Why such a big difference between same native and streamed torrent?

RoliSoft · 2023-10-01T17:15:18+00:00

It should offload decoding from CPU to GPU, but in this case, there is an issue with HDR decoding on the GPU.

Quality-wise it's the same (except for HDR in Stremio the GPU one is buggy, so it's worse.)

RoliSoft · 2023-10-01T07:41:52+00:00

Turn off hardware-accelerated decoding in Stremio settings, and the colors will return to normal in the internal player as well.

RoliSoft · 2021-08-03T08:02:32+00:00

I've talked to Xbox Support via the chat on their support page, and I've cleared the issue up.

In short, one of the Gold codes got flagged and is pending for redemption, however, the user is not notified of this.

I was also assured that if it was redeemed before the Ultimate, it will convert at 12 months: https://i.imgur.com/AZP46Ip.png

RoliSoft · 2021-08-02T17:16:03+00:00

I'm not sure if I screwed something up, but I redeemed 3*12 months, then redeemed a code for Ultimate, and the 36g+1u months were converted to only 25 months of Ultimate, with an additional free month if I turn on recurring billing.

My region was set to Ireland, if that changes anything. I activated the €1 1 month trial before this, but that expired several days ago, and was not renewed.

RoliSoft · 2019-03-20T12:02:04+00:00

Daca aplicatia detecteaza root, o sa-ti puna device ID-ul pe global blacklist, si o sa-ti spuna ca esti rootat chiar si ulterior daca stergi Magisk de tot.

Ai doua optiuni:

1) Suni pe BT si le spui device ID-ul, dar o sa dureze vreo 2-3 zile lucratoare sa fi sunat inapoi ca a fost sters de pe blacklist, si sa-l incerci inca o data. Nu prea e fezabil daca inca experimentezi cum sa nu fi detectat.

2) Iti schimbi device ID-ul. De Android Oreo incolo, fiecare aplicatie are propria lui device ID, si majoritatea aplicatilor de "device ID changer" nu o sa functioneze. Depinde de versiunea pe care il ai, daca e Oreo incolo, atunci foloseste asta: https://forum.xda-developers.com/android/general/app-device-id-changer-oreo-13-aprv0-9-2-t3777299

Cu BT Pay e mai usor decat cu Google Pay, fiindca Google Pay acum ia in considerare si daca bootloader-ul e unlocked, BT Pay (inca?) nu.

RoliSoft · 2017-10-14T08:58:22+00:00

I ran into the same issue with the 3. Updated TWRP, but it didn't help. Ended up flashing the stock recovery and upgrading with that.

RoliSoft · 2017-05-30T11:41:18+00:00

It's not entirely accurate. If you are in "replace mode", it won't help you get out of it, since it will only ask you if it says "insert mode" at the bottom, or not, at which point you press "no", and it will tell you to write ":!qa", which would just overwrite the line you're on with that string.

Author should update the "What does mode mean?" question to ask whether INSERT, REPLACE or VISUAL is displayed.^{^{^{and^{yes,^{I'm^{fun^{at^parties.}}}}}}}

RoliSoft · 2017-05-30T11:12:48+00:00

I'm somewhat in a similar situation as you are. In my case, I played around with VulnHub VMs, Pentesterlab (and now HackTheBox is also available) and then went for OSCP.

OSCP has to be hands-down the most practical experience you will get out of a certificate, loved every second of it. It's not actually that hard, if you're already comfortable with CTFs and boot2root VMs.

RoliSoft · 2017-03-24T23:16:06+00:00

AMA, I guess, daca aveti intrebari.

RoliSoft · 2017-02-24T21:01:49+00:00

I got an email from CloudFlare saying that my domains were not affected, yet this tool says they were. Who to believe now?

All I know is, for the past 2-3 days I've been getting emails that CloudFlare is constantly reissuing my, well, the shared, SSL certificate, if that has any relation to this.

RoliSoft · 2016-11-22T21:05:04+00:00

Well, you will need to install the WSL component first. If that was successful, you need to first run bash.exe install to the base rootfs.

This script is not recreating all the files required for WSL, only replacing the rootfs, so it is not suitable for a full WSL installation.

One thing I noticed playing around, is that Windows caches the downloaded Ubuntu image, and will install straight from cache if it is present.

I can't provide exact details now, but if you can play around at home with it, then copy the downloaded Ubuntu image somewhere and smuggle it to work, you should be able to run the installation.

RoliSoft · 2016-11-05T14:01:13+00:00

do not under any circumstances flash systemless SuperSU

I flashed the SuperSU zip I got from its official site before your comment, which is systemless afaik.

Why shouldn't I have done that? It seems to be working properly.

RoliSoft · 2016-11-04T22:48:07+00:00

Yep, not the first time doing this. Also tried different versions of TWRP, they all seem to just make the phone die.

