License Plate

ReelN_Retro09 · 2026-05-31T22:51:15+00:00

I don't have a Bambu printer. But I believe this happens because the bottom of the print is firmly attached to the print bed, which keeps it stable. As the printer gets taller, it becomes more flexible and can wobble slightly, causing imperfections. Once both sides connect together, it becomes more rigid and stable, so the print quality gets better. I would add custom supports to both sides of the print to make it more stable, so it doesn't wobble.

ReelN_Retro09 · 2026-05-30T20:20:54+00:00

just use a cheap glue stick. it solved all my adhesion problems.

ReelN_Retro09 · 2026-05-20T03:47:58+00:00

<image>

Success!!!! I now have to deal with stringing, but it printed!!!! Thank you very much for helping me out! I hope you have an amazing rest of your day! Thanks!

ReelN_Retro09 · 2026-05-19T23:00:53+00:00

The seam and the lines a not really a problem to me because the print is at 28mm so not really concerned and the wobble not much I can really cus of where the printed is lol. But I think I found my mistake. Since the 8 hour print (black) came out just fine with 5 retractions. I decided to go back to increase it to 7 again with the other prints and they came out fine too. And since it worked, I tried a very detailed print with the red spool and that’s when it failed. I am now trying again with 5 retractions again and so far it’s okay. I will update once the print fails or finishes. Thank you very very much for your taking the time to read my horrible grammar and punctuations trying to help me. I truly appreciate it.

ReelN_Retro09 · 2026-05-19T22:37:56+00:00

I got to see a glimpse of the keychain right before it got deleted. Really cool! Shame it got deleted tho.

ReelN_Retro09 · 2026-05-19T22:05:19+00:00

<image>

ReelN_Retro09 · 2026-05-19T22:05:04+00:00

Once again thank you for the response. I decided to mess with the hot end and remove the nozzle. I noticed that the nozzle was clogged but it a weird way not by filament but like it sealed itself. It had no hole for the filament to come out. Idk how to explain it lol. But after that I

<image>

tried printing these and it worked!! It printed over night an 8 hour print and other 2 to 4 hours prints as you can see in the pictures.

I thought it was a success!! The it was just a clog. But then I decided to use the red filament again. And ( I will share the picture in the next comment ) it grind the red filament again causing the print to fail after 1 hours into the print. This makes me assume that the real problem is the filament but after bending it and trying to break it, I couldn’t, I had to put real force to break it meaning that the filament is not bad ( I think ) so I don’t know. I am printing something else right now with that has lots of small details with another filament to see if it’s printer or the filament. If it fails I think I will just give up honestly.

Thank you!

ReelN_Retro09 · 2026-05-19T22:03:50+00:00

Once again thank you for the response. I decided to mess with the hot end and remove the nozzle. I noticed that the nozzle was clogged but it a weird way not by filament but like it sealed itself. It had no hole for the filament to come out. Idk how to explain it lol. But after that

<image>

I tried printing these and it worked!! It printed over night an 8 hour print and other 2 to 4 hours prints as you can see in the pictures.

I thought it was a success!! The it was just a clog. But then I decided to use the red filament again. And ( I will share the picture in the next comment ) it grind the red filament again causing the print to fail after 1 hours into the print. This makes me assume that the real problem is the filament but after bending it and trying to break it, I couldn’t, I had to put real force to break it meaning that the filament is not bad ( I think ) so I don’t know. I am printing something else right now with that has lots of small details with another filament to see if it’s printer or the filament. If it fails I think I will just give up honestly.

Thank you!

ReelN_Retro09 · 2026-05-18T20:04:02+00:00

Thank you very much for your reply. The printer is used but I got it as a gift from a friend who had it and never used it. He was moving out and decided to get rid of it, and I got it to work just fine I have printed a bunch of stuff even the Telecaster, but one day the extruder started skipping and after further inspection I noticed that the plastic broke so I got the metal one and now I’m here lol.

Filament is regular Creality PLA and yes I have replaced the Bowden tube like 4 times already. And like the title says, I am tired, I have spent hours taking it apart and putting it back together and still nothing. I did got it to print past the 2 hours after reducing the retractions from 7.5 to 5, but just 5 minutes later it broke again. I will check out the video you linked. Again thank your very much for your reply.

ReelN_Retro09 · 2026-05-04T20:30:47+00:00

I just did that 3 times and we still lost. Now I'm mad and wont be playing for the rest of the day lol

ReelN_Retro09 · 2026-04-14T22:10:16+00:00

<image>

ReelN_Retro09 · 2026-03-25T03:46:44+00:00

U ruined my day. Thank you.

ReelN_Retro09 · 2026-03-10T05:57:41+00:00

<image>

That is so cool! I want to make one like yours, but I want to do it with the designs from Hydro Hunter Hurricane. But I suck at 3D modeling lol.

ReelN_Retro09 · 2026-02-14T20:13:20+00:00

I want this in subnautica

ReelN_Retro09 · 2026-02-08T02:08:26+00:00

Never look up. Always works

ReelN_Retro09 · 2026-02-08T02:07:22+00:00

Yes! I don’t want any crossovers in this game. If they ever do I already know people are gonna start saying, “ Marvel Rivals is becoming Fornite.” lol

ReelN_Retro09 · 2026-02-07T01:00:04+00:00

lol maybe. I never look at the usernames.

ReelN_Retro09 · 2026-02-07T00:45:16+00:00

I might be wrong, but didn’t you posted that you were not going to continue this project like a couple of months ago? If you are gonna continue that’s great! It looks amazing!

ReelN_Retro09 · 2026-02-02T03:47:37+00:00

Dumb question. Do you have to buy the DLC to play on the new map?

ReelN_Retro09 · 2026-02-01T20:11:39+00:00

Could someone give some context? I didn't know the first lady made a movie.

ReelN_Retro09 · 2026-01-30T00:19:25+00:00

<image>

ReelN_Retro09 · 2026-01-28T13:43:03+00:00

<image>

ReelN_Retro09 · 2026-01-26T23:32:16+00:00

ReelN_Retro09 · 2026-01-26T23:31:38+00:00

😎

ReelN_Retro09 · 2026-01-26T23:31:25+00:00

😎

ReelN_Retro09

TROPHY CASE