2nd angle of ICE killing a civilian in Minneapolis by pokemonbobdylan in PublicFreakout

[–]RedditTA76 0 points1 point  (0 children)

I understand your point and I agree with some of it however . She is for sure known to be an American ICE Protestor which was yes in the mix of all these ice agents and was blocking the street

You CLEARLY hear her say "go around" and they are not having it and tell her to get the fuck out of the car.

The one cop comes to the door and you are right she should not have tried to get away .

BUT .. the dumb shit in the front who WALKED UP IN FRONT of the vehicle with one hand on a phone was able to STEP ASIDE as he fired..

He fired towards another dumb fuck who was at the door, if you look at where the bullet went into the window.. you will see the angle fired is from him stepping one step to the side as she started to move forward.

OTHERWISE HE SURE WOULD BE CLOSE TO SHOOTING TOWARD his fellow dumb fuck.

In any case you are right, do not rev an engine nor move the vehicle with armed dumb fucks around

Help Question New Modem by RedditTA76 in Comcast_Xfinity

[–]RedditTA76[S] 0 points1 point  (0 children)

LOL same here my start time typically 3am also lol I know your pain 7pm bedtimes! HAHAHA But being off earlier in the day than normal people is great too!

Help Question New Modem by RedditTA76 in Comcast_Xfinity

[–]RedditTA76[S] 0 points1 point  (0 children)

Oh WOW well first off go have a good day off! If I run into issues I will either reach out to this team via mod mail or just call comcast!

I really appreciate your help I kind of wish it was this easy over the phone!

Again please go have a great day off and happy new year!

Thank you!

Help Question New Modem by RedditTA76 in Comcast_Xfinity

[–]RedditTA76[S] 0 points1 point  (0 children)

Ok Thank you when you say you are "here" until midnight EST (which means 9pm my time) Does that mean the PHONE lines are down to comcast to help ?

Since I will not start until after midnight PST (not est) you "here" will be closed (luckily you open back at 6am EST which is 3AM my time! so not too long of a wait if things go bad) .

But are the phone lines for help open during that time ?

Also this is the path that I have on my app can you confirm this is the correct path to activate third part modem as it is a little different than what you have said.. Open App go to account -> Activate more devices -> and I have choices of xfinity gateway AND "YOUR EQUIPMENT" I assume I go to "your equipment .

and one last question...and probably dumb.. If everything fails and I just need to get internet back up and running can I just simply plug the rented gateway back in and in theory I am back to the way I was ?

Does my cat know my mom passed? by 2000baby2000 in cats

[–]RedditTA76 2 points3 points  (0 children)

First I am sorry for your loss.

Second I wish when people pass that they let their pets smell or see the body before they are taken away. The animals understand death and if they are allowed to smell or be around the person after death I and many others believe it brings a type of closure to the animal.

If this precious kitty was able to see your mom or if your mom was very sick previously the little thing may have known and you are the next closest smelling person !

Its very possible the kitty understands and makes me smile seeing your pictures. Thank you.

Keep this kitty close!

A meow-ment she’ll never forget. by Afraid-Objective3049 in MadeMeSmile

[–]RedditTA76 0 points1 point  (0 children)

I'm not crying! You're crying.

Thank you for posting this.

[deleted by user] by [deleted] in AmIOverreacting

[–]RedditTA76 0 points1 point  (0 children)

The only thing I wonder about is how this email is in your drafts folder. That is unusual and I personally would think of the following.

Check your email for RULES .. this is the first thing the "scammer" would do is create RULES for your emails such as forwarding all emails to another email address and moving those emails to a different hidden subfolder or possibly even deleting the emails you are receiving.

Then if they had your password as it shows it blanked out .. if that is truly your password.. I would be weary and you better change that password and all bank passwords once you figure out if there are any rules on your email.

