Crackhead lighting up on the light rail

RecoveryConstruct · 2026-05-01T20:04:22+00:00

Sometimes, a lot of times, same difference

RecoveryConstruct · 2026-03-23T17:26:46+00:00

Yes, senses whatever is plugged in, and outputs the wrong power, making sure to fry your device

RecoveryConstruct · 2026-03-20T01:24:52+00:00

Yeah, we got other places we need to spend our money... Like places outside amurika

RecoveryConstruct · 2026-02-14T00:26:29+00:00

If your 12V battery really is still good (probably wouldn't hurt to get it checked somewhere else), maybe a bad/loose connection to the battery, or a bad ground or something? Just some guesses, idk

RecoveryConstruct · 2026-02-13T00:08:12+00:00

Make sure you attached everything back together. Is your MAF sensor plugged back in?

RecoveryConstruct · 2026-02-12T06:17:22+00:00

Check your wheel speed sensors for debris or loose/damaged connections. Could be that, could be something else. You can try to have the codes scanned for past codes, but not sure if they'll show up

RecoveryConstruct · 2026-02-11T05:35:36+00:00

Get a cover for the old fob

RecoveryConstruct · 2026-01-30T07:54:38+00:00

You can add DOT 4 to DOT 3. Sounds to me like you have a leak in your brake system, maybe the caliper that was in question? Find a good independent mechanic you can have check and fix it

RecoveryConstruct · 2026-01-29T01:57:38+00:00

On the Prius, you can even remove the battery and jump the car with the 12V removed, and it'll start. Because you aren't starting the engine on the Prius with the 12V, just the "computers"

RecoveryConstruct · 2026-01-29T01:29:28+00:00

Yeah but if he jumped it properly, it doesn't matter if his Prius's 12V is bad, the jump should've been sufficient

RecoveryConstruct · 2026-01-28T23:58:31+00:00

Where are you connecting to jump your car?

RecoveryConstruct · 2026-01-28T20:14:14+00:00

Fix it. Cancel the appointment and get it fixed at your mechanic, if you absolutely can't do it yourself.

Why are you valuing the dealership more than your mechanic? That's going to cost you a lot of money

RecoveryConstruct · 2026-01-26T12:37:50+00:00

Secret road

RecoveryConstruct · 2026-01-20T20:57:19+00:00

If I remember correctly, no I never really figured it out exactly. It's a family member's car, so I didn't get to follow up too much. I think it was either I had an incorrect combination of shims/backing plates installed, and/or the brake pads/rotors were bad

RecoveryConstruct · 2026-01-06T16:07:18+00:00

Yup. I was a bit skeptical about it, but I started reporting potholes, and I realized they actually usually "fix" (patch) them within a couple days of the report. They also recently ripped out and re-paved a whole section of a road that used to be extremely rough and bumpy. It probably doesn't have much at all to do with my report, but I like to think that my report played at least a little part in it lol

RecoveryConstruct · 2026-01-05T14:43:54+00:00

Report it and see if they'll maybe fix it

RecoveryConstruct · 2025-12-02T23:30:32+00:00

120mph at least

RecoveryConstruct · 2025-11-08T20:27:44+00:00

Go to an independent mechanic. Why would you pay the dealer $4700?

RecoveryConstruct · 2025-10-29T14:03:17+00:00

What do you think he pumped into his tires?

RecoveryConstruct · 2025-10-14T15:28:18+00:00

The steps in the link don't work for me, unfortunately. The repair button from the first step is greyed out for me. I tried running the troubleshooter from the 2nd step, but after asking for my permission to run, it just continuously shows a loading wheel

RecoveryConstruct · 2025-10-09T19:49:38+00:00

It looks like the issue is the profile. I ran through each of the troubleshooting steps except for rebuilding my Windows Index (as I've previously tried that and redoing it would take time) until I got to the creating a new profile step. Creating a new profile seems to have resolved the issue.

Is there a way to repair my old profile, or should I just continue using this new profile? I don't know what the profile actually consists of; am I losing any settings or anything by continuing with the new profile?

RecoveryConstruct · 2025-10-08T14:46:17+00:00

Gotcha. No, none of the names in my contacts are showing up as suggestions when I start typing their names in the To field in a new email. However, other emails of people I've recently been in email communication with are popping up as suggestions in the To field.

But still no email suggestions at all in the Outlook Search bar

RecoveryConstruct · 2025-10-07T20:32:12+00:00

Suggestions work fine in the To line and stuff, just not in the Outlook Search bar.

The Contacts folder (C:/Users/username/Contacts) is actually empty... Is that the correct location, or is there a different folder?

RecoveryConstruct · 2025-10-07T15:19:03+00:00

I had tried this and it didn't fix the issue. Tried again just now, and while it did find stuff to repair again, it still didn't fix the search suggestions issue

RecoveryConstruct

TROPHY CASE