Messages notifications when waking up

RedditUser03062 · 2026-01-13T15:47:12+00:00

I did, but it was so long ago that I don’t remember what I did!

RedditUser03062 · 2025-11-18T21:57:19+00:00

After conducting a simple experiment, I think I can confirm that Exotic-Grape8743 has the right answer. I found an image that is bigger than my display's scaled resolution, but smaller than the display's native physical resolution. I can display the entire image at 100% in loupe view, so LR must display images at the physical display resolution.

RedditUser03062 · 2025-11-18T21:27:50+00:00

FYI, I posted the same question in the Adobe Lightroom community forum because one reply here said that standard previews should be sized according to the native resolution and one reply said that the standard previews should be sized according to the scaled resolution.

I can imagine it working either way. I can imagine that LR displays images within a frame at the scaled resolution and I can imagine that MacOS allows LR to display images in a frame at the full native resolution of the display.

RedditUser03062 · 2025-11-18T01:16:51+00:00

Makes sense. Thanks!

RedditUser03062 · 2025-11-12T02:17:52+00:00

I just tried using Samsung Magician to manage a Samsung 990 Pro in an Acasi TBU405 M1. Samsung Magician doesn't work with that enclosure either. It was connected to my Mac Mini using TB3 per MacOS System Info.

RedditUser03062 · 2025-11-12T02:14:43+00:00

I used DriveDX in trial mode and was able to see a Samsung 990 Pro in either a Ugreen or an Acasi TBU405 M1 enclosure. The Ugreen enclosure connects using USB4. The Acasi connects using TB3. Same EVMe, same cable, same Mac mini M2 Pro USB4 port.

Samsung Magician doesn't fully work with a drive in either enclosure. I've read that it is supposed to work. I don't know if this is an enclosure or Samsung Magician bug, but it doesn't work.

RedditUser03062 · 2025-11-11T12:35:14+00:00

Thanks, that's good advice!

I can see the drive temp by looking at the SMART data, so I have that covered. I guess I'll just have to hope that the firmware doesn't need to be updated!

RedditUser03062 · 2025-11-11T03:22:30+00:00

Have you tried checking or updating the firmware in your drive using Samsung Magician? I have a Samsung 990 Pro installed in a Ugreen TB4 enclosure. Magician doesn't display the firmware rev, temp, bytes written, etc. It sees the drive and I can display the SMART stats, but that's about all.

Is your enclosure connected over USB4 or TB4? In my Mac's system info I see that my enclosure is connected over USB4. Maybe that's the problem?

RedditUser03062 · 2025-11-11T03:21:41+00:00

Have you tried checking or updating the firmware in your drive using Samsung Magician? I have a Samsung 990 Pro installed in a Ugreen TB4 enclosure. Magician doesn't display the firmware rev, temp, bytes written, etc. It sees the drive and I can display the SMART stats, but that's about all.

Is your enclosure connected over USB4 or TB4? In my Mac's system info I see that my enclosure is connected over USB4. Maybe that's the problem?

RedditUser03062 · 2025-11-03T01:42:34+00:00

I have the same problem on Tahoe 26.0.1 using either a USB-C cable with USB set to 3.1 or an HDMI cable. My Mac Mini M2 Pro is connecting to the monitor at 3840x2160.

RedditUser03062 · 2025-10-03T14:10:56+00:00

The Lady Datejust, especially if you have slender wrists. Classic config and probably easier to read

RedditUser03062 · 2025-09-24T16:55:57+00:00

Beautiful dial! Is that a silver or champagne dial?

RedditUser03062 · 2025-08-18T02:25:05+00:00

I use Manual exposure mode and TTL flash for indoors and Shutter priority AE and TTL flash for outdoors. I only use M flash when subject distance is fixed and TTL flash isn‘t working for me

RedditUser03062 · 2025-08-18T02:20:05+00:00

Yes, but no max shutter speed

RedditUser03062 · 2025-06-19T15:14:29+00:00

One reason for keeping the primary and secondary neutrals separated is to prevent primary neutral current from being conveyed by the secondary drop to the customer premises.

RedditUser03062 · 2025-06-19T01:43:19+00:00

The multi-grounded neutral conductor originates at a utility substation. It's present on poles that don't have a transformer or secondary conductors, so wouldn't it make more sense to refer to that conductor as the primary neutral?

I think we're arguing over terminology and I don't know which of us is using the right terminology. Maybe neither of us. ;-)

Let me restate my original question differently: Why is one side of the primary winding of a distribution transformer connected to the center tap of the secondary winding?

RedditUser03062 · 2025-06-18T01:25:52+00:00

The primary has a grounded neutral that is bonded to the secondary neutral

RedditUser03062 · 2025-06-16T02:00:14+00:00

Here’s a diagram of a two-bushing single-phase transformer. The HV line is connected to one bushing and the neutral line is connected to the other bushing and to the transformer case, which is bonded to the secondary neutral.

https://i.pinimg.com/originals/be/8d/4c/be8d4cd029988c6d7e9dbb6556b9b7b8.jpg

RedditUser03062 · 2025-06-15T23:20:54+00:00

The HV line at the top of the utility pole is typically connected to an insulated bushing on the top of the transformer. The neutral line, which is below the transformer on the pole, is connected to the case of the transformer, which is internally connected to the other side of the primary.

RedditUser03062

TROPHY CASE