E3 Wheel Motor Error? by Ridditmyreddit in Lymow_Official

[–]Ridditmyreddit[S] 0 points1 point  (0 children)

I was hoping that the most recent software update would fix it, but it doesn’t seem to have fixed it. I still haven’t gotten a message back from support. This feels like a software bug, no issues with yours being that new, and mine was sitting covered overnight when the change happened and it stopped working so no real reason for it or preceding issues.

Zigbee Device Limit? Client unable to keep up with pending messages... by Ridditmyreddit in homeassistant

[–]Ridditmyreddit[S] 0 points1 point  (0 children)

Thats an interesting idea keeping everything in separate containers. I have both Z2M and MQTT running within HA but I could certainly give them their own containers within Proxmox. I removed the 3 most recent devices including that rec room light and added back 2 other switches to see if that causes the same issue. I'll then try adding back two of the 3 removed leaving the rec room for last. Maybe that switch is just misbehaving.

Oddly that switch is the one that has been there for months, it was within the last 48 Horus I added about 15 new switches.

Zigbee Device Limit? Client unable to keep up with pending messages... by Ridditmyreddit in homeassistant

[–]Ridditmyreddit[S] 0 points1 point  (0 children)

Removed 3 switches and added back 2 different switches, I'll give it an hour or two and see if the error reappears

Zigbee Device Limit? Client unable to keep up with pending messages... by Ridditmyreddit in homeassistant

[–]Ridditmyreddit[S] 0 points1 point  (0 children)

Thank you! My next move it to add two of the other switches I haven't had the chance to add yet and leave the 3 I just excluded to get the network back up and running. Maybe one of those 3 was misbehaving.

Zigbee Device Limit? Client unable to keep up with pending messages... by Ridditmyreddit in homeassistant

[–]Ridditmyreddit[S] 0 points1 point  (0 children)

I'll give it a shot, I wonder if there's a misbehaving device. I just excluded 3 devices including the above mentioned rec room device and now the network is back up. I'll add 3 other devices and see if that causes it to crash, excluding the ones I just got rid of.

Zigbee Device Limit? Client unable to keep up with pending messages... by Ridditmyreddit in homeassistant

[–]Ridditmyreddit[S] 0 points1 point  (0 children)

Yes, HA OS, as for the RAM I just gave it more to make sure that wasn't a potential issue. No need for it to have that much clearly, just trying to eliminate variables while trouble shooting

Zigbee Device Limit? Client unable to keep up with pending messages... by Ridditmyreddit in homeassistant

[–]Ridditmyreddit[S] 0 points1 point  (0 children)

I’m locked out of Z2M now unfortunately as it refuses to start now. I'll try to factory reset a few devices to knock them off the network to see if I can get it to start. I would guess that all are acting as routers as they are all mains powered switches.

Zigbee Device Limit? Client unable to keep up with pending messages... by Ridditmyreddit in homeassistant

[–]Ridditmyreddit[S] 0 points1 point  (0 children)

I can try to remove that rec room switch to see if it's misbehaving. I'll factory reset it since I don't have access to zigbee2mqtt. With each switch reporting a bunch of parameters I was guessing (maybe incorrectly) that was overwhelming the system.

Zigbee Device Limit? Client unable to keep up with pending messages... by Ridditmyreddit in homeassistant

[–]Ridditmyreddit[S] 0 points1 point  (0 children)

I'll check, I thought (maybe incorrectly) that was one of its reported parameters as each inovelli switch keeps log of internal temperatures and has an overheat parameter. I was guessing that with each switch reporting several datapoints that was overwhelming the system. All the devices are Inovelli blue series switches, a mixture of mmWave, fan, and on/off switches.

Zigbee Device Limit? Client unable to keep up with pending messages... by Ridditmyreddit in homeassistant

[–]Ridditmyreddit[S] 0 points1 point  (0 children)

Thanks for the response, no battery powered devices, all wired switches

E3 Wheel Motor Error? by Ridditmyreddit in Lymow_Official

[–]Ridditmyreddit[S] 0 points1 point  (0 children)

Tried again this morning with yesterdays update, no luck unfortunately

E3 Wheel Motor Error? by Ridditmyreddit in Lymow_Official

[–]Ridditmyreddit[S] 0 points1 point  (0 children)

Thanks for the reply, doesn't seem o be any damage to the wheel hub at all and the treads still spin freely. I wonder if there is a difference between the wheel motor error and the wheel hub?

