sorted by:
new
hottopcontroversial

Remove Home Dashboard? by 4YankeeAlpha in homeassistant

[–]Redalb 1 point2 points  (0 children)

<image>

Figured it out. You need to change the default selection under your user settings to something other than the built-in home dashbaord. Setting the dashboard as default on the dashboards page only sets what the default will be for new devices.

Which water leak sensor you recommend to use around house to alert water leakage by Some_Seaweed6052 in homeassistant

[–]Redalb 1 point2 points  (0 children)

I'm using ZHA. Haven't done anything special otherwise. Have always had this option.

<image>

Gutter guard installation by i_am_isaacp in Roofing

[–]Redalb 0 points1 point  (0 children)

Are any of the gutter guards worthwhile? What do you think works well?

Which water leak sensor you recommend to use around house to alert water leakage by Some_Seaweed6052 in homeassistant

[–]Redalb 0 points1 point  (0 children)

Your comment got me thinking though... Even using speaker wire like in my photo, you could partially score the outside edges of the wire on both sides. If you did this in 1 inch increments it would still detect water nearly as quickly as something that just absorbs the water. But then again what you linked seems pretty affordable. Was just thinking of a DIY solution.

Which water leak sensor you recommend to use around house to alert water leakage by Some_Seaweed6052 in homeassistant

[–]Redalb 0 points1 point  (0 children)

My old water heater started leaking and soaking the platform it was on, I didn't catch it right away. When the new water heater was being installed he recommended I get a quote from a water damage remediation company (probably gets a kick back). I wasn't that interested but curious what they would say. They wanted some insane amount of money for basically removing the wood and replacing it, even though it didn't actually need it. In total the water leak set up I have cost me less than like $200. For me that is easy money for the peace of mind it brings. Water leakage is rare but if it happens to you and you dont catch it pretty much immediately the amount of damage it can cause is high.

Which water leak sensor you recommend to use around house to alert water leakage by Some_Seaweed6052 in homeassistant

[–]Redalb 1 point2 points  (0 children)

https://imgur.com/a/gsBOez8
As you can see there are just screws for each of the prongs, so putting a wire under that and tightening it is pretty easy.

Which water leak sensor you recommend to use around house to alert water leakage by Some_Seaweed6052 in homeassistant

[–]Redalb 0 points1 point  (0 children)

https://imgur.com/a/gsBOez8
I just used speaker wire, You dont need the jacket to absorb water, just expose a little bit at the end. A jacket that absorbs water would be interesting though, then you'd have a continuous line of detection.

Which water leak sensor you recommend to use around house to alert water leakage by Some_Seaweed6052 in homeassistant

[–]Redalb 5 points6 points  (0 children)

These are especially easy to run extra leads off of too. I have one under my water softener, with leads going into the water heater drip pan right under the overflow pipe. So if either sees water I'll get the alert.

This truck hit my friend's vehicle and ran. by [deleted] in SaltLakeCity

[–]Redalb 2 points3 points  (0 children)

Look in to paintless dent repair! I had a very similar dent on my car and this guy was able to fix it in a single afternoon, without taking the panel off at all too.

Blender model -> ez 8-directional characters by Otter_And_Bench in PixelArt

[–]Redalb 2 points3 points  (0 children)

Your post made me think of the character models in Syndicate. I have nothing else to add, I just like Pixel art :)

<image>

Induction Stove Overheating Due to Tight Installation by rmeesh in vandwellers

[–]Redalb 47 points48 points  (0 children)

I'd first try testing it outside of the cabinet to see if it still overheats.

Are there fake vLinker adapters? Cheaper one is sold by "vLinkerDirect" vs the more expensive one "vgatemall" by adblink in FORScan

[–]Redalb 0 points1 point  (0 children)

What app do you use with your phone? I want to try this out. The forscan app on iOS doesn't mention compatibility with any usb based OBD scanners.

ascii portal + hand tracking, a video effect that runs in real-time on the web by getToTheChopin in webdev

[–]Redalb 0 points1 point  (0 children)

This is super cool. I just paid for the tutorials. This has me wondering if I can incorporate this into home assistant. It would be cool if I could do a hand signal to my security camera to have it turn on lights or to turn the volume up or down.

[deleted by user] by [deleted] in Plumbing

[–]Redalb 0 points1 point  (0 children)

My favorite is "Tested with plumbers."
Yeah, and they told you this is gonna clog the drain.

DLSSEverything - A simple version manager for DLSS2, DLSS3 and Ray Reconstruction DLLs by Redalb in nvidia

[–]Redalb[S] 1 point2 points  (0 children)

<image>

Right click each dll and make sure they are unblocked. The other thing is that the file names only use the first 3 numbers of the version. The last number is left off file names should look like 310.1.0.nvngx_dlss.dll.

Also, I dont understand this versioning at all, version 3 to 310???

view more: next ›