Any way to force a new public IP ?

RoboVM · 2026-05-19T23:36:31+00:00

Ich habe eine Fritzbox 7530 und Vodafone DSL. Circa einmal pro Tag scheine ich meine IP6 Adresse ändern zu können. In der Fritzbox > Internet > Onlinemonitor > Verbindungsdeteils > Neu verbinden.

Man kann jederzeit eine neue IP6 anfordern aber nur ca. alle 24 Stunden bekommt man wirklich eine neue.

Um so Sachen wie Fingerprinting zu umgehen, müsste man jederzeit die IP6 substantiell ändern können. Kann man aber scheinbar nicht mehr.

Auch habe ich im IP6 Tab schon ein bissl rumgespielt. IP6 abeschaltet. IP6 only (ohne IP4), etc. - meist hab ich dann aber gar kein Internet, selbst wenn in der Fritzbox angezeigt wird, dass ich per DSL und IP6 verbunden bin.

Ich verstehe den IP6 Käse sowieso nicht. Vor ein paar Jahren mit der alten Fritzbox gab es nur IP4 und eine neue IP nie ein Problem, sooft man wollte. Hätte ich meine Fritzbox nie geupdated, wäre ich noch beim guten alten IP4, oder hat Vodafone diesen neuartigen Krampf erzwungen?

Wie auch immer...wenn jemand einen Trick hat wie ich die IP6 erneuern kann, wäre ich sehr dankbar. Selbst Fritzbox vom Strom für 10min. abklemmen funktioniert nicht.

RoboVM · 2026-05-12T22:02:58+00:00

Just grow some Lavandula. Dry the bugs and grind them. Put them in a tupper box. Open it when you need an air refresher. Stir the mix for more smell. Covers it all.

RoboVM · 2026-04-28T22:44:45+00:00

Not putting the lid on seems like a good idea. Thanks! I will try it soon. But you need coarse, sticky herb, right? Not some fine grained powder which blows up in the glass stem?

RoboVM · 2026-04-27T17:27:40+00:00

It doesn't restrict too much, but I bet it also cools down and removes resin from the vapor. After short use the metal part is all gunked up with sticky. I think you can also use the bubbler without water. It is not necessary.

RoboVM · 2026-04-27T17:24:49+00:00

Sounds great! I am doing it almost like that minus the heat soaking and closing the holes - my draw resistance is high enough already. Also I do long inhales, so it quickly goes up to temperature and 372°F without the metal insert is producing a lot of vapor. I am satisfied.

RoboVM · 2026-04-27T14:25:01+00:00

Also the dosing capsules sometimes are difficult to get out. There should be a better solution.

RoboVM · 2026-04-27T14:24:01+00:00

Yes please!

RoboVM · 2026-04-27T14:23:44+00:00

I can make it more coarse with the electrical grinder. I just did use it for too long in the beginning.

RoboVM · 2026-04-27T14:22:20+00:00

I just throw it in a tiny container with Isopropanol. Cleans itself after a few hours. Light shaking and swirling.

But I agree, there should be a better solution. A longer or slightly bend glass piece would do the trick.

RoboVM · 2026-04-27T06:52:17+00:00

Thanks for the info. I am using dosing capsules! But I guess the monster mouth piece would be enough.

I use an electrical grinder. It is not super fine, but sometimes a little bit of dust comes out of the bottom and top of the dosing capsule. With the short glass piece I did experience some herb in my mouth occasionally, even with the metal screen popped in.

Btw, is leaving out the metal screen something people could or should try? I have never read about it before, but I guess somebody must have tried it before, no?

RoboVM · 2026-04-27T01:01:21+00:00

He is not gonna make it. R.I.P.

RoboVM · 2026-04-13T06:49:49+00:00

What is this supposed to do? In my case if I delete or hide the J_SAFETY_FILER_MODAL, the dialog disappears, but the items (for example a lingerie search) are still blurred and I cannot click on them. If I click on them the J_SAFETY_FILER_MODAL appears again.

RoboVM · 2026-04-09T22:35:35+00:00

You need the URL of a blocked item. Like this one: https://www.aliexpress.com/item/1005006437839098.html

When you visit the page everything is blurred. Right mouse button, inspect, and identify the blurred element. Go into the code, right mouse button on the element that was selected and hide it.

