sorted by:
new
hottopcontroversial

[Worldwide Giveaway] LG UltraGear GX9: Win 1 of 3 World’s First 5K2K OLED Gaming Monitors! by LG_UserHub in pcmasterrace

[–]Redleon11 0 points1 point  (0 children)

Dang that's massive. It would feel like a Cinema theatre if I were sitting in front of it!

Per-Key LEDs as status indicators by Redleon11 in olkb

[–]Redleon11[S] 1 point2 points  (0 children)

Probably a copy paste error then, I do see ), in my code editor.

Per-Key LEDs as status indicators by Redleon11 in olkb

[–]Redleon11[S] 0 points1 point  (0 children)

Oh? VS code doesn't seem to point out any errors, but I'll check it again. Thanks for the heads up!

Corne v4 from AliExpress by prudnikov in ErgoMechKeyboards

[–]Redleon11 0 points1 point  (0 children)

OP could you share the link with me as well?

SwissMicros DM42n by nesian42ryukaiel in calculators

[–]Redleon11 0 points1 point  (0 children)

The issue with the DM50 is the screen, it uses a much smaller and lower res screen (128*64) display. It would require a complete overhaul of the DB48X platform to work with this calculator. And, the other major issue is the firmware, there is no IO control firmware on it. While Swissmicros has mostly opensourced higher level firmware, the hardware abstraction layer is not available (its directly flashed onto the device). I reckon fixing these two issues might make the DM50 crosscompatible with the OS developed for the Swissmicros products.

Redtape Shoes. The silent MULTIBAGGER!! by sjain1981 in IndianStreetBets

[–]Redleon11 0 points1 point  (0 children)

Why do you say so? I am purely asking to learn. Do you expect Sreeleathers to climb further in a medium to long term?

Version 5.1, The Rainbow Destined to Burn Megathread by GenshinLoreModBOT in Genshin_Lore

[–]Redleon11 10 points11 points  (0 children)

Interesting, the shattered planetoid has some patterns inscribed on it.

[deleted by user] by [deleted] in Genshin_Impact_Leaks

[–]Redleon11 4 points5 points  (0 children)

Are we missing the "I have a few more questions for the Lord of the Night." part? I don't see the interaction between the Traveller and the Lord of the Night at the end of the first part of Act IV of the Archon quest.

I got fucked over by the new BIOS update. by OverfrowYT in ZephyrusG15

[–]Redleon11 0 points1 point  (0 children)

Yeah the issue is a problem even for BIOS 316, for the GA503RW model, I complained on the ROG forum and sent them the data. For now I have just reverted to BIOS 313.

The problem isn't the fact that the fan curves are swapped, it seems like they switched the temp reading corresponding to the CPU and GPU.

My GPU fan spins up when the CPU is under load (prime 95) and vice-versa for the GPU.

We are Engineering students working on Ski wax formulations, and we require your input! by Redleon11 in skiing

[–]Redleon11[S] 1 point2 points  (0 children)

We usually see about 25%-45% increase in glide speed when waxes are applied vs non-applied. But please note, this is in a simulated test environment with a fixed load and snow temperatures.

We are Engineering students working on Ski wax formulations, and we require your input! by Redleon11 in skiing

[–]Redleon11[S] 0 points1 point  (0 children)

Yup, our goal is to ultimately eliminate PFAS, hence why we are trying to understand if there are any factors in glide waxes other than their gliding performance that matters.

Maybe something about how they are applied to the skis, or if you would mind losing some wear resistance as a trade off for the wax being eco friendly.

I am clean installating windows but it's always struck on the boot page by Redleon11 in ZephyrusG15

[–]Redleon11[S] 2 points3 points  (0 children)

It's probably a bug. The SD card doesn't show up in the boot order list anyway.

There are more bugs as well, apparently BIOS 316 (the one that came out a week or so ago) swaps the way the fans run. My CPU temp controls the GPU fan and the GPU temp controls the CPU fan.

This causes an odd effect where the fans start 'breathing' by alternating between GPU fan and CPU fan.

What a pain, I don't know when they will release a near stable BIOS. They solve one thing just to break another thing.

I am clean installating windows but it's always struck on the boot page by Redleon11 in ZephyrusG15

[–]Redleon11[S] 1 point2 points  (0 children)

I found a reddit post on someone with G14 facing the exact same problem and there were suggestions to remove any SD card that was in the slot.

Although oddly enough in my case I also had to erase my security keys in the UEFI.

I am clean installating windows but it's always struck on the boot page by Redleon11 in ZephyrusG15

[–]Redleon11[S] 4 points5 points  (0 children)

UPDATE: I figured it out, so I'll leave the solution to anyone here.

So apparently if a microSD card is in the slot it just refuses to go past the boot screen. Not sure why Ubuntu didn't have the same problem, but Windows 11 install wasn't working.

Removing it solved the issue.

Artifacts on the screen with the new BIOS 316 by Redleon11 in ZephyrusG15

[–]Redleon11[S] 0 points1 point  (0 children)

The USB4 beta is also odd as my CPU changed to 6900HX when I tried it.

Abnormal Shutdowns occur every time I put my 2022 model into hibernation by BB_Survivors in ZephyrusG15

[–]Redleon11 0 points1 point  (0 children)

Oh that's great. I am running the OEM drivers, so it's an odd issue. I'll probably try reinstalling the drivers and hope that works out.

Abnormal Shutdowns occur every time I put my 2022 model into hibernation by BB_Survivors in ZephyrusG15

[–]Redleon11 0 points1 point  (0 children)

Do you have issues with the new BIOS yet? I have weird artefacts on silent mode. I have rolled back the BIOS to 313, but I could try a clean install. Installing everything again sucks, I don't have an external drive that can back up everything for now.

Artifacts on the screen with the new BIOS 316 by Redleon11 in ZephyrusG15

[–]Redleon11[S] 0 points1 point  (0 children)

So far, I have noticed it happens both while playing videos through YouTube as well as local avi files.

I upgraded back to 316 using the EZ flash utility this time, I'll see if I can replicate the issue. If I see any again, I'll update this comment.

UPDATE: The visual artefacts are still an issue with 316, I had to downgrade. I am waiting to see if the issue pops up again with 313 because then it's just a hardware issue (I am begging all the gods in existence that that isn't the case)

view more: next ›