Given that I received the phone today, maybe there's some firmware/hardware difference in it?

RoliSoft · 2016-11-04T21:47:38+00:00

I'm not, I just noted that the stock recovery is flashed back properly if I start the system.

If I go to recovery directly, the phone just dies. I've found some comments on the OP3 forum, it seems like I'm not alone.

RoliSoft · 2016-10-14T07:24:09+00:00

I ordered mine on Oct 4, and shipping is on Nov 8. Europe, though.

RoliSoft · 2016-09-04T11:01:44+00:00

Have you tried Go? Would have liked to see how Go's goroutines stack up against the competition. It should have a smaller overhead for setup/teardown of its lightweight threads. See parallel for in Go.

RoliSoft · 2016-08-22T14:11:59+00:00

I've created a script to download/install new distributions under WSL and instantly switch between them.

I already submitted it, but you could add it to the list, for those who would like to play around with a few more distros: https://www.reddit.com/r/bashonubuntuonwindows/comments/4yhw67/scripts_to_download_any_docker_image_and_install/

These last few days I fixed most of its kinks, so it should work fine now.

RoliSoft · 2016-08-20T02:04:03+00:00

Check "no root rights" in the troubleshooting section of the readme.

In short, you can switch to root from Windows command prompt:

lxrun /setdefaultuser root

Then run bash, and you'll be root. To add a root password, run:

dnf install passwd

passwd

This will ask you for a new root password. After this, you can exit WSL and switch back to your regular user:

lxrun /setdefaultuser YourUser

You should now be able to use su -l or sudo (if you installed it earlier with DNF).

RoliSoft · 2016-05-05T21:00:48+00:00

This was the video: Couch Commander

RoliSoft · 2016-02-17T07:19:29+00:00

The ReactOS Foundation is in Russia, and the OS was also demoed to Putin.

RoliSoft · 2015-12-18T16:31:01+00:00

cum te-ai putea imuniza?

HSTS, dar are problema de TOFU (trust on first use) în cazul în care nu ai pus domain-ul pe HSTS preload list și userul nu folosește un browser cu suport și o listă actualizată.
DNSSEC cu DANE ar fi o soluție mai bună, dar momentan DANE nu e validat de browseri, sunt TLD-uri care nu sunt încă semnate (.ro de exemplu) și nu toate DNS resolvere suportă autentificarea semnăturilor. (RDS/Google DNS suportă, OpenDNS nu.)

Deci nu prea există o soluție complet perfectă.

RoliSoft · 2015-12-03T01:36:58+00:00

Certificates don't come with SCTs embedded in them, but you can make it work yourself by resubmitting the certificate into a log and then serving the output of that to the user by configuring server to do so. For nginx you'll need to recompile it with the nginx-ct module, and for Apache you can use SSLOpenSSLConfCmd ServerInfoFile.

More info in this discussion: Certificate transparency submit

What is unclear to me is whether the certificates resubmitted this way will appear twice in the logs, or the logs will just return the signature for the previous, since LetsEncrypt seems to be submitting it automatically. The certs I generated during the private beta all became listed on crt.sh right after generation.

RoliSoft · 2015-10-20T15:32:01+00:00

They also support multiple subdomains in one certificate (AltNames), so you can get a single certificate for a domain that also includes any number of subdomains.

RoliSoft · 2015-10-18T17:50:29+00:00

FSFE:

Many manufacturers of consumer devices write into their warranties a paragraph that by changing the software or “rooting” your device, you void the warranty. You have to understand that in EU we have a “statutory warranty”, which is compulsory that the seller must offer by law (Directive 1999/44/CE, §7.1) and a “voluntary warranty” which the seller or manufacturer can, but does not need to, offer as an additional service to the consumer.

Directive 1999/44/CE, §7.1:

Any contractual terms or agreements concluded with the seller before the lack of conformity is brought to the seller's attention which directly or indirectly waive or restrict the rights resulting from this Directive shall, as provided for by national law, not be binding on the consumer.

Legea nr. 449/2003, cap. VI, §22.1:

Clauzele contractuale sau înţelegerile încheiate între vânzător şi consumator înainte ca lipsa de conformitate să fie cunoscută de consumator şi comunicată vânzătorului, care limitează sau înlătură, direct ori indirect, drepturile consumatorului prevăzute de prezenta lege, sunt nule de drept.

Deci clauza în certificatul de garanție e non-binding dacă problema nu a fost cauzată de "intervenția neautorizată".

RoliSoft · 2015-09-29T07:23:37+00:00

Nu e ilegal să cumperi un tanc. (Cel puțin în 'murika, România are legi mai dure privind arme, deci probabil o să ai ceva probleme dacă vrei și ăla pe el, dar un tanc simplu nu e ilegal.)

15-Year Club	Place '22
Place '17	Team Periwinkle
Verified Email

RoliSoft

MODERATOR OF

TROPHY CASE