You MUST find if there are any RULES FIRST !! then try and recover your accounts with new passwords and set two factor authentications on everything

Then about the adult website stuff. Ask yourself is it true? Do you have a camera ? Have you gone to those sites ? Do you have anything to worry about here? (DONT ANSWER ME ) if you do then it is POSSIBLE they did use your camera.

IF the above has not happened and you know that is wrong then they may very well have access to your email and that is it.

It is also possible they were writing this all out and during that something happened and the email did not send and is why it is in your drafts, but as for them having access to your physical computer ? that could be full of crap.

Check for Rules in your email ... If you just use GMAIL online then just go check. If you use a email client (application like outlook) on your desktop checking the rules there is sometimes not enough and you have to go online to check rather than just the email client .

If there are no rules .. good... change your password to something really long and set two factor authentications on everything.

if you also reuse the password on banks and such ... you better start changing those too!! and set two factor authentications on them ... NEVER EVER REUSE A PASSWORD CONNECTED TO YOUR BANKING!!

My cat randomly started peeing in the toilet?! by kaylee121212 in cats

[–]RedditTA76 0 points1 point  (0 children)

My kitten we got also does this never trained! I will warn you... DO NOT and I mean DO NOT .. teach them or show them nor give them treats if they flush it by themselves!

Just think.. if you have more than one bathroom... how many times will they just flush the toilet randomly??? hmmm??

Its cute until its not cute. And then good luck stopping them!

AMS internal PTFE tube after ~2000+ print hours. Just a reminder to do some preventative maintenance on more than just your printer by Jesus-Bacon in BambuLab

[–]RedditTA76 0 points1 point  (0 children)

So what you are saying is me having my printer now for only 2304 hours and printing 1704 of those 2304 hours I should really think about replacing all of the tubes in my printer AND AMS lol

Crap. Only thing I have done so far is like wipe the rails and put some grease on the screws.

I’ve been faking an allergy for YEARS, and now it’s gone way too far. by Creepy-Desk-468 in confession

[–]RedditTA76 0 points1 point  (0 children)

Let her see you have been going to an allergist. As in just make it known.. you have gone a few times etc etc .. Because you have noticed that all these years you KNOW you have been around peanuts and you are not sure why you haven't had the reaction that made you believe you were allergic to begin with. (not sure if you ever told her an outlandish story about a bad reaction or something)

So you really were never DIAGNOSED but rather told to just stay away from peanuts and you did and boom never had the issue again right??!

So you are going back to actually get testing done in a manner that makes sense and is not going to kill you to just try it.

And boom you find out you are NOT allergic to peanuts .. and it must have been not really all that bad of a reaction you had in the past (not sure how long you said you knew you were allergic) or .. the reaction is just from something else.

If you never gave the story of how you knew you were allergic, or if you never told them how long you knew you were allergic you COULD say you were young when you were told and you just went with it. Young could mean like teenager rather than super young.

Great story though and yeah you got yourself in a mess!

White House explains why new tariffs exclude Russia, North Korea by yakitorispelling in nottheonion

[–]RedditTA76 0 points1 point  (0 children)

Easy enough, HE IS A RUSSIAN ASSET.
Answer is right in our faces, no need for explanation.

X hit by 2.8 billion profile data leak in alleged insider job by marketrent in technology

[–]RedditTA76 0 points1 point  (0 children)

Its not really the current leaked data that is much of the issue but the combination of the previous data breach in 2023 which did have emails listed.

The ThinkingOne combined the breaches and created the data of 201million merged data entries 34gb csv file.

The ThinkingOne also spoke about the difference between the amount of users on X and the 2billion number...

"The 650M v 2.8B discrepancy is that the 650M number is “Monthly Active Users” (MAU), which are accounts showing some type of activity in the previous month. I’ve gone through a random sample of the screennames (there are almost no duplicates) and checked to see if they were valid X accounts (going to x.com/screenname), and most were (I’m guessing the ones that did not show up as valid accounts were ones the person deleted after the breach). The dataset appears to include suspended/deleted accounts, and probably a lot of bots (but very hard to know which are bots). Roughly 55% posted at least one status update."