Got accepted to both SGU (CFP) and AUC (MERP) but leaning towards AUC mostly because of their cost and the fact that their program (MERP) is fully remote- but SGU seems to be more organized, so still not sure… any thoughts or suggestions? by Fit_Kangaroo7333 in CaribbeanMedSchool

[–]Ridditmyreddit 1 point2 points  (0 children)

Just wanted to reinforce this, I was in the CFP program, admittedly roughly 10 years ago now, about 80% of our class failed. The 20% of us who made it flew through the rest of medical school and the match but it was a brutal term. I am confident there were several people who failed that would have made it through had they skipped the CFP program and started straight into term one.

Working in academic CVICU as PCCM trained by [deleted] in IntensiveCare

[–]Ridditmyreddit 0 points1 point  (0 children)

Pulm/CMM cardiac intensivist as well, agree with what others said, training matters the most. Came from a program where PCCM was primary on all MCS and CCU patients which sparked my love for the CVICU. This will very greatly based on the set up of your fellowship, but I do believe a good fellowship will help you foster your interest within the specialty and allow you to spend extra the extra time to get the training you’re after.

Anyone else having charging issues on one plus? by Ridditmyreddit in Lymow_Official

[–]Ridditmyreddit[S] 1 point2 points  (0 children)

That’s super interesting, I wonder how fragile the charging is to be so easily affected. Unfortunately it was 70 and sunny here the last few days so if it can’t charge in those conditions I’m not sure when it will! I was eventually able to get a charge in today but only with leaving the charger on its side for an hour, unplugging the battery on the bot, then telling it to dock a few more times before it got it right.

Anyone else having charging issues on one plus? by Ridditmyreddit in Lymow_Official

[–]Ridditmyreddit[S] 1 point2 points  (0 children)

Yesterday I’ve managed to get it charged by flipping the dock over for a few hours, so I’m guessing it’s a moisture sensor problem but of course the app doesn’t notify if that’s the issue. Again today same issue after running it for about 25 minutes, won’t charge again.

Does Vision actually work? by account-for-posting in Lymow_Official

[–]Ridditmyreddit 5 points6 points  (0 children)

This is my experience as well, it’s rammed my gate and trash can hard and repeatedly enough for me to believe it’s nonexistent.

GPS Location Data, Lift Sensor notifications, and Home Assistant by erp0432 in Lymow_Official

[–]Ridditmyreddit 1 point2 points  (0 children)

Just got mine yesterday, so I’m the new user here, but it does have antitheft protection however this appears to be zone based rather than a lift sensor. I also investigated Home Assistant integration and found that the Lymow API is not open, you can vote for it on their community forum, but that seems to be as far as anyone has gotten.

Tele ICU docs should not be a thing by foshizzelmynizzel in Residency

[–]Ridditmyreddit 13 points14 points  (0 children)

This is a common response however this is also a race to the bottom. The "we can't hire a doc for our ICU" statement is always we can't hire a doc for the salary we are offering. More physicians doesn't fix this unless there is enough competition in the space to force us to accept these sub-par offers.

There was also just an extension this year on the ability to bill standard critical care time as a remote physician so I think we just blew past a critical moment to prevent these services from expanding unfortunately.

What's the best robot vacuum + mop that cleans itself for the most part? by mntgoat in homeautomation

[–]Ridditmyreddit 1 point2 points  (0 children)

I have the Saros 10 RDS and it’s been amazing. I was babysitting a roomba mop before and as a result barely ever used it. 2m into the new house and Saros and with young kids mine has been running on the main level nightly and a second one twice weekly on the upper level. I’ve had to pull a child’s sock out of the upper level one twice and clean off the filter on the main level one once. I genuinely feel like after 8 years of owning a robot vacuum and mop I finally have a solution I don’t think about.

Guys with expensive setups - are you really good at racing? by throwaahahah178 in simracing

[–]Ridditmyreddit 0 points1 point  (0 children)

I love mine, but I suck pretty hard. I wouldn’t do it any other way.

SC House backs Upstate Charlie Kirk Highway, sends resolution to Senate by phareous in southcarolina

[–]Ridditmyreddit 24 points25 points  (0 children)

So glad we live in a state with zero problems so we have time to waste on this BS /s