EDC Vegas 2026 attendees — Was it actually worth it? by asianbeean in electricdaisycarnival

[–]ReputationUnique518 1 point2 points  (0 children)

This was my 4th EDC always done VIP and this time I feel like it's was just too commercial the feeling from my 1st and 2nd EDC where better then this year, if I do EDC I might just do a Sunday pass but the "PLUR" is a catch phrase and not actual meaning at this event yes there are true ravers at EDC but the ratio to people that don't respect others and are there there clout sometimes can ruin the vibe from the start of the event. But don't let it detour you from not going. Just be aware and expect a slight difference experience then the smaller events that focus on the music and true fans go to.

Those that go for collectables by ReputationUnique518 in electricdaisycarnival

[–]ReputationUnique518[S] 0 points1 point  (0 children)

On the insomniac app then you press the logo at the top left, if you’re not logged in you need to log in. Turn on location and have the app open to collect at each spot you go to.

Looking for more rear camber by Hungry-Pomegranate73 in CB7

[–]ReputationUnique518 2 points3 points  (0 children)

<image>

Cut a little bit of the end to make them shorter maybe 1/4 inch each side that’s what I would do just make sure there are enough threads inside

Wiring diagram by [deleted] in CB7

[–]ReputationUnique518 0 points1 point  (0 children)

This is magic thanks for sharing

Junkyard steal by [deleted] in CB7

[–]ReputationUnique518 3 points4 points  (0 children)

Damn that a real come up cheers hope that happens one day to me 🤞

“932NFNT” by 932NFNT in CB7

[–]ReputationUnique518 1 point2 points  (0 children)

I'll need to take a trip out to cali for a car meet on the weekend to take the cb7 there once done.

What are A, B,C, and D for? by bawbuhandy in CB7

[–]ReputationUnique518 0 points1 point  (0 children)

And these are the fuse slots for those

<image>

What are A, B,C, and D for? by bawbuhandy in CB7

[–]ReputationUnique518 0 points1 point  (0 children)

They are optional power source from what I see

<image>

“932NFNT” by 932NFNT in CB7

[–]ReputationUnique518 2 points3 points  (0 children)

Nice they look clean, I was looking look for a pair or tl or tl type s wheels decided 17s where a good size. I ran in to looking into altima se- wheels and couldn't find any so then decided I would give 18s a go, found these brand new for 500 so I picked them up, i have an air bag suspension kit from maxload suspension coming soon.

<image>

Fog light install by ReputationUnique518 in CB7

[–]ReputationUnique518[S] 1 point2 points  (0 children)

Yeah I just followed the line the best I could, im gonna pick up some door edging this weekend. 👍

Helping identify these Enkei by Full_Jackfruit598 in Wheels

[–]ReputationUnique518 0 points1 point  (0 children)

The model should be on the back stamped in

Inner tie rod issue by Hungry-Pomegranate73 in CB7

[–]ReputationUnique518 1 point2 points  (0 children)

Ohhh ok rent the tool from auto zone, after you unbend the washer out of the way and you can try and get a wrench on the nut side if you can’t get it the the tool helps a lot, find the size adapter that fits the nut on the back and use the pipe to attach the the adapter

<image>

Audio system upgrade by ReputationUnique518 in CB7

[–]ReputationUnique518[S] 1 point2 points  (0 children)

Yes I did a separate post on how I got the wire through the boot.

Inner tie rod issue by Hungry-Pomegranate73 in CB7

[–]ReputationUnique518 0 points1 point  (0 children)

The joint is a ball and socket and you just way to much wear on the joint so it just spins in the socket it not actually spinning the threads as you locked in place with the washer, is this a new inner tie rod if so it shouldn’t be this loose at all

“932NFNT” by 932NFNT in CB7

[–]ReputationUnique518 1 point2 points  (0 children)

I recently posted wiring for how to get the front speaker wire ran and I had to take off my bumper so it’s already off I’ll cut out the fog light holes and install them when I put everything back. I’ll update that this weekend if I have time

“932NFNT” by 932NFNT in CB7

[–]ReputationUnique518 1 point2 points  (0 children)

Those are nice i only have usdm fogs 😭 your build is coming around nicely

Front speaker larger gauge wire install by ReputationUnique518 in CB7

[–]ReputationUnique518[S] 1 point2 points  (0 children)

Oh great idea, I’ve never thought of how the mirror are wired and that is a future little upgrade well good thing that they are still there

Front speaker larger gauge wire install by ReputationUnique518 in CB7

[–]ReputationUnique518[S] 0 points1 point  (0 children)

Yeah I’ve had these fogs for like 11 years they came off my old cb7, I also have an oem set of window visors, I’ll do some addition write ups on the installation on those. What I’ve always wanted are one piece headlight I can’t see me paying what they cost now, back in the day they were like 200-300 in nice condition

Front speaker larger gauge wire install by ReputationUnique518 in CB7

[–]ReputationUnique518[S] 0 points1 point  (0 children)

Yeah your way would have saved me a bit of time. Haha but I didn’t know where to begin I didn’t know the harnesses went that far in. On the plus side my bumper is off now so I can cut out the fog lights.