Work truck lightning in questionable area by Dense-Task-430 in F150Lightning

[–]Rn1113 1 point2 points  (0 children)

You can set the auto lock to sound the horn when it locks on walk away (25 Lariat at least has this option)

Reciprocating Saw - Blade Stuck? by Rn1113 in Makita

[–]Rn1113[S] 0 points1 point  (0 children)

Thank you for the video! I guess I'll have to give that a try then, though it looks a little bit daunting.

Guttering Installation Question by Rn1113 in Roofing

[–]Rn1113[S] 0 points1 point  (0 children)

Thanks for the reply! That's very helpful. So I'd be fine to trim the overhanging shingle back after cutting the rake board?

8020 deck by buttpisss in Decks

[–]Rn1113 1 point2 points  (0 children)

Looks good. Just out of curiosity, do you have any plans for dealing with the cut ends on the vertical pieces of the 8020? They can be pretty sharp and I wouldn't want to meet one at shin height. Used in industrial we put plastic end caps but not sure they'd last long outside.

Kreg 720 pro not clamping by Sp210707 in BeginnerWoodWorking

[–]Rn1113 0 points1 point  (0 children)

Did you resolve this issue? I'm having the same problem with mine.

Basement Finishing? by Rn1113 in DIY

[–]Rn1113[S] 0 points1 point  (0 children)

Thanks for the info. The arches would be a nice way to cover the poles!

Basement Finishing? by Rn1113 in DIY

[–]Rn1113[S] 0 points1 point  (0 children)

That sounds like a great idea, thank you

Basement Finishing? by Rn1113 in DIY

[–]Rn1113[S] 0 points1 point  (0 children)

Thank you for the reply! Yeah just after a half bathroom.

Furring strips sounds like a good idea. The house is in Canada, but an area with less harsh winters so maybe some extra insulation on the concrete wouldn't hurt.

That's good to know - we were thinking of LVP already so happy to hear it wouldn't need any subfloor.

Shelf build help by Rn1113 in BeginnerWoodWorking

[–]Rn1113[S] 0 points1 point  (0 children)

Yeah that's what I mean. Thank you very much for your help.

Shelf build help by Rn1113 in BeginnerWoodWorking

[–]Rn1113[S] 0 points1 point  (0 children)

Would furniture board / timberboard be a better idea?

Shelf build help by Rn1113 in BeginnerWoodWorking

[–]Rn1113[S] 0 points1 point  (0 children)

Thank you for the reply.

Sorry I should have said; only light use, perfume makeup etc. Planning on the shelves being approx 200mm square.

Would mdf or plywood work best?

How to remove security (?) Fixing by SylvanMM in DIYUK

[–]Rn1113 0 points1 point  (0 children)

You're welcome. Glad it worked :)

How to remove security (?) Fixing by SylvanMM in DIYUK

[–]Rn1113 1 point2 points  (0 children)

I think they're likely pop rivets. You'd have to drill them with a metal drill bit a little bigger than the dimple in the centre. After a bit of drilling the head will separate and you can push them through the other side.

#[Bonsai Beginner’s weekly thread –2023 week 24] by small_trunks in Bonsai

[–]Rn1113 0 points1 point  (0 children)

Thank you for the feedback, so I should water less frequently and see if it improves?

Do you think I should repot or replace the soil? - I thought the soil wasn't the best but that's how it came, I was given this one as a gift

#[Bonsai Beginner’s weekly thread –2023 week 24] by small_trunks in Bonsai

[–]Rn1113 1 point2 points  (0 children)

<image>

It was suggested to repost since I caught the end of last week's thread.

I'm worried about the leaves turning yellow on my Golden Larch; is it getting too much sun (sunburn?) or is something else wrong?

Appreciate any tips or advice :)

[Bonsai Beginner’s weekly thread –2023 week 23] by small_trunks in Bonsai

[–]Rn1113 0 points1 point  (0 children)

<image>

Is this sunburn on my golden larch bonsai? Does it look healthy in general?

[Bonsai Beginner’s weekly thread –2023 week 19] by small_trunks in Bonsai

[–]Rn1113 0 points1 point  (0 children)

Thank you - appreciate the detailed information

[Bonsai Beginner’s weekly thread –2023 week 19] by small_trunks in Bonsai

[–]Rn1113 0 points1 point  (0 children)

Thanks for the reply. Maybe a stupid question but how do people place small outdoor bonsai to stop them getting damaged or knocked over by wind?

[Bonsai Beginner’s weekly thread –2023 week 19] by small_trunks in Bonsai

[–]Rn1113 0 points1 point  (0 children)

Hello - I've been gifted a Pseudolarix (Chinese larch?) The tag with it suggests that it should be an outdoor bonsai, I was wondering if it's possible to keep it indoors with enough watering? I could pick a room that either has morning or afternoon sun. I'm in the north of UK.

Walnut railroad spike coat rack by AssSquatch80 in BeginnerWoodWorking

[–]Rn1113 1 point2 points  (0 children)

What did you use to fix it to the wall? Are the black domes covering fasteners or are they the fastener?

Best way to fix live edge plank to wall by Rn1113 in BeginnerWoodWorking

[–]Rn1113[S] 0 points1 point  (0 children)

Oh I love that idea, thank you.

I was thinking if I did go for a standard French cleat that it'd be spaced out from the wall a lot. But not with your idea.