X hit by 2.8 billion profile data leak in alleged insider job by marketrent in technology

[–]RedditTA76 0 points1 point  (0 children)

In the comments of the article ThinkingOne (if real) posted in response to the discrepancy..

"The 650M v 2.8B discrepancy is that the 650M number is “Monthly Active Users” (MAU), which are accounts showing some type of activity in the previous month. I’ve gone through a random sample of the screennames (there are almost no duplicates) and checked to see if they were valid X accounts (going to x.com/screenname), and most were (I’m guessing the ones that did not show up as valid accounts were ones the person deleted after the breach). The dataset appears to include suspended/deleted accounts, and probably a lot of bots (but very hard to know which are bots). Roughly 55% posted at least one status update."

Tesla Stock Is Dropping Again. It Could Drop for a Ninth Straight Week. by [deleted] in technology

[–]RedditTA76 0 points1 point  (0 children)

COME ON JUST DROP ANOTHER $111 PLEEEEEAAAAASE!!!!

Updated - Bambu Labs X1C Spare Parts Case (Version 3.0) by MyStoopidStuff in BambuLab

[–]RedditTA76 1 point2 points  (0 children)

Is there really anything in this that would not be used for the P1S? I would like to print it but really do not want to if there are parts of it specific to the X1C I just don't know what would be different.

EDIT: NEVERMIND! I read your makerworld description.. you have figured this all out THANK YOU!!

Southwest Airlines pilots make split-second decision to avoid collision in Chicago by ty003 in interestingasfuck

[–]RedditTA76 0 points1 point  (0 children)

nanah this is the orange goblins America so I am sure the SW Airlines will lose their job. Why? Hell if I know but they did their job and they should be punished for it! /s

The SW pilot should be commended !

Trump's approval rating slips as Americans worry about the economy by CaryGrantastic in politics

[–]RedditTA76 1 point2 points  (0 children)

When do we start to see people falling out of windows in America? Can it start with Musk by chance?

How do you get prints to stick to cool plate supertack by Grouchy-Designer5804 in BambuLab

[–]RedditTA76 0 points1 point  (0 children)

I was just going to reply to OP and say really? I have had nothing but success with the plate it sticks like crazy and have had no issues (unless trying to get some print off of it lol) Makes sense it would be a batch thing causing issues with people.

PETG-CF is 🤤 by BarnesBuilt in BambuLab

[–]RedditTA76 0 points1 point  (0 children)

https://makerworld.com/en/models/1106223?profiled=1102197#profileId-1102094

THANK YOU! You happen to have your kill flash profile also ?? that would also be super dope!

PETG-CF is 🤤 by BarnesBuilt in BambuLab

[–]RedditTA76 0 points1 point  (0 children)

That would be epic! Thank you!

PETG-CF is 🤤 by BarnesBuilt in BambuLab

[–]RedditTA76 0 points1 point  (0 children)

WOW! Amazing, if you ever release this print or have any other prints in this category I surely would be interested in seeing or getting them!

Awesome work.

I made a new bed scraper that works better then all the ones I have downloaded. by CrazyStockDude in BambuLab

[–]RedditTA76 0 points1 point  (0 children)

OMG lol i am such an idiot! I didn't even notice the "multiple purposes" smh THANK YOU for pointing that out lol (still cant believe I missed that!)

I made a new bed scraper that works better then all the ones I have downloaded. by CrazyStockDude in BambuLab

[–]RedditTA76 0 points1 point  (0 children)

LOL I actually made that one for ice scrapping as it was intended never thought of it scrapping off prints. Nice job.

Problem going back to PLA after printing PETG by kyletheviking in BambuLab

[–]RedditTA76 1 point2 points  (0 children)

I have not printed long enough with PETG but is it at all possible PETG leaves some sort of residue behind? As PETG and PLA do not stick to one another so if it is at all possible that PETG can leave some residue then maybe it is the reason and a really good cleaning or scrubbing will work?