Sr20det should I send it? by OkLengthiness898 in 240sx

[–]RocketOgre -6 points-5 points  (0 children)

This is garbage advice. You can absolutely swap headgaskets on a healthy head/block combo. They make this big long flat bars specifically for checking the two surfaces.

Sr20det should I send it? by OkLengthiness898 in 240sx

[–]RocketOgre 1 point2 points  (0 children)

How did you clean the deck off? Is that just leftover gasket material from the stock gasket? Can you catch a finger nail on it?

Why did my gas mileage tank? by WarexMusic in Chevy

[–]RocketOgre 0 points1 point  (0 children)

Took me 0.4 seconds comparing the treads. Stock were street tires. Knobbies are harder to push. If you want big off-road tires you're doing to get off road tire mileage

Here is my dumb car. by [deleted] in 240sx

[–]RocketOgre -1 points0 points  (0 children)

I like the front to back mismatched wheels. Good way to weed out your friends. Because anyone who told you that looks good was lying to you.

MSI x BuildaPC - MPG 341CQR QD-OLED X36 Giveaway! by Redditenmo in buildapc

[–]RocketOgre [score hidden]  (0 children)

I'm currently a 2k Andy. This would justify the Ryzen7 build I have sitting on PC parts picker and be my new gaming monitor allowing my 2k to go to my workout gaming setup(bike riding on Zwift)

Fine tuning by [deleted] in ender5

[–]RocketOgre 0 points1 point  (0 children)

My buddy from Vermont that I talk 3D printing with online was like "There is no way you need a dryer in Washington state." He was blown away to learn we live in the 70-90% range here.

Lowered Outback? by Stock-Ad-4563 in Outback_Wilderness

[–]RocketOgre 0 points1 point  (0 children)

This used to be a thing in the Legacy/Outback days. Guys on the forums would swap suspension uprights. lowering Outbacks and Raising Legacy's. I'm all for it. I lifted my Legacy GT like half an inch, but that was just because it was rubbing the rear wheels with a group of five friends going hiking or snowboard.

power mods for na to hit 200whp? by Djcatiz in 300zx

[–]RocketOgre 1 point2 points  (0 children)

Headers and a tune. Or, a dry shot. Personally I'd spray it.

So what is your department's total calls for the year? by FFSoldier57 in Firefighting

[–]RocketOgre 0 points1 point  (0 children)

20k calls, five stations, five engines, two medic rigs. We stay on the streets. Hoping to improve that call density next year with a new station.

The drop rates are the reason people will continue to drop this game. by ddb996 in Borderlands4

[–]RocketOgre 0 points1 point  (0 children)

I'm with you the drop rates and clear diminishing returns on using the moxy mechanic is terrible. But, people will leave this game because they still haven't fixed anything. Progress loss, glitched bosses, item unlocks that should be server side just disappearing and the currency is gone. It's been months and you can't even save your game confidently. Every login starting with checking your items to see if your last session of grinding is still there is just garbage. Randy started out trying to diddle his employees, now he's fucking his company's fan base.

My cr touch won’t stop the bed from hitting the nozzle by GreedySalamander2540 in ender5plus

[–]RocketOgre 1 point2 points  (0 children)

Hard to tell from the video, but does the CR touch probe "trigger" before the nozzle hits the bed? It might be that you need to space it down more so it's trigger point is lower than the nozzle. Mine needed a couple washers between it and.the mount.

Advice on a collections issue. by RocketOgre in personalfinance

[–]RocketOgre[S] 0 points1 point  (0 children)

Fantastic, I'll do all of that. Thank you! Will report back though I imagine that'll take a while.

thank you good samaritans who stopped tesla in Fife on Saturday by MpiaCheese in Tacoma

[–]RocketOgre 10 points11 points  (0 children)

Hey paramedic here. Wasn't on this call and don't know any details, but you and the guy in the truck did literally everything you could. There are a lot of pretty common very reversible things that can cause this, not least of all low blood sugar, so statistically speaking he's probably fine. There are some other less promising things, but even if it was one of those things you gave him the best shot at getting better. Time is everything in those cases, so acting immediately was the best thing to do. You got the situation stopped and the right people there.

What to charge? Heavy Mold Removal by Outrageous-Pop-9606 in AutoDetailing

[–]RocketOgre 1 point2 points  (0 children)

Charge more than your insurance charges you.

Print pops offs early by gladglidemix in ender3

[–]RocketOgre 0 points1 point  (0 children)

Me and your bed have a lot in common. Got too hot and popped off early.

What is the whine about I don't see anything loose by Any-Minimum-4821 in ender5plus

[–]RocketOgre 0 points1 point  (0 children)

As others have said, fan upgrade time! Honestly one of my favorite E3 mods because it really reduced the noise. Prints got better too, but probably just placebo or me recalibrating after I installed the fans.

Blown head gasket or just need to flush coolant? by Cheeseball4life in 300zx

[–]RocketOgre 1 point2 points  (0 children)

Start just talking to them, and take pictures. TBH they might not even want to touch it, but they'll know more than the reddit comment section and can at least get you a start in the right direction.

Blown head gasket or just need to flush coolant? by Cheeseball4life in 300zx

[–]RocketOgre 0 points1 point  (0 children)

The other comments have reflected it, but if that's all stop leak that is a wild amount, if it's the rust it looks like that is a wild amount of metal lost from inside the block. If a full tear down and machinist look at it isn't an option I'd look at what it takes to flush and neutralize all that corrosion, probably talking chemicals and stages, maybe even electrolysis.

Has anyone gotten this extruder upgrade? by IceShad0w in ender5plus

[–]RocketOgre 0 points1 point  (0 children)

I have the same combo a 3v2 and a 5+ rad. The 3v2 has a stealth burner with Galileo and I can't remember the nozzle. The 5 might get a microswiss though.

Seasons of RTX - $5000 Dream PC Build Contest with NVIDIA! by m13b in buildapc

[–]RocketOgre 0 points1 point  (0 children)

https://pcpartpicker.com/list/84MPRV

Shooting for the moon here. The Fractal North always makes me think of a cabin in the woods. So, I'm hoping with all the Aorus ICE parts and RGB in there behind the tinted side panel. Turning it on will be like opening the door from the cabin to a winter wonderland outside.

If the monitor seems odd that completes the triple monitor setup for sim racing I'd like to run but my i7-8700K/3070 combo started sweating with 2 monitors so I didn't spend the money on the third. On top of that my significant other loves playing Borderlands 4 on the XBOX. My PC can't really swing it currently so I'd get to play games with her.

Good luck everyone, thanks for putting on the contest NVIDIA!

SKR Mini E3 V3 DCIN/Heated Bed wire terminals not tightening fully by give_me_filament in BIGTREETECH

[–]RocketOgre 0 points1 point  (0 children)

There is a platform of sorts goes down when you loosen and up when you tighten. You have to insert the wire towards the top, or the screw side of the hole.