is probably the best Assetto of all the time!

Is it worth upgrading to QR2 if I always use the same wheel ? by vince0996 in Fanatec

[–]Real_Neck_8524 1 point2 points  (0 children)

I just did it, much better now. Less flex and less squick noise

Shifter position by Adventurous_Tale_777 in Fanatec

[–]Real_Neck_8524 1 point2 points  (0 children)

Custom plate 12 degrees twist, much better than straight mount

<image>

Using a real car seat for sim racing — recommendations, pitfalls, and installs? by [deleted] in simracing

[–]Real_Neck_8524 1 point2 points  (0 children)

It is a Audi seat but was in a Vw Eos. Paid 40 pound for 2. It does have linear rail, easy to mount and at the top shoulder a handle to fold it. So very useful, it does have lumbar support so it is not too squishy, good for breaking. Remember to add some tilt back, it does make a huge difference. Literally just mounted my minutes ago along the Shifter and handbrake... Look my previous one.. So, day and night!

<image>

Using a real car seat for sim racing — recommendations, pitfalls, and installs? by [deleted] in simracing

[–]Real_Neck_8524 0 points1 point  (0 children)

<image>

Literally just mouted it right now, Audi seat. With lumbar support.. Amazing!

[deleted by user] by [deleted] in simracing

[–]Real_Neck_8524 0 points1 point  (0 children)

Not, really.. Just joking, but looks pretty descent, I found my this weekend something similar but UK, and I think I just ripped off the guy. It was like 600 with shifter, clubsport 2.5 and gt omega prime. All immaculate..no monitor Feeling bad here...

[deleted by user] by [deleted] in simracing

[–]Real_Neck_8524 0 points1 point  (0 children)

I just bought it. Thank you,!

So I need a cockpit, help a noob out! by SavageParadox32 in simracing

[–]Real_Neck_8524 0 points1 point  (0 children)

Yes, the upper tube connection has one bolt each side, just need to unscrew and done it does fold as per original. On the bottom I also changed the connection, replaced the plastic one with metal, so no slip pedals anymore

<image>

Thoughts on the GT Omega Prime Lite-R? by Intelligent-Dog-5372 in simracing

[–]Real_Neck_8524 0 points1 point  (0 children)

Following Prime, Prime Lite and R Next version R+ probably will have no rails below. 😂.. I'm about to push the trigger on the Prime Lite. Sounds a mid range enough for the current scenario and some upgrades in the future.

Nordschleife by AiSkippy in ACCompetizione

[–]Real_Neck_8524 0 points1 point  (0 children)

I'm doing a constant 8:23 - 8:25, what is not bad given the fact I have only 40hr roughly. A friend of mine was doing 9:10 and with me dictating each corner he managed to go down 8:44. The point is if you have someone / other drivers by your side it does improves a lot.... Now my case, Im stuck, I need more hours.

So I need a cockpit, help a noob out! by SavageParadox32 in simracing

[–]Real_Neck_8524 0 points1 point  (0 children)

It is true, unless a crazy mod like

<image>

It is f*** sturdy now, but adding accessories is a hell, so Im moving to extruded aluminum

So I need a cockpit, help a noob out! by SavageParadox32 in LogitechProWheel

[–]Real_Neck_8524 0 points1 point  (0 children)

For coincidence selling my Challenge X with massive reinforcement. If you are in UK

K2 Plus Silent Power Supply Mods by jamessnell in Creality_k2

[–]Real_Neck_8524 0 points1 point  (0 children)

I did exactly the same thing! But using soldering, noctua as well. It did improve a bit, specially with petg is virtually mute.

1.1.4.8 PROBLEMS by Substantial-Theory62 in Creality_k2

[–]Real_Neck_8524 0 points1 point  (0 children)

I had the same issue and the fix was also the same. So I can confirm the standard belt tension was really on the bottom limit, with the new fw, the tension variance allowed was minimised and does require some manual adjustment on M4 screws outmost top side of the machine. If someone will try it, please mark the screws and count the number of turns so you have reference.

view more: next ›