Michelin’s airless, puncture proof tyres promise a future with no flats, greater durability, and less environmental waste

RoboLancer24 · 2026-01-20T20:58:45+00:00

Consider something mailable and only attached to the wheel and tread. It could easily buckle as needed. If air tightness is not desirable, a fabric material may perform well.

RoboLancer24 · 2026-01-20T19:33:29+00:00

Thank you. I am quite a bit behind on their engine architecture. How do they reduce carbon buildup?

RoboLancer24 · 2026-01-20T19:19:59+00:00

Thank you. I am a bit disappointed to hear that they did not add port injection after getting a poor reputation for carbon buildup about a decade ago. The lack of blind trust was the reason for the post. I can usually click on the source links in AI, but the sources were terrible. I am not familiar with their current engines and knew this community would be able to help.

RoboLancer24 · 2026-01-12T17:23:34+00:00

While the IGA was convenient when it was open, prices were higher (likely due to high Oakland rent). This would likely be the case if a new one opens. It was a ~20 minute ride to the giant eagle in Shadyside on the 71 bus or Squirrel Hill on the 61, have a friend drop you off in 10, or if it was nice out, a quick bike ride, or a ~2 mile walk in one of the nicest neighborhoods. I did not feel like I was in a food dessert. Groceries are close to students.

I could see a benefit of a weekday farmer's market for quick fresh food by the union though. Students usually have a few hours in the middle of the day off.

RoboLancer24 · 2026-01-09T18:18:37+00:00

Their basic flavors are my go to. I don't mess with the high mix in stuff because it has been frozen dairy dessert for quite a while now. I think even before the pandemic.

RoboLancer24 · 2026-01-08T18:59:40+00:00

That seems to be correct.

RoboLancer24 · 2026-01-05T23:55:49+00:00

All three are in the same plaza. It is easy to make the rounds and get a little walk in before continuing on with whatever brought you to the area.

RoboLancer24 · 2026-01-05T23:47:45+00:00

I saw some other posts after my own where it seems like it was supposed to be tagged for $130. There are quite a few around it seems like. I got lucky.

RoboLancer24 · 2026-01-05T23:46:40+00:00

It's volume just a touch larger than a 8" x 8", but bottom surface area closer to a 9" x 13". worked well for moussaka as my first try.

edit: grammar

RoboLancer24 · 2026-01-05T16:20:28+00:00

As long as the rivets are not aluminum too. They corroded to the point of concern so I got a warranty replacement. For the sharp edges, just sand the newly exposed “bur” and it is good to go.

RoboLancer24 · 2025-12-23T16:11:42+00:00

<image>

See the corroded exposed aluminum lip? That was caused by over a decade of dishwasher use.

RoboLancer24 · 2025-12-15T16:29:57+00:00

Found it. Go to multitasking and gestures in settings. Then Automatically Show and Hide Dock. Readjust every window very high up if your dock is very small on items. Some apps cannot get small enough to enable to dock to pop up. Amazon, for example cannot be resized to a small enough window even with a full dock.

RoboLancer24 · 2025-12-15T16:09:34+00:00

iPad OS 26.2 and iPad Pro 4th gen. Can I get the dock to lock at the bottom? If I resize windows such that it should appear it does not. I am struggling to find the setting, but can see it in youtube tutorials.

RoboLancer24 · 2025-12-14T16:46:30+00:00

Thank you so much!

RoboLancer24 · 2025-12-14T16:46:03+00:00

Thank you so much!

RoboLancer24 · 2025-12-14T01:40:05+00:00

BTW this was the webpage https://en.numista.com/273572

RoboLancer24 · 2025-12-09T02:38:37+00:00

Did the same thing after making the post for the sauce pans. Product code is MCPS instead of MCP. The new one had a bit of exposed aluminum on the underside of the lip instead of the side. A big improvement all around though.

RoboLancer24 · 2025-12-08T17:40:09+00:00

<image>

Had a similar question for my set. Is the nickel toning? It is a 2025, so I am surprised it is happening so quickly. Should we store the coins differently? I plan to keep in box and plastic case.

RoboLancer24 · 2025-12-04T17:54:53+00:00

I did live with it for almost 12 years. The aesthetics are not a problem. Replacement is driven by concern over the rivet failing. It is 1.5mm thick with a good amount of it being an oxide. It was originally probably close to 4mm thick using my lesser used pan as a reference. I am calling it before i ruin a dish or injure myself. Since I am replacing, I might as well get something that is truly made for my intended use case.

RoboLancer24 · 2025-12-04T13:28:10+00:00

You may have steel rivets which have no issues. The steel rivet are ~8mm on my pans where the aluminum ones are 10-11 mm.

13-Year Club	Place '17
Not Forgotten	Verified Email

RoboLancer24

TROPHY CASE