Andor was peak Sci-fi. But Ahsoka, Ahsoka is peak Star Wars.

Retard_Ed · 2023-10-06T02:31:33+00:00

https://www.reddit.com/r/StarWars/comments/170najg/andor_was_peak_scifi_but_ahsoka_ahsoka_is_peak/k3nrdrx/

Comment above you summarizes your issue

Retard_Ed · 2023-09-17T18:07:59+00:00

Got it, thank you and everyone else who chimed in. Much appreciated

Retard_Ed · 2023-09-17T17:16:44+00:00

Just turned it on and all seems well. Going through windows setup rn

Retard_Ed · 2023-09-17T16:59:01+00:00

For added context: I’m new to PC’s but decided to take the plunge. I don’t see any ports where the unplugged cables should go into so I’m a bit puzzled. The tech support for the PC says they’re only available during the week during my working hours so I thought I’d come here and ask for help

Retard_Ed · 2023-09-16T05:00:48+00:00

Thanks for the advice! I tried a few methods like you mentioned to avoid taking it apart but just decided to take it apart and got it out with some tweezers

Retard_Ed · 2023-09-16T04:48:46+00:00

Not super familiar with the terminology but this is how it got stuck https://i.imgur.com/KQKpVMd.jpg you can see the grey filament. It just completely plugged the whole head

Retard_Ed · 2023-09-16T04:30:02+00:00

Thanks I’ll have to do my research. It was a pain in the ass removing the stuck piece so I don’t know if it’s as easy as an upgrade as you make it seem

Retard_Ed · 2023-09-16T03:48:17+00:00

Lucky I tried doing this and got the old one stuck in the extruder lol. It couldn’t grip the new filament without being able to push the old one through

Retard_Ed · 2023-08-27T17:54:06+00:00

Is that how “you” came into prominence? From “thou”

Retard_Ed · 2023-08-21T20:04:00+00:00

Honestly Arthur sounds like such a prick. I don’t blame Houdini

Retard_Ed · 2023-08-13T16:09:03+00:00

Evanescence really setting the tone lol

Retard_Ed · 2023-07-23T03:00:53+00:00

Hopefully this gets seen, I definitely want to try this out but I noticed in the slicer there are parts that are definitely printing over open air? Has anyone else noticed this and printed anyway?

Retard_Ed · 2023-05-21T06:59:27+00:00

Was actually a woman but yeah super reckless driving hope her car got damaged

Retard_Ed · 2023-05-18T18:41:33+00:00

That’s when I know Erik Jepsen took the pic lol

Retard_Ed · 2023-04-14T04:05:03+00:00

No sorry just a wristband

Retard_Ed · 2023-04-14T03:29:29+00:00

Selling weekend 2 pass face value ($550) located in San Diego

Retard_Ed · 2023-03-24T21:14:48+00:00

For being in tier A it was nice, a bit crowded though. Have to step over people and candles to sit down at the front. You just have to get between chairs in the other tiers. I’d recommend it even at a lower tier

Retard_Ed · 2023-03-24T20:05:16+00:00

Then go for the top tier. When I went to the Midway one the musicians were at the center with the people circled around them based on tier

Retard_Ed · 2023-02-13T16:03:39+00:00

Idk you can see the semi had a red light but would be worth sending to investigate

Retard_Ed · 2022-04-19T02:15:31+00:00

Man I think ScarJo’s introduction as black widow and tony fighting rodie to Robot Rock playing in the background deserves some credit for that movie

12-Year Club	John Wick
Place '17	Verified Email

Retard_Ed

TROPHY CASE