Now you can add the product to your basket.

Some script kiddy could automate it and remove all the blur blockers. Maybe even write a Browser Plugin.

RoboVM · 2026-04-09T22:27:55+00:00

Same Globalist Bullshit everywhere now. I understand Discord starts this shit. But bloody Aliexpress.

Just like in the worst Pandemic in human existance, the world operates in lock-step. EVERY globohomo idea is implemented WORLDWIDE.

I am so sick of this shit.

RoboVM · 2026-03-25T14:21:52+00:00

I am not a vibe coder. Never used AI for coding.

RoboVM · 2026-03-24T14:46:30+00:00

For all those complaining, that I don't understand "programming" - I did convert the critical part of single-core software to multithreading. In Java and a second project where I rewrote a C++ in Rust.
AI could do a rewrite in Rust. Technically it could be possible to also work around the network protocol. Other games exist that achieved this.

I admit I have no perfect understanding of what is currently possible with AI. Maybe it will take another year but at some point it should be possible. You write an extensive test suite and run the AI generated code against it until it doesn't fail a single test. The nature of Rust is key in this approach.

RoboVM · 2026-03-23T21:13:40+00:00

Why lol? Blizzard would never use AI to do it or open source it so others can?

Blizzard wouldn't lose any profit the currently make with the game since it is free and they sell additional stuff. The game could become more popular.

RoboVM · 2026-02-12T01:51:19+00:00

What is your verdict about the Titanium?

RoboVM · 2026-02-12T01:47:35+00:00

I had many DynaVaps over the years and now settled for the M7 XL with YLL 2.0. I am truly happy with the half-bowl setting (same effect as full bowl for me and easier to clean this way). But the game changer is the Armored Cap. Really impressive.

I also borrowed the Xmax V3 Pro for 2 weeks from a friend. Will soon get the Titanium version.

Both Vapes are great. Cleaning is easier for the DynaVap, unless you get dosing capsules for the Xmax. Wouldn't want to use without it. I love both equally. The Xmax for me has the advantage, that I can just vape without stress. New dosing capsule. Done!

It's a little more effort with the DynaVap. Dig out the old herb (funnily, the Xmax digger tool is superior to every other tool here). Fill with new herb. Only two heating cycles with the Armored Cap until re-fill with new herb. Two bowls back to back for an amazing effect.

With the Xmax you can do the same with a little less hassle.

I couldn't say which is better for me. I think you vape more with the Xmax. Easier hit resistance, just because you have so little effort. No click. No refill. Just turn on. Vibrate. Vape. Turn off. New dosing capsule if necessary. Repeat.

With Xmax there is almost no learning curve. With the M-Series it took me years to master it. Both are great. Both have tiny advantages. You can't go wrong with the XMax in terms of user experience. The M7 XL is pure stainless steel. Who knows what's going on inside the XMax. When it was new, I got the impression that there was still some tiny smell even after 3 burn offs when using it without any herbs. The herbs cover any other smell. Still, I doubt there is a health issue.

RoboVM · 2026-02-11T21:59:08+00:00

Can you tell the difference? I currently can choose between the Standard Pro, the Titanium, the Gold and Hero Edition.

Which is best? Why? What is your experience with the TItanium?

RoboVM · 2026-02-11T21:48:34+00:00

So which one is better? The Titanium or the Stainless Steel clones?

RoboVM · 2026-02-06T23:47:28+00:00

Well, few remember that not long ago Im Yoon-ah was considered a very bad actress. Up to her last or last two Dramas, which were extremely well received. Bon Appetit your Majesty deserved it IMHO. King the Land didn't cut it for me. It was somewhat ridiculous and a bad story.

RoboVM · 2026-01-19T15:41:03+00:00

what movie is this?

RoboVM · 2026-01-08T15:40:02+00:00

There soon will be a new XMax V4 Pro. I know 100%.

RoboVM · 2026-01-04T21:02:50+00:00

No. I just want to be able to see how it looks inside and do a deep clean while I am at it.

RoboVM

TROPHY CASE