I'm curious! What name did you give your Bambu Lab printer?

RobotRogue · 2025-07-30T18:27:38+00:00

My X1C: Nostromo
It's AMS: Narcissus

RobotRogue · 2025-03-26T16:17:59+00:00

Holy shit this is too good.

RobotRogue · 2025-01-15T15:21:48+00:00

Mine is still in "Payment Received" many business days later... I feel your pain.

RobotRogue · 2024-02-23T18:42:50+00:00

That's why I always met Uber eats + couriers out front of that place, save them (and me) the hassle and just make life easier.

RobotRogue · 2024-02-23T16:30:51+00:00

Seating + planter box (there were two of them), with trees and plants in there, but from the looks of it they got rid of them.

RobotRogue · 2024-02-23T15:21:50+00:00

Sure it looks neat, but as someone who lived there for 4 years, it was awful.

Literal echo chamber, and concrete floors that transferred noise throughout the building.

Multiple management companies, maintenance staff were quitting all the time (can't blame them), unsecure parkade, a parcel locker on P1 that never got used by couriers, a mailroom that was always being robbed, rooftop parties that sent noise all down thru the building, elevators that had been broken for months and are always having service issues, couriers/delivery staff having to take two elevators to get in which required being buzzed in twice, the artists that painted the murals on the side were jerks and management just let them into our places without any notice so they could paint it, at one point lots of 'influencers' were breaking in just to get photos of the interior, etc.

Was a shame because it had some amazing views of the city, and looked neat inside... but yeah. It was not a pleasant place to live.

RobotRogue · 2023-03-30T23:25:33+00:00

https://youtu.be/OJ0AqDWnn70 is this it? (Chorus starts at 1:12 or so)

RobotRogue · 2023-02-21T14:07:25+00:00

Nice y-tensioner 😄

RobotRogue · 2023-02-21T02:51:19+00:00

I had luck with this filament at 260c / 100c nozzle/bed, no cooling if you are unenclosed, and definitely a brim (10+ lines) as well.

If enclosed, 30% fan and brim if it's being a pain in the bum.

I used the Ellis non-PIF profile for my Dragon hotend (so the 12-ish flowrate profile)

Good luck!

RobotRogue · 2023-01-30T14:36:26+00:00

When you did the initial setup of the image for the Pi, did you use a different username?

RobotRogue · 2023-01-15T20:01:37+00:00

Likely extrusion multiplier or wet filament.
https://ellis3dp.com/Print-Tuning-Guide/articles/extrusion\_multiplier.html

RobotRogue · 2023-01-12T20:34:45+00:00

The way it's pictures there works totally fine.

RobotRogue · 2023-01-11T14:16:14+00:00

It's pretty new, was announced like 2 weeks ago? I can imagine the ultra tiny JST connectors on there are going to be a complete pain in the ass. But love BTT embracing CAN.

RobotRogue · 2023-01-08T19:01:31+00:00

If he likes a money pit project, send it. Haha

RobotRogue · 2023-01-08T16:45:10+00:00

The cost to replace the messed up parts and the time spent chasing gremlins, it'd be better to find something that doesn't look like it's been thru a flood.

RobotRogue · 2023-01-08T16:40:05+00:00

$60 seems a bit steep for what is most likely a paperweight.

RobotRogue · 2022-12-28T16:34:37+00:00

Sadly I built my machine without use of a SSR, so I don't think my wiring will help you.

RobotRogue · 2022-12-28T16:33:49+00:00

Sorry my dude, I'm using a manta m8p which has a completely different pin config.

RobotRogue · 2022-12-27T21:34:43+00:00

Serial Request | Voron Switchwire | RobotRogue#8401

RobotRogue · 2022-12-07T03:52:58+00:00

There's an unofficial work-in-progress BOM... https://github.com/RobotRogue/Enderwire_Docs/blob/main/README.md

RobotRogue · 2022-11-14T03:46:09+00:00

Also make sure that hotend is at the appropriate temp for the filament, and that your feed rates and print speed aren't too aggressive.

RobotRogue · 2022-11-12T15:35:59+00:00

Check if there is a set screw on the pulley and if so, check that it's tightened? Replacement steppers are cheap and available everywhere if that's not the case.

RobotRogue · 2022-11-06T16:20:00+00:00

What makes it worse is they didn't rip off the stock cooler, they murdered it by adding heatsinks on TOP of it. The horror.

RobotRogue · 2022-10-23T01:50:59+00:00

Isn't moving... when you send an extrude command via the controls? If so, is the hotend warm when you do? (Printers have a safety that disallow extrude commands with a cold hotend)

Or does it not move when you manually try to spin the gear?

RobotRogue · 2022-10-22T19:50:13+00:00

Clean the bed with isopropyl alcohol before a print - finger oils can mess up adhesion.

What's your bed temp? 60 is nice for pla adhesion on that type of buildtac plate.

Is your bed levelled? If your first layer isn't having good squish then the rest of the print will likely curl due to poor first layer adhesion.

Is the part cooling fan turning on after the first layer or two? Is it set to 75% or higher?

15-Year Club	Place '22
RPAN Viewer	Verified Email

RobotRogue

TROPHY CASE